Degradation in Cemented Marine Clay Subjected to Cyclic Compressive Loading

The influence of cyclic loading on the strength and deformation behavior of cemented marine clay has been studied. This marine clay is of recent Pleistocene origin and deposited in a shallow water marine environment. Open pits were dug in sheeted enclosures and from these pits, undisturbed samples were taken for strength testing. A series of standard triaxial shear tests and stress controlled one-way cyclic load tests were conducted at consolidation stress ranges below and above the preconsolidation pressure. For the stress levels below the preconsolidation pressure, the cyclic loading has brought about the collapse of the cementation bond through an increase in strains, and at higher pressure ranges, the soil behaves like typical soft clay. This experiment studied the rate of development of strain and pore water pressure and shows that rate is a function of number of cycles, applied stress, and stress history. In addition, soil degradation during cyclic loading is studied in terms of Degradation Index. Attempt has been made to predict stain, pore water pressure, and degradation index through an empirical model.     

Cyclic inelastic behavior and analytical modelling of pile–leg interaction in jacket type offshore platforms

Structures in locations susceptible to severe seismic disturbances should be designed properly in order to resist lateral forces induced by earthquake motions. Steel offshore platforms are some of those structures which are built to withstand environmental and accidental loads during oil exploitation operation. Particular attention is being paid to earthquake loads in seismic active areas because it directly influences the capacity of the offshore installations.

In this paper, a small-scaled planar platform has been modelled analytically using nonlinear finite element program, based on an experimental test, conducted simultaneously in order to assess the local and global behavior of pile–leg interaction in Jacket Type Offshore Platforms (JTOPs). A combination of nonlinear beam column elements and fatigue affected elements are used to capture the inelastic cyclic behavior of planar frame as accurately as possible. Results of analytical tests are to be compared with experiments and it is concluded that an analytical approach can be best used for modelling JTOPs with reasonable accuracy regardless of the type and scale of the structure. Moreover, a special study on joints has been carried out and the best model has been selected to simulate brittle behavior of joints resulting from heat affected zone.     

Aragonite cycles: diagenesis caught in the act

Organic biomarker and nannofossil assemblages are used in combination with sedimentary petrology to identify the role of diagenesis for the formation of a rhythmic calcareous succession. A record from the Early Pliocene of the Maldives (Ocean Drilling Program, ODP Leg 115) is presented containing precession and eccentricity cycles expressed as variable aragonite content. Additional sub‐Milankovitch cycles are caused by rhythmic precipitation of calcite cement in the lower part of the interval. Comparison with palaeo‐productivity indicators (nannofossils, chlorin, total organic carbon) suggests that cementation occurs preferentially in intervals characterized by increasing or decreasing productivity. The coupled variability in productivity and carbonate diagenesis is attributed to the effect of organic matter degradation in the sediment. The observed combination of primary and diagenetic factors hampers the interpretation of the cyclicity on Milankovitch and sub‐Milankovitch scales. Diagenetically stable proxies for palaeo‐productivity, such as nannofossil assemblage data, were used to distinguish between palaeoclimate and diagenetic influences.     

Modeling the cyclic swelling pressure of mudrock using artificial neural networks

The stochastic nature of the cyclic swelling behavior of mudrock and its dependence on a large number of interdependent parameters was modeled using Time Delay Neural Networks (TDNNs). This method has facilitated predicting cyclic swelling pressure with an acceptable level of accuracy where developing a general mathematical model is almost impossible. A number of total pressure cells between shotcrete and concrete walls of the powerhouse cavern at Masjed–Soleiman Hydroelectric Powerhouse Project, South of Iran, where mudrock outcrops, confirmed a cyclic swelling pressure on the lining since 1999. In several locations, small cracks are generated which has raised doubts about long term stability of the powerhouse structure. This necessitated a study for predicting future swelling pressure. Considering the complexity of the interdependent parameters in this problem, TDNNs proved to be a powerful tool. The results of this modeling are presented in this paper.     

Computational modeling of cyclic mobility and post-liquefaction site response

Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations.     

WZY-1型钻参仪的研究与应用

分析了目前钻参仪未能普遍推广应用的原因。介绍了WZY－1型钻参仪的总体构成、测试参数、性能特点及其分别与钻机和水泵的一体化设计。     

A critical state interpretation for the cyclic liquefaction resistance of silty sands

Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p₀<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress.     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.     

Strain accumulation in sand due to cyclic loading: drained triaxial tests

Our aim is the prediction of the accumulation of strain and/or stress under cyclic loading with many (thousands to millions) cycles and relatively small amplitudes. A high-cycle constitutive model is used for this purpose. Its formulas are based on numerous cyclic tests. This paper describes drained tests with triaxial compression and uniaxial stress cycles. The influence of the strain amplitude, the average stress, the density, the cyclic preloading history and the grain size distribution on the direction and the intensity of strain accumulation is discussed.     

叶蛇纹岩脆性-半脆性破裂研究

利用Paterson气体介质高温高压流变仪对纯叶蛇纹岩在100~400MPa围压、25~700℃温度和10-5~1.5×10-6s-1应变速率下进行了三轴压缩变形实验。实验结果表明叶蛇纹石在低压条件下表现为脆性破裂,高压或脱水条件下表现为半脆性破裂。随着温度的增加,叶蛇纹石的强度显示逐渐降低的趋势;尤其在脱水条件下,温度的增加可导致叶蛇纹石强度大幅度地降低,而且此时预热时间对强度的影响比未发生脱水时更加显著。结合前人的研究并对比发现,围压在室温下的增加导致叶蛇纹岩强度增加;但在高温下围压的增加导致试样强度整体上降低,这很可能是试样内聚力的局部损失与韧性增强引起的。围压和温度的升高,以及断层面上流体的增加很可能会增加破裂面的韧性,从而减小摩擦系数。此外,叶蛇纹石并非以往人们所认为的那样具有极低的强度,其强度要比低温蛇纹石(如利蛇纹石和纤蛇纹石)的大得多,即便在高温(大约600℃)下差应力大于约600MPa和中-低温(≤400℃)下差应力大于约1000MPa时仍没有表现出明显屈服的迹象。在脱水条件下,蛇纹岩并没有发生脱水致脆,相反脱水使得试样的断裂行为变得更加温和些。因此,俯冲带蛇纹岩脱水更可能诱发其周围更加脆性的岩石发生地震而不是脱水的蛇纹岩本身发生地震。