The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.     

Large-scale rheomorphic shear deformation in Miocene peralkaline ignimbrite E,Gran Canaria

the single ignimbrite cooling unit E (average thickness, 28 m; volume, ca. 30 km₃) forms the uppermost member of the Miocene Upper Mogán Formation on Gran Canaria. It is strongly chemically zoned from basal, first-erupted comendite (peralkaline rhyolite) to late-erupted trachyte, and, apart from an upper trachytic zone, it is densely welded. E was emplaced onto a surface inclined ca. 2–5° from the source caldera. Detailed mapping of key sections, up to 300 m long, exposed in barranco walls, ca. 10 km from the caldera margin, reveals structures that are interpreted to have been produced by rheomorphic deformation of the ignimbrite along shear zones. The shear zones formed within the lower-viscosity comenditic tuff. Extensional structures include mega-boudinage and decapitated sequences and compression resulted in sequence repitition by overthrusting. Mechanisms traditionally thought to be important during rheomorphic deformation of welded tuffs (compaction, lateral creep, folding, vertical density-driven diapirism) cannot account for these features, which reflect lateral (post-compactional) rheomorphic movement locally in excess of 800 m. We suggest the following sequence of events: emplacement of the several flow units; compaction, with little lateral movement; rheomorphic deformation. During and after compaction, layers of secondary porosity developed within the comenditic tuff, possibly where upward escape of gas was prevented by overlying, relatively impermeable layers of densely compacted ignimbrite. These structurally weak layers of high porosity subsequently acted as shear zones.     

Deterioration of the volcanic kerb and pavement stones in a humid environment in the city centre of Izmir, Turkey

?zmir is the third largest city in Turkey and has being the centre of art, culture, tourism and trade activities throughout the 5,000 years of its history. Natural stones brought from different parts of the world have been widely used for construction of the prestigious buildings, monuments and roads etc., in the past in the city. Renovation of the street pavements and public gathering areas in the city centre has been undertaken by the Metropolitan Municipality in 2000 and continued through the year of 2001. These renovation activities have mainly been carried out in the streets running parallel to the sea shore. Volcanic rocks brought from the Central Anatolia Ankara-Gölba?? (andesites) and Kayseri-?ncesu (tuffs) have been used in the renovation works. These rocks have shown extensive deteriorations within 4 years of their usage between 2001 and 2005 under the influence of different environmental factors. In this study, the deteriorations developed in the recently placed volcanic rocks used as kerb and pavement stones in the city centre of ?zmir in the light of their mineralogical, chemical, physical and mechanical properties, used locations and the environmental factors are presented.     

Middle Campanian–lowermost Maastrichtian nannofossil and foraminiferal biostratigraphy of the northwestern Australian margin

The middle–late Campanian was marked by an increase in the bioprovinciality of calcareous microfossil assemblages into distinct Tethyan, Transitional, and Austral Provinces that persisted to the end of the Maastrichtian. The northwestern Australian margin belonged to the Transitional Province and the absence of key Tethyan marker species such as Radotruncana calcarata and Gansserina gansseri has led petroleum companies operating in the area to use the locally developed KCCM integrated calcareous microfossil zonation scheme. The KCCM zonation is a composite scheme comprising calcareous nannofossil (KCN), planktonic foraminiferal (KPF) and benthonic foraminiferal (KBF) zones. This paper presents the definitions and revisions of Zones KCCM8–19, from the highest occurrence (HO) of Aspidolithus parcus constrictus to the lowest occurrence (LO) of Ceratolithoides aculeus, and builds on our previous early–late Maastrichtian study. The presence of a middle–upper Campanian disconformity is confirmed by microfossil evidence from the Vulcan Sub-basin, Exmouth and Wombat plateaus, and the Southern Carnarvon Platform. In the Vulcan Sub-basin and on the Exmouth Plateau (ODP Hole 762C) the hiatus extends from slightly above the LO of common Rugoglobigerina rugosa to above the LO of Quadrum gothicum. On the Wombat Plateau (ODP Hole 761B) it spans from above the LO of Heterohelix semicostata to above the LO of Quadrum gothicum; and in the Southern Carnarvon Platform the disconformity has its longest duration from above the HO of Heterohelix semicostata to above the LO of Quadrum sissinghii. A significant revision of the events which define Zones KCCM18 and 19 was necessary owing to the observation that the LO of Ceratolithoides aculeus occurs below the HOs of Archaeoglobigerina cretacea and Stensioeina granulata incondita and the LO of common Rugoglobigerina rugosa. In the original zonation these events were considered to be coincident.     

Recognition features of felsic pyroclastics of Serra do Tombo formation,Minas Gerais,Brazil

In this contribution we report a study of poorly exposed, rhyodacitic welded-ignimbrite deposit from Minas Gerais. A petrographic study of textures indicate high temperature of emplacement. Key features include eutaxitic texture, flattened and agglutinated lapilli and glass menisci. Most of the feldspar minerals and glass are extensively altered to clay minerals, which pseudomorph the original volcanic textures. Glass menisci and spherules suggest a possible process of liquid immiscibility. Immobile trace element distribution indicates a possible link with other post-Palaeozoic felsic volcanic rocks in Brazil, a magmatism interpreted as due to basaltic underplating and partial melting of a hydrous continental crust. A peculiar feature is a high Light REE/Heavy REE ratio. Depletion in heavy rare earth elements is possibly due to a residual HREE-bearing phase in the source. The geologic context of these rocks suggests a Lower Cretaceous age and a tectonic relationship with a continental rifting event.     

Siliceous microfossils of the Upper Cretaceous Mishash Formation,Central Negev,Israel

New finds of siliceous microfossils, mainly diatoms, are reported from hard limestone levels in the Campanian cherty Mishash Formation, Negev, Israel. Twenty taxa were recognized, of which Melosira campaniensis and Trinacria negeviensis are new species. Representatives of Ebridians are reported for the first time from Cretaceous sediments. Calcareous nannofossils are usually few and poorly preserved. The diversity of the micro- and nannofossil assemblages vary through the succession and points to fluctuations in the palaeoenvironmental conditions from restricted to more normal marine. The moderate preservation of the opaline microfossils within the limestones is probably the result of early diagenetic lithification.     

Particle fabric in a small, type-2 ignimbrite flow unit (Laacher See, Germany) and implications for emplacement dynamics

 Ignimbrites of the 13-ka Upper Laacher See Tephra were deposited from small, highly concentrated, moderately fluidized pyroclastic flows. Their unconsolidated nature, and the prominence of accidental Devonian slate fragments, make these ignimbrites ideal for clast fabric studies. The upper flow unit of ignimbrite M14 has characteristics typical of a type-2 ignimbrite. Layer 2a and the lower part of layer 2b of the flow unit have strong, upstream-inclined a[p] fabrics (a[p] means long particle axes parallel to flow direction). Only clasts with a/b axial ratios of 2.5 or greater preserve good a[p] fabrics, whereas the a–b planes of flat fragments dip upstream irrespective of axial ratio. The a-axis fabric becomes weaker, flatter, and more girdle-like in the upper half of layer 2b. At one locality the a-axis fabric appears to rotate 40° up through the flow unit, suggesting either shear decoupling of different levels in the moving flow or unsteadiness effects in a flow depositing progressively at its base. The existence of similarly strong a[p] fabrics in layer 2a and the lower half of layer 2b appears inconsistent with the common interpretation that ignimbrite flow units are emplaced as a plug of essentially non-shearing material (layer 2b) on a thin shear layer (layer 2a), and that the entire flow freezes en masse to form the deposit. The data suggest that, if the flow froze en masse, it was shearing pervasively through at least half its thickness. Another possibility is that the flow unit aggraded progressively from the base up, and that the fabrics record the integrated history of shear directions and intensities immediately above the bed throughout the duration of deposition. Received: 13 February 1997 / Accepted: 4 April 1998     

Relative sea-level, tectono-eustasy, geoidal-eustasy and geodynamics during the Cretaceous

A priori, the recorded relative sea-level changes during the Cretaceous must be the combined effect of tectono-eustasy, geoidal-eustasy and various crustal level changes. To this we must add the human factor of differences and errors in interpretations.A posteriori, it is claimed that geoidal-eustasy dominated during the Hauterivian, Barremian, Turonian, Santonian and Maastrichtian, that tectono-eustasy dominated during the Albian, Cenomanian, Campanian and at the Maastrichtian/Danian boundary, and that local influences of sea-floor spreading are identified from the Albian/Cenomanian boundary onwards. To this we must add the local differential crustal movements modulating the global and regional ocean level changes. Geoidal-eustasy is mainly expressed as a latitudinal differentiation of the sea-level with out-of-phase changes between the hemispheres or the both high latitude regions. Furthermore, sedimentological records seem to record short-period geoidal-eustatic cycles.     

Palaeogeographical implications of CretaceousBenthic Foraminifera recovered by the Deep Sea Drilling project in the Western South Atlantic ocean

Albian/Cenomanian benthic foraminiferal faunas recovered by the DSDP in the western South Atlantic Ocean (Leg 36) are described and analyzed from the palaeogeographic and palaeo-environmental points of view. In doing this the author compares Leg 36 assemblages in the western South Atlantic Ocean with coeval benthic foraminiferal faunas recovered in the eastern South Atlantic Ocean (Leg 40) and in the eastern Indian Ocean (Legs 26 and 27). The specific composition of these assemblages, except for Leg 27, is virtually the same. Consequently, they are considered to indicate the same depositional water depth at all relevant sites studied, whether located in the Angola Basin, the northern flank of the Walvis Ridge, the eastern margin of the Falkland Plateau or on the Naturaliste Plateau. All the assemblages indicate shallow environments around 100 m and not exceeding 300–400 m in the deepest parts, corresponding to the inner shelf and the inner part of the outer shelf. By contrast the foraminiferal associations of Leg 27 (especially Site 259) indicate a greater depth, of the order of 200–600 m (but not exceeding 1000 m) corresponding to upper slope of Sliter & Baker (1972) and Sliter (1972). These bathymetrical conclusions are in remarkable accord with those of Sliter (1976), based on planktic Foramini fera of Leg 36.Late Cretaceous (Campanian-Maastrichtian) material with benthic Foraminifera was limited to two positive samples; however, these faunas indicate much the same palaeo-environment as do the planktic ones analyzed by Sliter (1976).     

Phase Equilibria Constraints on the Chemical and Physical Evolution of the Campanian Ignimbrite

The Campanian Ignimbrite is a > 200 km³ trachyte–phonolitepyroclastic deposit that erupted at 39·3 ± 0·1ka within the Campi Flegrei west of Naples, Italy. Here we testthe hypothesis that Campanian Ignimbrite magma was derived byisobaric crystal fractionation of a parental basaltic trachyandesiticmelt that reacted and came into local equilibrium with smallamounts (5–10 wt%) of crustal rock (skarns and foid-syenites)during crystallization. Comparison of observed crystal and magmacompositions with results of phase equilibria assimilation–fractionationsimulations (MELTS) is generally very good. Oxygen fugacitywas approximately buffered along QFM + 1 (where QFM is the quartz–fayalite–magnetitebuffer) during isobaric fractionation at 0·15 GPa ( 6km depth). The parental melt, reconstructed from melt inclusionand host clinopyroxene compositions, is found to be basaltictrachyandesite liquid (51·1 wt% SiO₂, 9·3 wt%MgO, 3 wt% H₂O). A significant feature of phase equilibria simulationsis the existence of a pseudo-invariant temperature, 883 °C,at which the fraction of melt remaining in the system decreasesabruptly from 0·5 to < 0·1. Crystallizationat the pseudo-invariant point leads to abrupt changes in thecomposition, properties (density, dissolved water content),and physical state (viscosity, volume fraction fluid) of meltand magma. A dramatic decrease in melt viscosity (from 1700Pa s to 200 Pa s), coupled with a change in the volume fractionof water in magma (from 0·1 to 0·8) and a dramaticdecrease in melt and magma density acted as a destabilizingeruption trigger. Thermal models suggest a timescale of 200kyr from the beginning of fractionation until eruption, leadingto an apparent rate of evolved magma generation of about 10^–3km³/year. In situ crystallization and crystal settling in density-stratifiedregions, as well as in convectively mixed, less evolved subjacentmagma, operate rapidly enough to match this apparent volumetricrate of evolved magma production. KEY WORDS: assimilation; Campanian Ignimbrite; fractional crystallization; magma dynamics; phase equilibria