A critical state model for sands dependent on stress and density

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

Stratigraphy and sedimentation rates of Upper Cretaceous deep-water systems of the Rhenodanubian Group (Eastern Alps, Germany)

In the Bavarian Alps (Germany), west of the Isar River, the abyssal deposits of the Lower Barremian to Upper Campanian Rhenodanubian Group consist of siliciclastic and calcareous turbidites alternating with hemipelagic non-calcareous mudstones. The up to 1500-m-thick succession, deposited in the Penninic Basin to the south of the European Plate, is characterized by a low mean sedimentation rate (c. 25 mm kyr⁻¹) over 60 million years. Palaeocurrents and turbidite facies distribution patterns suggest that sedimentation occurred on a weakly inclined abyssal plain. The highest sedimentation rates (up to 240 mm kyr⁻¹) were associated with the calcareous mud turbidites of the newly defined Röthenbach Subgroup, which includes the Piesenkopf, Kalkgraben and Hällritz formations (Middle Coniacian to Middle Campanian). These calcareous turbidites prograded from the west, and interfinger towards the east with red hemipelagic claystone. A high sea level presumably favoured pelagic carbonate production and accumulation on the shelves and on internal platforms in the western part of the basin, whereas siliciclastic shelves with steep slope angles have bordered the eastern part of the basin, where a dearth of turbidite sedimentation and increased Cretaceous oceanic red beds deposition occurred. In contrast to the eustatically-induced Middle Coniacian to Lower Campanian Cretaceous oceanic red beds (calcareous nannoplankton zones CC14 to CC18), red hemipelagites of Early Cenomanian age (upper part of calcareous nannoplankton zone CC9) and early Late Campanian age (upper part of zone CC21 and zone CC22) are interpreted as the result of regional tectonic activity.     

Environmental contamination of Zn,Cd, Ni,Cu, and Pb from industrial areas in Hamadan Province,western Iran

Eleven surface soil samples from calcareous soils of industrial areas in Hamadan Province, western Iran were analyzed for total concentrations of Zn, Cd, Ni, Cu and Pb and were sequentially extracted into six fractions to determine the bioavailability of various heavy metal forms. Total Zn, Cd, Ni, Cu and Pb concentrations of the contaminated soils were 658 (57–5,803), 125.8 (1.18–1,361), 45.6 (30.7–64.4), 29.7 (11.7–83.5) and 2,419 (66–24,850) mg kg⁻¹, respectively. The soils were polluted with Zn, Pb, and Cu to some extent and heavily polluted with Cd. Nickel values were not above regulatory limits. Copper existed in soil mainly in residual (RES) and organic (OM) fractions (about 42 and 33%, respectively), whereas Zn occurred essentially as RES fraction (about 69%). The considerable presence of Cd (30.8%) and Pb (39%) in the CARB fraction suggests these elements have high potential biavailability and leachability in soils from contaminated soils. The mobile and bioavailable (EXCH and CARB) fractions of Zn, Cd, Ni, Cu, and Pb in contaminated soils averaged (7.3, 40.4, 16, 12.9 and 40.8%), respectively, which suggests that the mobility and bioavailability of the five metals probably decline in the following order: Cd = Pb > Ni > Cu > Zn.     

渤海新近系浅水三角洲沉积体系与大型油气田勘探

新近纪渤海具有构造稳定、沉降缓慢、湖泊水域范围大、内部无分割、地形平缓、坡度小等特点,广泛发育浅水三角洲,从而形成渤海海域新近系良好的储盖组合和优越的油气成藏条件。浅水三角洲砂岩储层由于受河流作用的控制,砂体具有明显的方向性,存在明显的分叉现象,与曲流河相比,砂体连通性较好,砂体等厚图呈典型的朵叶状。湖相厚层泥岩普遍发育,与浅水三角洲砂体组成多套垂向优质储盖组合。浅水三角洲发育于渤海新近纪至今处于生烃的峰期主力富烃凹陷的有利区带,新构造运动造成新近纪以来凹陷主力源岩生烃峰期与新构造运动的同步耦合,为渤海大型浅水三角洲成因的优质储层油气成藏创造了优越条件,可以形成大型油气田。因此,重视并充分挖掘渤海浅水三角洲储层类型油气藏的勘探潜力将是追求浅层优质油藏、进一步增储上产的方向所在。     

Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs

Abstract

Construction of the reefs in the South China Sea is a significant foundation to the secure stability and economic development of China. The construction of an airport runway is necessary for this realization. The calcareous sand is the main primary material in the runway construction. A certain type of calcareous sand near a certain reef of the South China Sea was studied in this paper. To investigate this specific calcareous sand, quartz sand was used as a reference for comparison. Microscopic 3-D imaging, compression and triaxial tests were conducted to test the micro, squeezing and shear properties. The effect mechanism of gradation on the calcareous sand’s compressibility and shear characteristics are discussed from a mesoscopic viewpoint using 3-D morphology. Calcareous sand particles are multiangular and flatter in comparison with quartz sand. The larger the particle sizes are, the more different the two sands’ morphologies are. The compressibility of calcareous sand is greater, and the effect of the coarse fraction (5–1?mm) content in the gradation plays the most significant role in this feature. When the coarse particles’ content is less than 25% and the mass ratio of the middle and fine particles (M) is constant, there is the worst coarse fraction content causing the calcareous sand to be most likely compressed. The worst coarse fraction content decreases with the increase in M, and an empirical formula is proposed. When the gradation, relative density and confining pressure are the same, the peak shear stress and strain of calcareous sand are all at a high level. The effect of confining pressure is manifested in calcareous sand. The shear strength and dilation of calcareous sand are also most affected by the medium coarse fraction (5–0.25?mm) content.     

波浪底摩擦力对重砂富集的影响——以鲁南近岸区为例

根据浅水波浪的底摩擦效应，对鲁南灵山湾和臼－岚山镇近岸区进行了波浪的海底摩擦力计算。波浪的海底摩擦力等值图与已知滨海锆石砂矿资料对比表明，底摩擦力大于０．１８Ｎ／ｍ＾２的动力分选区有利于重矿物砂富集。据此，进一步预测了鲁南近岸带的砂矿富集区。     

Rock magnetic record of Cenozoic lake sediments from the Linxia basin and aridification of the Asian inland

High resolution research of rock magnetic records and quartz sands from the Maogou Section in the Linxia basin reveals that after a relatively stable environment between 13.07 Ma and 8.6 Ma, the basin was gradually influxed by eolian dusts at about 8.6 Ma, with two rapid increases at about 6.4 Ma and 5.3 Ma, respectively. The study suggests that drying of northwest China began at 8.6 Ma and strengthened rapidly at about 6.4 Ma and 5.3 Ma. __________ Translated from Marine geology & Quaternary geology, 2007, 27(4): 103–110 [译自: 海洋地质与第四纪地质]     

Regional record of a global oceanic anoxic event: OAE1a on the Apulia Platform margin, Gargano Promontory, southern Italy

The Gargano Promontory of southern Italy, located on the eastern margin of the Apulia Platform, represents a peculiar Tethyan area where the transition between carbonate platform and adjacent basins is exposed on land. The Aptian stratigraphic record, represented in shallow-water, slope and deep-water deposits, provides a good opportunity to investigate the regional response to the worldwide documented climatic, biotic and palaeoceanographic changes related to Oceanic Anoxic Event 1a (OAE1a). A synthesis of data previously published (Ischitella and Coppitella sections), together with original data (Val Carbonara and Coppa della Guardia sections), from four stratigraphic sections from different depositional settings (proximal to distal) is provided, using an integrated, high-resolution micropalaeontological (planktonic foraminifera and calcareous nannofossils) and, for one section, geochemical (stable carbon and oxygen isotopes) approach. Organic matter preservation is confined to the more distal areas and consists of two thin intervals of black shales in the Aptian portion of the Marne a Fucoidi Formation. Biostratigraphic data assign the older black shale (5 cm thick) to the Selli Level equivalent (OAE1a, Lower Aptian); this carbon-rich interval is immediately followed by another black shale (7–10 cm thick) of early Late Aptian age.OAE1a is generally interpreted as a high-productivity event during a warming interval, followed by a cooling trend. In the Gargano Promontory, although the oxygen isotope curve indicates the above-mentioned climatic evolution, the micropalaeontological data do not support high fertility of the surface water, whereas micropalaeontological and geochemical data for the younger black shale do record high productivity (radiolarian increase in overall abundance, low nannofossil and foraminiferal species richness, increase in abudance of nannofossil fertility indices) associated with a cooling trend. The carbon and oxygen isotope record is in line with evidence from the curves documented elsewhere, whereas, among the biotic events, only the “nannoconid crisis” preceding OAE1a is revealed to be globally correlable.Environmental models for the two episodes of organic matter preservation are proposed, taking into account both global and local controlling factors.     

Limestone–marl alternations as environmental archives and the role of early diagenesis: a critical review

Limestone–marl alternations and other micritic calcareous rhythmites have long appealed to sedimentologists, as they appeared to directly reflect high-frequency environmental change. In particular, when orbital forcing gained popularity amongst sedimentologists and paleoclimatologists in 1980s, such rhythmites seemed to offer an ideal tool for high-resolution chronostratigraphy and environmental reconstruction. However, in spite of the fact that orbital forcing has become a routine interpretation of calcareous rhythmites, and that the processes of formation of calcareous rhythmites are considered well understood, research in the past 10 years again has questioned their primary origin and their direct interpretability. Detailed petrographic, paleontological, and geochemical data from numerous successions through geological time provided the basis for testing whether or not the regular alternation of limestone beds and marl or shale interlayers represents bimodally fluctuating environmental conditions in a direct way. In particular, these data, supplemented by box model simulations, imply that post-depositional alteration (diagenesis) has the potential to not only seriously distort primary environmental signals, but also to mimic primary signals. This questions the use of micritic calcareous rhythmites for high-resolution chronostratigraphy and for environmental interpretations where independent data of diagenetically inert parameters are not available. Diagenetic changes appear to have a yet widely underestimated influence on the appearance of limestone–marl alternations and other calcareous rhythmites. The aim of the present review is to summarize new approaches and give an overview of our research results in this field of the past decade. This review also aims at pointing to still enigmatic aspects that need to be addressed before the interpretation of micritic calcareous rhythmites can be considered a reliable tool for high-resolution chronostratigraphy and paleoenvironmental interpretation. “This difference [between shale and limestone] does not find definite expression in the chemical composition but appeals to the eye.” Gilbert (1895)     

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.