Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.     

具有经济性前景的粗岩屑堆天然冷能集聚分析

The coarse-detrital deposits have the properties of cold accumulation and maintenance of cold for a long time. Now, at some place where the mean annual temperature of air is positive, one even can get the permafrost by artificial formation of the burial mound. According to these properties, some lowenergy storehouses are built for various purposes.     

川西北下二叠统栖霞组微生物丘的发现及地质意义*

通过野外露头与钻井剖面的室内外分析,确认在四川盆地西北部(川西北)下二叠统栖霞组中发育有微生物丘,它们主要由凝块灰(云)岩、叠层灰(云)岩和微生物粘结颗粒灰(云)岩等组成。这些微生物碳酸盐岩发育较为典型的凝块、叠层、窗格、粘结等组构。微生物丘大小不一,实测高度一般为几十厘米至几米,宽度通常变化于几米至几十米之间,具有底平顶凸的典型丘形外貌,以发育向上变浅的沉积序列为特征,一般由丘基、丘核、丘盖3个微相组成,也可与颗粒滩共同构成微生物丘滩复合体。基于区域古地理背景和微生物丘特征的剖析,认为川西北地区栖霞期沉积环境总体受限,推测为半局限—局限台地环境,水深较浅,能量普遍不高;海平面频繁的相对升降变化和微生物丘的侧向迁移叠置,导致发育于缓坡背景下的碳酸盐岩台地极易受限,引起早期沉积物发生与丘滩发育密切相关的准同生期白云石化作用。因此,微生物丘滩复合体是栖霞组白云岩储集层发育的物质基础,台缘坡折带、台内缓坡折带和高地是栖霞组白云岩储集层发育的有利区带,这对寻找规模性层位不稳定的带状白云岩储集层具有重要的指导作用,并将大大拓展栖霞组白云岩储集层的勘探领域。     

Numerical assessment of tsunami attack on a rubble mound breakwater using OpenFOAM®

A numerical assessment study of tsunami attack on the rubble mound breakwater of Haydarpasa Port, located at the southern entrance of the Istanbul Bosphorus Strait in the Sea of Marmara, Turkey, is carried out in this study using a Volume-Averaged Reynolds-Averaged Navier-Stokes solver, IHFOAM, developed in OpenFOAM^® environment. The numerical model is calibrated with and validated against the data from solitary wave and tsunami overflow experiments representing tsunami attack. Furthermore, attack of a potential tsunami near Haydarpasa Port is simulated to investigate effects of a more realistic tsunami that cannot be generated in a wave flume with the present state of the art technology. Discussions on practical engineering applications of this type of numerical modeling studies are given focusing on pressure distributions around the crown-wall of the rubble mound breakwater, and the forces acting on the single stone located behind the crown-wall at the rear side of the breakwater. Numerical modeling of stability/failure mechanism of the overall cross-section is studied throughout the paper.The present study shows that hydrodynamics along the wave flume and over the breakwater can be simulated properly for both solitary wave and tsunami overflow experiments. Stability of the overall cross-section can only be simulated qualitatively for solitary wave cases; on the other hand, the effect of the time elapsed during tsunami overflow cannot be reflected in the simulations using the present numerical tool. However, the stability of the overall cross-section under tsunami overflow is assessed by evaluating forces acting on the rear side armor unit supporting the crown-wall of the rubble mound breakwater as a practical engineering application in the present paper. Furthermore, two non-dimensional parameters are derived to discuss the stability of this armor unit; and thus, the stability condition of the overall cross-section. Approximate threshold values for these non-dimensional parameters are presented comparing experimental and numerical results as a starting point for engineers in practice. Finally, investigations on the solitary wave and tsunami overflow experiments/simulations are extended to the potential tsunami simulation in the scope of both representation of a realistic tsunami in a wave flume and stability of the rubble mound breakwater.     

Fundamental study for morphodynamic modelling: Sand mounds in oscillatory flows

Experiments on sand mounds in oscillatory flow, undertaken in controlled, large-scale laboratory conditions, have produced well-defined data sets for model comparison. Three bathymetries with different levels of submergence, including a surface-piercing case, were tested. The maximum slope was about 1:5.5. Sediment transport is due to bed load with ripple formation. The principal time-dependent bulk parameters are the vertical distance of the centre of gravity above the base and the volume of the mound. A semi-implicit finite-volume depth-averaged hydrodynamic model is used to drive morphodynamics, using van Rijn's sediment flux model generalized to take account of bed slope, and some justification is given for depth-averaged modeling in these conditions. Starting the model runs with the conditions at the end of the first cycle avoided initial atypical physical behaviour. In general good predictions were obtained with an angle of repose reduced from the standard value of about 30° for stationary beds to 15°. For these situations, morphodynamics was largely unaffected by a hydrodynamic roughness height in the range 2.5D₅₀ to 51D₅₀, with larger values accounting for ripple roughness. The reduced angle of repose may be physically expected with mobile beds but this specific value is only expected to be suited to this form of bed motion. In one case an exaggerated ripple formed near the top of the mound reducing agreement with experiment. For the submerged case with normal ripple structure excellent predictions were obtained. For the initially surface-piercing mound, the time of submergence was better predicted with a 30° angle of repose, presumably due to the prominent influence of the near stationary bed near the wet/dry interface, although long term predictions were better predicted with 15°. The occurrence of vortex shedding in the first cycle modeled was in agreement with experimental observation.     

Hydrostatic-system palsas at Toolik lake,Alaska: Field observations and simulation

Stratigraphic and chemical data from the ice core of an ‘anthropogenic palsa’ at Toolik Lake, Alaska, indicate that the mound formed as a consequence of hydrostatic pressure developed in an isolated hydrologic system within the active layer. Survey data for five palsas over a three-year period suggest that growth was essentially complete at the time of the initial survey; a net decrease of summit elevation is apparent in all five mounds, but complete degradation of the palsas would require several decades at observed rates. Because accurate field measurements of thermal and hydrologic evolution in such features are extremely difficult, simulation of the environmental conditions and events involved in palsa growth is an important supplement to field observation. Both analytic and finite-element models yield results that are in substantial agreement with inferences drawn from observational data.     

Zinc-rich Pyrite from the TAG Active Mound, the TAG Hydrotherma Field, Mid-Atlantic Ridge

Abstract: Pyrite rich in Zn, up to 3.1 wt%, was found in the TAG active mound of the TAG hydrothermal field, the slow-spreading Mid-Atlantic Ridge at 26°08'N and 44°49'W. The Zn-rich pyrite is characterized by an optical homogeneity, a homogeneous distribution of Zn in the back-scattered electron images, both at a magnification of about 500, a negative correlation between Fe and Zn contents of the pyrite and a rather small unit cell edge (a₀ = 5.4117 ± 0.0008Å), strongly indicating that the detected Zn is present in the pyrite in solid solution. Such Zn concentrations are observed exclusively in dendritic pyrite, suggesting that the Znrich pyrite grew from hydrothermal fluids of a high degree of supersaturation due to quenching on the seafloor.     

The geotechnical effects of long human habitation (2000< years): Earthquake induced landslide hazard in the city of Zefat, northern Israel

This work studies the effects of long human habitation on site geotechnical conditions. It is focused on the city of Zefat that is located on the borders of the Dead Sea Transform in northern Israel. The city of Zefat, suffered severe damage and loss of life in historical earthquakes, as a consequence of earthquake induced landslides (EILS). In this work we evaluate the current EILS hazard for the city of Zefat using a GIS-based regional Newmark analysis, with calibration of the calculated Newmark displacement (representing EILS hazard) using maps of field evidence and historical documents testifying to slope instability that occurred in historical earthquakes.

We found that the core city of Zefat is built on a layered anthropogenic material, few meters deep which, was deposited as a result of more than 2000 years of human habitation. The anthropogenic material is mechanically weak, susceptible to slope failure and to amplification of seismic-shaking. It is responsible for the city's devastation in historical earthquakes and it is the source for the current high seismic hazard as well.

Our model shows that earthquakes of magnitudes (M_w) 5, 6 and 7 at distances of up to 10 km, 50 km and more than 100 km, respectively, are likely to induce landslides in the core city of Zefat. The current engineering status of the city is poor, and as a consequence severe damage and loss of life are expected in future earthquakes due to EILS, unless major engineering efforts are made. Cities in the Eastern Mediterranean with comparable long habitation histories (e.g., Jerusalem, Tiberias, Nablus, Amman) are expected to have similar geotechnical problems in their old sections and are advised to take appropriate engineering steps to reduce damage and loss of life in future earthquakes.

Evaluation of historical earthquake magnitudes based on reported local-damage may, however, lead to overestimated magnitudes where the damaged sites are built on anthropogenic talus (a common setting in the vicinity of the Dead Sea Transform).     

Prediction of overland flow and seepage zones associated with the interaction of multiple infiltration devices (cascading infiltration devices)

Infiltration devices are traditionally evaluated as standalone entities that do not interact with each other. A model is outlined that will allow interactions between proposed infiltration devices to be predicted prior to a development commencing. The model allows prediction of seepage into downslope devices and the assessment of the locations where the combined ground‐water mound will reach the surface and result in overland flow. The volume of overland flow discharged by the seepage zone may exceed the overland and piped flow received by the infiltration devices. Copyright © 2007 John Wiley & Sons, Ltd.