Brine-pool deposition for the Zn–Pb–Cu massive sulphide deposits of the Bathurst mining camp, New Brunswick, Canada. II. Ocean anoxia during mineralisation

Current models of massive sulphide ore genesis in the Bathurst mining camp, New Brunswick, involve settling of sulphide particles from a stagnating, low-salinity hydrothermal plume spreading laterally in an anoxic ocean layer with minimal sulphate content. There is fragmentary evidence of ocean anoxia in the form of local fine lamination in the shales that host some of the deposits but the total organic carbon, S, Fe, U/Th, Ni/Co, V/Ni and V/Cr relationships indicate deposition under oxic or dysoxic conditions. Vanadium and Mn values range from oxic to anoxic and sulphate-reducing to non-sulphate reducing but Mn may be anomalously low due to derivation by erosion of acidic volcanic rocks. The somewhat equivocal physical and chemical data, combined with the likely disturbing effects of penecontemporaneous volcanism, considerably weaken the case for an anoxic bottom layer in a static ocean. The presence of barite with ambient seawater ³⁴S values in Brunswick no. 12 ore, and the abundance of sulphate in modern euxinic basin waters, make a sulphate-free layer unlikely, even if anoxic. Sulphate-bearing, low-salinity fluids mixing with seawater would lead to growth of barite-bearing chimneys and baritic rubble mounds, which are not observed. A model involving brine-pool deposition better explains the major features of the Bathurst ores.     

Fission track data from the Bathurst Batholith: Evidence for rapid mid‐Cretaceous uplift and erosion within the eastern highlands of Australia

Apatite fission track thermochronology reveals that uplift and erosion occurred during the mid‐Cretaceous within the Bathurst Batholith region of the eastern highlands, New South Wales. Apatite fission track ages from samples from the eastern flank of the highlands range between ca 73 and 139 Ma. The mean lengths of confined fission tracks for these samples are > 13 μm with standard deviations of the track length distributions between 1 and 2 μm. These data suggest that rocks exposed along the eastern flank of the highlands were nearly reset as the result of being subjected to palaeotemperatures in the range of approximately 100–110°C, prior to being cooled relatively quickly through to temperatures < 50°C in the mid‐Cretaceous at ca 90 Ma. In contrast, samples from the western flank of the highlands yield apparent apatite ages as old as 235 Ma and mean track lengths < 12.5 μm, with standard deviations between 1.8 and 3 μm. These old apatite ages and relatively short track lengths suggest that the rocks were exposed to maximum palaeotemperatures between approximately 80° and 100°C prior to the regional cooling episode. This cooling is interpreted to be the result of kilometre‐scale uplift and erosion of the eastern highlands in the mid‐Cretaceous, and the similarity in timing of uplift and erosion within the highlands and initial extension along the eastern Australian passive margin prior to breakup (ca 95 Ma) strongly suggests these two occurrences are related.     

Brine pool deposition for the Zn–Pb–Cu massive sulphide deposits of the Bathurst mining camp, New Brunswick, Canada. I. Comparisons with the Iberian pyrite belt

The Ordovician Zn–Pb–Cu massive sulphide ore deposits of the Bathurst mining camp share many features with those of the Devonian/Carboniferous Iberian pyrite belt, particularly the tendency to large size (tonnage and metal content); shape, as far as can be determined after allowing for deformation; metal content, particularly Fe/Cu, Pb/Zn and Sn; mineral assemblages (pyrite + arsenopyrite ± pyrrhotite and lack or rarity of sulphates); sulphide textures (particularly framboidal pyrite); lack of chimney structures and rubble mounds; irregular metal or mineral zoning; and the low degree of zone refining compared to Hokuroku ores. The major differences between the provinces are the lack of vent complexes and the presence of Sn–Cu ores in the Iberian pyrite belt. There are also similarities in the geological setting of the two camps: both lie within continental terranes undergoing arc-continent and continent–continent collision, and in each case massive sulphide mineralisation followed ophiolite obduction; the ore deposits are associated with bimodal volcanic rocks derived from MORB and continental crust and marine shales; and mineralisation was locally accompanied or followed by deposition of iron formations.Fluid inclusion data from veins in stockworks from at least six of the Iberian massive sulphide deposits point to sulphide deposition having taken place in basins containing mostly spent saline, ore-forming fluids (brine pools), and it is suggested that most of the major features of the Bathurst deposits can be explained by similar processes. The proposed model is largely independent of ocean sulphate and O₂ content, whereas low values of each are requisites for the current, spreading-plume model of sulphide deposition in the Bathurst camp.     

Gold in the Brunswick No. 12 volcanogenic massive sulfide deposit,Bathurst Mining Camp,Canada: Evidence from bulk ore analysis and laser ablation ICP─MS data on sulfide phases

The 329-Mt Brunswick No. 12 volcanogenic massive sulfide deposit (total resource of 163 Mt at 10.4% Zn, 4.2% Pb, 0.34% Cu, and 115 g/t Ag) is hosted within a Middle Ordovician bimodal volcanic and sedimentary sequence. Massive sulfides are for the most part syngenetic, and the bulk of the sulfide ore occurs as a Zn–Pb-rich banded sulfide facies that forms an intimate relationship with a laterally extensive Algoma-type iron formation and defines the Brunswick Horizon. Zone refining of stratiform sulfides is considered to have resulted in the development of a large replacement-style Cu-rich basal sulfide facies, which is generally confined between the banded sulfide facies and an underlying stringer sulfide zone. Complex polyphase deformation and associated lower- to upper-greenschist facies regional metamorphism is responsible for the present geometry of the deposit. Textural modification has resulted in a general increase in grain size through the development of pyrite and arsenopyrite porphyroblasts, which tend to overprint primary mineral assemblages. Despite the heterogeneous ductile deformation, primary features have locally been preserved, such as fine-grained colloform pyrite and base and precious metal zonation within the Main Zone. Base metal and trace element abundances in massive sulfides from the Brunswick No. 12 deposit indicate two distinct geochemical associations. The basal sulfide facies, characterized by a proximal high-temperature hydrothermal signature (Cu–Co–Bi–Se), contains generally low Au contents averaging 0.39 ppm (n = 34). Conversely, Au is enriched in the banded sulfide facies, averaging 1.1 ppm Au (n = 21), and is associated with an exhalative suite of elements (Zn–Pb–As–Sb–Ag–Sn). Finely laminated sulfide lenses hosted by iron formation at the north end of the Main Zone are further enriched in Au, averaging 1.7 ppm (n = 41) and ranging up to 8.2 ppm. Laser ablation inductively coupled plasma-mass spectrometry (ICP-MS) analyses of pyrite (n = 97) from the north end of the Main Zone average 2.6 ppm Au and range from the detection limit (0.015 ppm) to 21 ppm. Overall, these analyses reveal a distinct Au–Sb–As–Ag–Hg–Mn association within pyrite grains. Gold is strongly enriched in large pseudo-primary masses of pyrite that exhibit relict banding and fine-grained cores; smaller euhedral pyrite porphyroblasts, and euhedral rims of metamorphic origin surrounding the pyrite masses, contain much less Au, Sb, Ag, As, and Sn. Arsenopyrite, occurring chiefly as late porphyroblasts, contains less Au, averaging 1.0 ppm and ranging from the detection limit (0.027 ppm) to 6.9 ppm. Depth profiles for single-spot laser ablation ICP-MS analyses of pyrite and arsenopyrite display uniform values of Au and an absence of discrete microscopic inclusions of Au-bearing minerals, which is consistent with chemically bonded Au in the sulfide structure. The pervasive correlation of Au with Sn in the Zn–Pb-rich banded sulfide facies suggests similar hydrothermal behavior during the waxing stages of deposition on the seafloor. Under high temperature (>350oC) and moderate- to low-pH conditions, Au and Sn in hydrothermal fluids would be transported as chlorocomplexes. An abrupt decrease in temperature and aH₂S, accompanied by an increase in fO₂ and pH during mixing with seawater, would lead to the simultaneous destabilization of both Au and Sn chlorocomplexes. The enrichment of Au in fine-grained laminated sulfides on the periphery of the deposit, accompanied by sporadic occurrences of barite and Fe-poor sphalerite, supports lower hydrothermal fluid temperatures analogous to white smoker activity on the flanks of a large volcanogenic massive sulfide system. In lower temperature (<350oC) and mildly acidic hydrothermal fluids, Au would be transported by thiocomplexes, which exhibit multifunctional (retrograde–prograde) solubility and a capacity to mobilize Au to the outer parts of the sulfide mound. The sluggish nature of this low-temperature venting together with larger variations in ambient fO₂ could lead to a sharp enrichment of Au towards the stratigraphic hanging wall of massive sulfide deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.