The Fault Block''s Framework in Boli Basin and its Control Over the Deposition

Boli basin, between Yishu fracture belt and Dunmi fracture belt, is the biggest Mesozoic coal basin in the east of Heilongjiang Province. Now it is a fault - fold remnant basin. The basin' s shape is generally consistent with the whole distribution of the cover folds, an arc protruding southwards. The basement of the basin can be divided into three fault blocks or structural units. The formation and evoluation of the basin in Mesozoic was determined by the basement fault blocks' displacement features rusulted from by the movement of the edge faults and the main basement faults.     

安徽巢湖大型平卧褶皱研究

巢湖平卧褶皱由一个背斜和一个向斜组成,枢纽呈NNE向,轴面微向NWW平卧背斜根部倾斜。卷入褶皱的地层为上震旦统至上三叠统,厚达3.1km。褶皱分布面积约380km~2,波长9km,波幅18km。后期直立褶皱叠加于平卧褶皱之上,褶皱缩短量达19.17km,缩短率约53.7％,褶皱受控于大玵台阶状滑脱断层。褶皱地层由NWW往SEE运动,是一种变动滑脱褶皱。     

The Migif–Hafafit gneissic complex of the Egyptian Eastern Desert: fold interference patterns involving multiply deformed sheath folds

The Wadi Hafafit Complex (WHC) is an arcuate belt of orthogneisses, migmatites and other high-grade metamorphic rocks, which marks the boundary between the Central Eastern and the South Eastern Deserts of Egypt. In the WHC, gneissic meta-gabbro outlines macroscopic fold interference patterns characterized by elliptical to irregular culminations cored by gneissic meta-tonalite to meta-trondhjemite. The five main culminations of the WHC have previously been labeled A (most northerly), B, C, D and E (most southerly). A detailed structural investigation of B, C, D and E reveals that these structures are a result of the interference of four macroscopic fold phases, the first three of which may represent a single deformation event. The first folding involved sheath-like fold nappes, which were transported to the N or NW, assisted by translation on gently dipping mylonite zones. The regional gneissosity and mineral extension lineations formed during this folding event. The fold nappes were deformed by mainly open upright small macroscopic and mesocopic folds with approximately NE-trending hinges. As a probable continuation of the latter folding, the sheaths were buckled into large macroscopic folds and monoclines with the same NE-trends. The fourth macroscopic folding resulted from shortening along the NE–SW direction, producing mainly NW–SE-trending upright gently plunging folds. Gravitative uplift is disputed as a component of the deformation history of the WHC. The peculiarities of the fold interference pattern result from the interesting behaviour of sheath folds during their refolding.     

Is there any detachment in the Lower Dolpo (western Nepal)?Y a-t-il un détachement dans le bas Dolpo (Népal occidental) ?

A structural transect in the Lower Dolpo highlights that the deformation and metamorphism of the Tibetan Zone (TZ) increase toward the bottom of the sequence. The contact with the underlying HHC is marked by a metamorphic jump from amphibolite facies in the carbonatic rocks of the upper part of the HHC to greenschist facies marbles in the TZ. Moreover, the HHC and the TZ show different metamorphic histories. The contact zone shows a strain increase accompanied by asymmetric folds with a top-to-the-northeast vergence, connected to a down-to-the-northeast tectonic transport. The contact is interpreted as an extensional shear zone, connected to the South Tibetan Detachment System. To cite this article: R. Carosi et al., C. R. Geoscience 334 (2002) 933–940.     

Curvature analysis of triangulated surfaces in structural geology

This paper addresses the problem of characterizing the shape of a geological surface on the basis of its principal curvatures. The surface is assumed to be modeled as a set of adjacent triangles defined by the location of their vertices and a method is proposed for estimating numerically the principal curvatures at the vertices of the triangles using a local C² interpolant. Also shown is how principal curvatures can be useful for studying the deformation of a geological surface (with application to 3D balanced unfolding), and analyzing the folding or faulting of the interface between two adjacent layers.     

筒桩基础的地震反应分析

本文基于Biot动力固结方程，在BDWF模型的基础上，通过等价线性迭代不断修正土体模量以逼近土体的非线性动态响应，对建筑筒桩基础的地震反应进行了动力分析。为了分析筒桩基础的地震反应，考虑桩-土-结构的动力相互作用，将桩-土-结构地震反应分析的空间体系简化为二维问题计算。结果表明，筒桩基础桩基相对桩基于桩基有较好的抗震性能，筒桩基础的柔性改善了结构的基本周期。     

Sediment transport patterns at Trafalgar offshore windfarm

A simple analytical model of wave propagation has been developed in order to study the potential sediment transport patterns due to the action of currents and waves in the neighborhood of cylindrical structures as well inside a group of these structures. The attention is focused on the study of Trafalgar offshore windfarm, a case in which it has been necessary to analyze the flow trough porous structures in order to model fish growing-cages planned to be installed at each aerogenerator structure. The results are obtained by averaging over one period of wave in order to evaluate the net potential sediment transport. The analysis of the results reveals how the processes of wave diffraction and reflection give rise to periodic patterns of sediment transport around and between the structures.     

Extensional fault and fold growth: Impact on accommodation evolution and sedimentary infill

Extensional faults and folds exert a fundamental control on the location, thickness and partitioning of sedimentary deposits on rift basins. The connection between the mode of extensional fault reactivation, resulting fault shape and extensional fold growth is well‐established. The impact of folding on accommodation evolution and growth package architecture, however, has received little attention; particularly the role‐played by fault‐perpendicular (transverse) folding. We study a multiphase rift basin with km‐scale fault displacements using a large high‐quality 3D seismic data set from the Fingerdjupet Subbasin in the southwestern Barents Sea. We link growth package architecture to timing and mode of fault reactivation. Dip linkage of deep and shallow fault segments resulted in ramp‐flat‐ramp fault geometry, above which fault‐parallel fault‐bend folds developed. The folds limited the accommodation near their causal faults, leading to deposition within a fault‐bend synclinal growth basin further into the hangingwall. Continued fold growth led to truncation of strata near the crest of the fault‐bend anticline before shortcut faulting bypassed the ramp‐flat‐ramp structure and ended folding. Accommodation along the fault‐parallel axis is controlled by the transverse folds, the location and size of which depends on the degree of linkage in the fault network and the accumulated displacement on causal faults. We construct transverse fold trajectories by tracing transverse fold hinges through space and time to highlight the positions of maximum and minimum accommodation and potential sediment entry points to hangingwall growth basins. The length and shape of the constructed trajectories relate to the displacement on their parent faults, duration of fault activity, timing of transverse basin infill, fault linkage and strain localization. We emphasize that the considerable wavelength, amplitudes and potential periclinal geometry of extensional folds make them viable targets for CO₂ storage or hydrocarbon exploration in rift basins.     

前陆冲断带复杂构造解析与建模——以准噶尔盆地南缘第一排背斜带为例

构造解析应从构造的变形机制、变形过程、变形量和变形时间四个方面入手,合理的构造解释方案是构造解析的基础,论文将等倾角区划分和轴面分析等几何学方法应用到地震解释中,从以上4个方面对准噶尔盆地南缘第一排背斜带做了系统的构造解析。地层结构揭示第一排背斜带深部发育楔状构造,楔状构造由5个古生界—中生界组成的断层转折褶皱叠加而成,是潜在的勘探目标群。在构造楔沿侏罗系西山窑组煤层向北扩展过程中,台阶状逆断层的大部分位移量沿构造楔顶部的反冲断层向南消减,另一部分位移量则沿西山窑组煤层向北传递至第二排背斜带,在总位移量保持稳定的前提下,第一排背斜带和第二排背斜带在走向上的此消彼长,反映位移量在南、北两个方向上的转换。     

三维并行合成震源记录叠前深度偏移

提出了一种基于波动理论的三维合成震源记录叠前深度偏移方法,该方法不含任何物理假设,利用波动方程算子的3个性质,合成炮震源及炮震源记录,将面炮记录合成与相位编码合成两种方法在理论上和计算上合二为一,成为一个统一的合成理论. 通过双重叠加把三维叠前五维数据转换为三维数据,既保证了成像质量同炮记录偏移成像一样精确,又显著地提高了计算效率,且适于复杂地质构造成像. 针对不同情况,给出了几种不同的合成算子,使方法在实际应用中有较大的灵活性和选择性. 基于MPI并行算法的实现,进一步提高了计算效率. SEG＼EAGE盐丘C3_NA数据模型上的试算结果和新疆三维起伏地表实际地震资料的处理结果进一步说明了该方法的有效性和实用性.