Control of Aptian palaeobathymetry on turbidite distribution in the Buchan Graben,Outer Moray Firth,Central North Sea

It is widely recognised that palaeobathymetry is a key control on the distribution of turbidite deposits. Thus, the utilisation of palaeobathymetric surfaces as an input for numerical turbidity current modelling offers a potentially powerful method to predict the distribution of deep marine sands in ancient (subsurface or outcrop) successions. Such an approach has been tested on an Aptian turbidite deposit from the Buchan Graben, UK Central North Sea, where modelled sand distributions could be quality controlled against available well data.     

莺歌海盆地拉张性质的研究

莺歌海盆地是南海北部陆架盆地的重要组成部分．本文根据ＭｃＫｅｎｚｉｅ（１９７８）的均匀拉张模型,并采用Ｍｉｄｄｉｅｔｏｎ（１９８４）在地震地史分析中的做法,由地震剖面资料得到进行去压实校正所需的地层资料．经过去压实校正和回剥处理,得出了盆地典型剖面的地层埋藏史和热沉降史．然后,由热沉降史通过与ＭｃＫｅｎｚｉｅ的理论曲线的对比,求出拉张因子分布．结果表明,莺歌海盆地为符合ＭｃＫｅｎｚｉｅ模型的盆地,南海的两次扩张在莺歌海盆地形成过程中有明显的反映．     

Tectonic subsidence history and thermal evolution of the Orange Basin

The Orange Basin offshore southwest Africa appears to represent a classical example of continental rifting and break up associated with large-scale, transient volcanism. The presence of lower crustal bodies of high seismic velocities indicates that large volumes of igneous crust formed as a consequence of lithospheric extension.     

Basement tectonics and flexural subsidence along western continental margin of India

The Paleocene-recent post-rift subsidence history recorded in the Mumbai Offshore Basin off western continental margin of India is examined. Results obtained through 2-D flexural backstripping modelling of new seismic data reveal considerable thermo-tectonic subsidence over last ca. 56 Myr. Reverse postrift subsidence modelling with variable β stretching factor predicts residual topography of ca. 2000 m to the west of Shelf Margin Basin and fails to restore late Paleocene horizon and the underlying igneous basement to the sea level. This potentially implies that:(1) either the igneous basement formed during the late Cretaceous was emplaced under open marine environs; or(2) a laterally varying cumulative subsidence occurred within Mumbai Offshore Basin(MOB) during ca. 68 to ca. 56 Ma. Pre-depositional topographic variations at ca. 56 Ma across the basin could be attributed to the extensional processes such as varied lower crustal underplating along Western Continental Margin of India(WCMI). Investigations about basement tectonics after unroofing of sediments since late Paleocene from this region support a transitional and heavily stretched nature of crust with high to very high β factors. Computations of past sediment accumulation rates show that the basin sedimentation peaked during late Miocene concurrently with uplift of Himalayan-Tibetan Plateau and intensification of Indian monsoon system. Results from basin subsidence modelling presented here may have significant implications for further studies attempting to explore tectono-climatic interactions in Asia.     

雅鲁藏布中新生代深水沉积盆地形成和演化(Ⅲ)——喜马拉雅被动大陆边缘构造沉降分析

喜马拉雅特提斯中、新生代属印度板块北部被动大陆边缘。对充填这个被动大陆边缘的沉积物用“反剥法”(backstrippiog)进行研究,恢复了从被动大陆边缘到前陆盆地的抓降史。对分离出的盆地构造沉降曲线与McKenzie模式图版进行对比相关性分析,判断认为被动大陆边缘成熟期主要为热耗散沉降,前陆盆地时逆冲推覆动力为主要影响因素。     

四川盆地埋藏沉降史模拟

将地震剖面与钻井资料结合起来，根据钻井取得的地层厚度、时代、岩性、密度、孔 隙度等信息，对剖面上任意点进行回剥分析，并运用均衡原理绘出沉降曲线，从而给出沉积 史和构造史. 模拟研究四川盆地埋藏沉降史表明，四川盆地构造沉降与总沉降之差随地层地 质年龄的减少而减少，说明地层越新压实量越小. 不同时期的沉降速率有所不同，总趋势为 早期沉降速率大，随着时间的推移，沉降速率逐渐减小.     

Crustal memory and basin evolution in the Central European Basin System—new insights from a 3D structural model

The Central European Basin System (CEBS) is composed of a series of subbasins, the largest of which are (1) the Norwegian–Danish Basin (2), the North German Basin extending westward into the southern North Sea and (3) the Polish Basin. A 3D structural model of the CEBS is presented, which integrates the thickness of the crust below the Permian and five layers representing the Permian–Cenozoic sediments. Structural interpretations derived from the 3D model and from backstripping are discussed with respect to published seismic data. The analysis of structural relationships across the CEBS suggests that basin evolution was controlled to a large degree by the presence of major zones of crustal weakness. The NW–SE-striking Tornquist Zone, the Ringkøbing-Fyn High (RFH) and the Elbe Fault System (EFS) provided the borders for the large Permo–Mesozoic basins, which developed along axes parallel to these fault systems. The Tornquist Zone, as the most prominent of these zones, limited the area affected by Permian–Cenozoic subsidence to the north. Movements along the Tornquist Zone, the margins of the Ringkøbing-Fyn High and the Elbe Fault System could have influenced basin initiation. Thermal destabilization of the crust between the major NW–SE-striking fault systems, however, was a second factor controlling the initiation and subsidence in the Permo–Mesozoic basins. In the Triassic, a change of the regional stress field caused the formation of large grabens (Central Graben, Horn Graben, Glückstadt Graben) perpendicular to the Tornquist Zone, the Ringkøbing-Fyn High and the Elbe Fault System. The resulting subsidence pattern can be explained by a superposition of declining thermal subsidence and regional extension. This led to a dissection of the Ringkøbing-Fyn High, resulting in offsets of the older NW–SE elements by the younger N–S elements. In the Late Cretaceous, the NW–SE elements were reactivated during compression, the direction of which was such that it did not favour inversion of N–S elements. A distinct change in subsidence controlling factors led to a shift of the main depocentre to the central North Sea in the Cenozoic. In this last phase, N–S-striking structures in the North Sea and NW–SE-striking structures in The Netherlands are reactivated as subsidence areas which are in line with the direction of present maximum compression. The Moho topography below the CEBS varies over a wide range. Below the N–S-trending Cenozoic depocentre in the North Sea, the crust is only 20 km thick compared to about 30 km below the largest part of the CEBS. The crust is up to 40 km thick below the Ringkøbing-Fyn High and up to 45 km along the Teisseyre–Tornquist Zone. Crustal thickness gradients are present across the Tornquist Zone and across the borders of the Ringkøbing-Fyn High but not across the Elbe Fault System. The N–S-striking structural elements are generally underlain by a thinner crust than the other parts of the CEBS.The main fault systems in the Permian to Cenozoic sediment fill of the CEBS are located above zones in the deeper crust across which a change in geophysical properties as P-wave velocities or gravimetric response is observed. This indicates that these structures served as templates in the crustal memory and that the prerift configuration of the continental crust is a major controlling factor for the subsequent basin evolution.     

Basin evolution of the northern part of the Northeast German Basin — Insights from a 3D structural model

A 3D structural model for the entire southwestern Baltic Sea and the adjacent onshore areas was created with the purpose to analyse the structural framework and the sediment distribution in the area. The model was compiled with information from several geological time-isochore maps and digital depth maps from the area and consists of six post-Rotliegend successions: The Upper Permian Zechstein; Lower Triassic; Middle Triassic; Upper Triassic–Jurassic; Cretaceous and Cenozoic. This structural model was the basis for a 3D backstripping approach, considering salt flow as a consequence of spatially changing overburden load distribution, isostatic rebound and sedimentary compaction for each backstripping step in order to reconstruct the subsidence history in the region. This method allows determination of the amount of tectonic subsidence or uplifting as a consequence of the regional stress field acting on the basin and was followed by a correlation with periods of active salt movement. In general, the successions above the highly deformed Zechstein evaporites reveal a thickening trend towards the Glückstadt Graben, which also experienced the highest amount of tectonic subsidence during the Mesozoic and Cenozoic. Two periods of accelerating salt movement in the area has been correlated with the E–W directed extension during the Late Triassic–Early Jurassic and later by the Late Cretaceous–Early Cenozoic inversion, suggesting that the regional stress field plays a key role in halokinesis. The final part of this work dealt with a neotectonic forward modelling in an attempt to predict the future topography when the system is in a tectonic equilibrium. The result reveals that many of the salt structures in the region are still active and that future coastline will run with a WNW–ESE trend, arguing that the compressional stresses related to the Alpine collision are the prime factor for the present-day landscape evolution.     

Salt redistribution during extension and inversion inferred from 3D backstripping

A 3D backstripping approach considering salt flow as a consequence of spatially changing overburden load distribution, isostatic rebound and sedimentary compaction for each backstripping step is used to reconstruct the subsidence history in the Northeast German Basin. The method allows to determine basin subsidence and the salt-related deformation during Late Cretaceous–Early Cenozoic inversion and during Late Triassic–Jurassic extension. In the Northeast German Basin, the deformation is thin-skinned in the basinal part, but thick-skinned at the basin margins. The salt cover is deformed due to Late Triassic–Jurassic extension and Late Cretaceous–Early Cenozoic inversion whereas the salt basement remained largely stable in the basin area. In contrast, the basin margins suffered strong deformation especially during Late Cretaceous–Early Cenozoic inversion. As a main question, we address the role of salt during the thin-skinned extension and inversion of the basin. In our modelling approach, we assume that the salt behaves like a viscous fluid on the geological time-scale, that salt and overburden are in hydrostatical near-equilibrium at all times, and that the volume of salt is constant. Because the basement of the salt is not deformed due to decoupling in the basin area, we consider the base of the salt as a reference surface, where the load pressure must be equilibrated. Our results indicate that major salt movements took place during Late Triassic to Jurassic E–W directed extension and during Late Cretaceous–Early Cenozoic NNE–SSW directed compression. Moreover, the study outcome suggests that horizontal strain propagation in the salt cover could have triggered passive salt movements which balanced the cover deformation by viscous flow. In the Late Triassic, strain transfer from the large graben systems in West Central Europe to the east could have caused the subsidence of the Rheinsberg Trough above the salt layer. In this context, the effective regional stress did not exceed the yield strength of the basement below the Rheinsberg Trough, but was high enough to provoke deformation of the viscous salt layer and its cover. During the Late Cretaceous–Early Cenozoic phase of inversion, horizontal strain propagation from the southern basin margin into the basin can explain the intensive thin-skinned compressive deformation of the salt cover in the basin. The thick-skinned compressive deformation along the southern basin margin may have propagated into the salt cover of the basin where the resulting folding again was balanced by viscous salt flow into the anticlines of folds. The huge vertical offset of the pre-Zechstein basement along the southern basin margin and the amount of shortening in the folded salt cover of the basin indicate that the tectonic forces responsible for this inversion event have been of a considerable magnitude.     

Salt movements in the Northeast German Basin and its relation to major post-Permian tectonic phases—results from 3D structural modelling, backstripping and reflection seismic data

The NW–SE-striking Northeast German Basin (NEGB) forms part of the Southern Permian Basin and contains up to 8 km of Permian to Cenozoic deposits. During its polyphase evolution, mobilization of the Zechstein salt layer resulted in a complex structural configuration with thin-skinned deformation in the basin and thick-skinned deformation at the basin margins. We investigated the role of salt as a decoupling horizon between its substratum and its cover during the Mesozoic deformation by integration of 3D structural modelling, backstripping and seismic interpretation. Our results suggest that periods of Mesozoic salt movement correlate temporally with changes of the regional stress field structures. Post-depositional salt mobilisation was weakest in the area of highest initial salt thickness and thickest overburden. This also indicates that regional tectonics is responsible for the initiation of salt movements rather than stratigraphic density inversion.Salt movement mainly took place in post-Muschelkalk times. The onset of salt diapirism with the formation of N–S-oriented rim synclines in Late Triassic was synchronous with the development of the NNE–SSW-striking Rheinsberg Trough due to regional E–W extension. In the Middle and Late Jurassic, uplift affected the northern part of the basin and may have induced south-directed gravity gliding in the salt layer. In the southern part, deposition continued in the Early Cretaceous. However, rotation of salt rim synclines axes to NW–SE as well as accelerated rim syncline subsidence near the NW–SE-striking Gardelegen Fault at the southern basin margin indicates a change from E–W extension to a tectonic regime favoring the activation of NW–SE-oriented structural elements. During the Late Cretaceous–Earliest Cenozoic, diapirism was associated with regional N–S compression and progressed further north and west. The Mesozoic interval was folded with the formation of WNW-trending salt-cored anticlines parallel to inversion structures and to differentially uplifted blocks. Late Cretaceous–Early Cenozoic compression caused partial inversion of older rim synclines and reverse reactivation of some Late Triassic to Jurassic normal faults in the salt cover. Subsequent uplift and erosion affected the pre-Cenozoic layers in the entire basin. In the Cenozoic, a last phase of salt tectonic deformation was associated with regional subsidence of the basin. Diapirism of the maturest pre-Cenozoic salt structures continued with some Cenozoic rim synclines overstepping older structures. The difference between the structural wavelength of the tighter folded Mesozoic interval and the wider Cenozoic structures indicates different tectonic regimes in Late Cretaceous and Cenozoic.We suggest that horizontal strain propagation in the brittle salt cover was accommodated by viscous flow in the decoupling salt layer and thus salt motion passively balanced Late Triassic extension as well as parts of Late Cretaceous–Early Tertiary compression.