Age and early metamorphic history of the Sanbagawa belt: Lu–Hf and P–T constraints from the Western Iratsu eclogite

Two distinct age estimates for eclogite-facies metamorphism in the Sanbagawa belt have been proposed: (i) c.  120–110 Ma based on a zircon SHRIMP age for the Western Iratsu unit and (ii) c.  88–89 Ma based on a garnet–omphacite Lu–Hf isochron age from the Seba and Kotsu eclogite units. Despite the contrasting estimates of formation ages, petrological studies suggest the formation conditions of the Western Iratsu unit are indistinguishable from those of the other two units—all ∼20 kbar and 600–650 °C. Studies of the associated geological structures suggest the Seba and Western Iratsu units are parts of a larger semi-continuous eclogite unit. A combination of geochronological and petrological studies for the Western Iratsu eclogite offers a resolution to this discrepancy in age estimates. New Lu–Hf dating for the Western Iratsu eclogite yields an age of 115.9 ± 0.5 Ma that is compatible with the zircon SHRIMP age. However, petrological studies show that there was significant garnet growth in the Western Iratsu eclogite before eclogite facies metamorphism, and the early core growth is associated with a strong concentration of Lu. Pre-eclogite facies garnet (Grt1) includes epidote–amphibolite facies parageneses equilibrated at 550–650 °C and ∼10 kbar, and this is overgrown by prograde eclogite facies garnet (Grt2). The Lu–Hf age of c.  116 Ma is strongly skewed to the isotopic composition of Grt1 and is interpreted to reflect the age of the pre-eclogite phase. The considerable time gap ( c.  27 Myr) between the two Lu–Hf ages suggests they may be related to separate tectonic events or distinct phases in the evolution of the Sanbagawa subduction zone.     

流褶层及韧变带研究

流褶层与韧变带是地壳拉伸变形，顺层固态流变作用下的产物。流褶层是以原始层理为变形面或再经递进变形的褶皱变形岩层或岩石共生组合层位。韧变带具明显的层控性，受岩石成分和应变程度控制，不同环境和不同成分岩石的韧变带具有相异的组合型式和变形机制，井具有一定的递变规律。流褶层和韧变带可分属不同层位，但流褶层可实现向韧变带的转化。     

太平洋三海区热液烟囱物的氧同位素特征及形成温度

使用氧同位素方法 ,测试了西太平洋马里亚纳岛弧、马里亚纳海槽、冲绳海槽和东太平洋加拉帕戈斯裂谷的海底热液烟囱和硫化物全岩样品。结果表明 :马里亚纳岛弧上的埃斯梅拉尔达破火山口的热液硫化物的形成温度最高 (达 2 75℃ ) ,而成为高温产物的代表 ;冲绳海槽和加拉帕戈斯裂谷烟囱 ,表现为中高温类型 ,其氧同位素温度在 1 5 0℃左右 ;马里亚纳海槽以蛋白石为主要矿物的烟囱物 ,则显示出典型的低温热液类型 ,少量黄铁矿砂试样则表现出中温类型特征。但上述区域大都不同程度地存在有闪锌矿、黄铁矿、黄铜矿等中高温热液矿物 ,说明研究区除马里亚纳海槽明显有中低温热液活动类型外 ,其它区域皆具备中高温热液活动特征     

Geochemistry of the Mian-Lue ophiolites in the Qinling Mountains, central China: Constraints on the evolution of the Qinling orogenic belt and collision of the North and South China Cratons

The Anzishan ophiolite, a typical ophiolitic block of early Carboniferous age in the Mian-Lue suture zone of the Qinling Mountains, central China, consists of amphibolites/metabasalts, gabbros and gabbroic cumulates. All of these rocks, as well as those in the Hunshuiguan-Zhuangke (HZ) block, have compositions similar to normal MORB and back-arc basin basalts (BABB) with high ε_Nd(t) values, indicating that they were derived from a depleted mantle source. The Mian-Lue suture zone also contains blocks of other lithologies, e.g., rift volcanic rocks in the Heigouxia block and arc volcanic rocks in the Sanchazi block. Although they are in fault contact with each other, the presence of these different blocks in the Mian-Lue suture zone may represent a complete Wilson cycle, from initial rifting to open ocean basin to final subduction and continent-continent collision, during the late Paleozoic-early Triassic. In this region, the North and South China Cratons were separated by Paleo-Tethys at least until the early Carboniferous, and final amalgamation of both cratons along the Qinling orogenic belt took place in the Triassic.     

Secular variations of the upper crust composition: Implication of geochemical data on the Upper Precambrian shales from the Southern Urals western flank and Uchur-Maya region

In the mid-1980s, it was concluded based on geochemical study that Th, Sc, La concentrations and ratios Th/Sc, La/Sc and Eu/Eu* did not wary significantly in the post-Archean time. It was impossible to judge about compositional variations of upper crust during the Riphean and Vendian, because data of that time characterized a limited number of samples from the post-Archean basins of Australia, New Zealand, and Antarctic. Considered in this work are variations of Eu/Eu*, LREE/HREE, Th/Sc, and La/Sc ratios in Upper Precambrian fine-grained siliciclastic rock of the Southern Urals western flank (Bashkirian meganticlinorium) and Uchur-Maya region (Uchur-Maya plate and Yudoma-Maya belt). As is established, only the Eu anomaly in the studied siliciclastic rocks is practically identical to this parameter of the average post-Archean shale. Three other parameters plot on the Riphean-Vendian variation curves with positive and negative excursions of diverse magnitude, which do not coincide always in time. It is assumed that these excursions likely mark stages of local geodynamic activity, destruction of pre-Riphean cratons, and progressing recycling of sedimentary material during the Riphean.     

Three Alkali-Rich Intrusive Rock Belts Newly Discovered in the Mt. Kunlun-Mt. Altun Region, Xinjiang, China

The newly discovered three alkali-rich intrusive rock belts in the Mt. Kunlun Mt.Altun region of southern Xinjiang are the Lapeiquan-Yitunbulak alkali-rich intrusive rock belt,the Gez-Taxkorgan alkali-rich intrusive rock belt and the Beilisai-Abulash alkali-rich intrusive rock belt. The former two belts were formed during the Yanshanian period, and the third one was formed during the Himalayan period, which is the youngest alkali-rich intrusive rock belt in China. The discovery of the alkali-rich intrusive rock belts is of great significance in shedding light on the history of tectono-magmatic activities in this region.     

南北地震带强震复发间隔的估计

通过对南北地震带各主要断裂带历史强震的时空特点研究 ,试图寻找出带内各主要构造带强震的复发和填充特征 ,并在此基础上研究其差异性 ,对未来各带发生强震的危险性作出估计     

义敦成矿带铜银铅锌锡矿产资源调查评价进展与潜力

义敦成矿带地处独特的大地构造部位，经历了复杂的地质构造演化和强烈的岩浆活动，成矿条件优越，矿产资源丰富。1999年实施国土资源地质大调查以来，相继发现了普朗、松诺、卓玛斑岩铜矿；砂西、热朗泽、夏隆等银铅锌矿；热隆、脚根玛锡矿；打马池觉铜金矿等一批具有重要找矿前景的矿床(点)。该地区矿产资源勘查工作程度低，蕴藏着较大的找矿潜力，有望成为国家级重要的有色及贵金属矿产勘查和开发基地。     

震级加权四指标Blade算法及在地震带识别中的应用

Blade算法的产生是根据地震点的分布寻找地震断层，其优势在于能从较稀疏的点分布中找出线型条带模式，但不足的是完全不考虑地震的震级屑性。针对Blade算法的几个不足之处逐步改进，提出了震级加权四指标Blade算法。算法主要的改进体现在：①引入以震级为变量的权重函数，体现了高震级地震的控制作用，通过模拟与实例比较了三种权重函数的效果；②改进原方法中所挑出的Blade中心必须有地震点，引入四指标评价体系代替原方法的二指标评价体系，同时还根据指标值将挑选出的线型条带修正到更淮确的位置。将原算法与改进算法应用于华北地区4级以上的地震数据集以按寻地震带，结果表明，震级加权四指标Blade算法较Blade算法有显改进，取得了较好的应用效果。