Relict mountain slope deposits of northern Portugal: facies,sedimentogenesis and environmental implications

This paper deals with the formation processes and the palaeoenvironmental significance of relict slope deposits located on the uppermost part of the north Portugal mountains. For this purpose, seven key sites representative of the different lithofacies have been selected and analysed in detail. The data show that three main dynamic processes are responsible for the emplacement of regional fossil slope deposits: runoff, debris flows and dry grain flows. The ubiquity of these processes and the lack of frost‐related features or landforms do not support the existence of severe Pleistocene climates in this part of the lberian Peninsula as postulated by previous work. Pedological data gathered at one of the study sites show that a subalpine environment was probably present at 700–800 m altitude between 29 and 14 kyr. Using data from the Pyrenees Mountains, a 6.5 to 12°C depression in mean annual temperature has been tentatively postulated for this Pleniglacial period. Copyright © 2003 John Wiley & Sons, Ltd.     

The grain-size characteristics of Quaternary deposits at Xingshan near Siping in Jilin province, China

This research paper analyses the grain-size characteristics of the Quaternary deposits at Xingshan near Siping, Jilin province in China by employing graphic measures to study the grain size distribution and its mode of transport and deposition. The Quaternary deposits at Xingshan lie unconformable on Cretaceous rocks made of siltstone, mudstone and sandstone. The average grain size is between 8.06 to 8.55Φ (0.002 6 ～0.003 7 mm). The Quaternary deposits at Xingshan mainly compose of very fine silt to clay. The compositions of the grade are clay 63% and silt 37%. The clay size components are weathered debris transported and deposited by flowing water from the SE highlands or hills to the low lying NW Xingshan plains whereas the silty components accumulated by aoelian process. The Quaternary deposits at Xingshan accumulated in the middle and late Pleistocene interglacial periods from (459.12～39.03) ka to (88.92～7.56) ka. The standard deviation ranged from 0.96 to 1.36Φ, indicating that the sediments are moderately to poorly sorted, Coefficient of skewness ranged from 0.16～0.31 with an average skewness of 0.218, (Positively skewed towards fine). Kurtosis values (0.84～1.05) from the grain size distribution and visual inspection of the frequency curves indicate platykurtic to mesokurtic curves and unimodal to bimodal grain-size distribution. The type of deposit formation is sand dune and the source is at a distal from its provenance.     

Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

云南绿春咪霞金矿成矿地质条件

咪霞金矿赋存在多元素高背景值下志留统薄层状蚀变板岩中,受北西向F6-1断裂及正长岩、煌斑岩控制,与多元素异常、黄铁矿化等多种围岩蚀变对应,具较好的成矿地质条件。     

西藏俄卡地银多金属异常区地球化学

异常形态、分布严格受推覆断裂控制,范围大、浓集中心明显,浓度变化及因子载荷表明。区内找Ag、Pb有利,而Sb又为其最佳指示元素。     

阿尔金地区构造应力场及其对金属矿产分布的控制作用

构造应力场研究可以为区域矿产预测提供依据。主要根据节理、擦痕的测试分析，结合区域构造解析，确定阿尔金山东西向拉配泉－－红柳沟构造带经历了三期不同方向的应力作用：印支期以前的南北向挤压作用，印支－燕山期的北西－南东向的挤压和中生代晚期－新生代北东东－南南西向的挤压；并利用有限元数值模拟前两期构造应力场的演变过程，进而讨论了区域构造应力场对内生金属矿产分布规律的控制作用指出了区域寻找大型内生金属矿产的有利地段。     

北衙金矿成矿地质条件浅析

北衙金矿与构造、岩浆活动、沉积建造、围岩蚀变等关系密切。构造具多期次活动特点，近NS向断裂控制主矿体展布。岩浆活动具多个喷发旋回。金矿体赋存于褐铁矿体(层)中，产出空间和时间上与正长斑岩有密切的成生关系。磁异常值较高地段，预示着有褐铁矿体(层)存在。化探异常的浓集区，均指示金矿的存在。     

湖南黄金洞金矿毒砂中Au赋存状态的电子探针研究

本文利用ＪＸＡ－８８００Ｍ超大型电子探针，以湖南黄金洞金矿含金毒砂为研究对象。利用金特征Ｘ－射线扫描方法和微区含金含量，对不可见金赋存状态的研究方法和温试条件进行了探索，先观察背散射电子图像，排除金在含金矿物毒砂中呈显显微颗粒存在的可能性，继而用ＬｉＦ晶体测定金Ｌ＝８８．７６Ｌａｌ峰位，然后逐渐放大倍数（ｘ３００，ｘ１０００，ｘ５０００，ｘ３００００，ｘ２０００００）进行金特征，Ｘ－射线连续测量，，结果发现金元素总 是均匀分布在重砂中，从而证实了金呈品格金形式存在的推测。     

云南老王寨金矿煌斑岩地球化学研究中的某些问题──与宋新宇等同志商榷

本文对“云南老王寨金矿煌斑岩地球化学研究”一文中的部分结论及其解释，提出一些不同意见与原文作者宋新宇等先生商榷