High-T, low-P metamorphism in the Palaeoproterozoic Halls Creek Orogen, northern Australia: the middle crustal response to a mantle-related transient thermal pulse

High‐T, low‐P metamorphic rocks of the Palaeoproterozoic central Halls Creek Orogen in northern Australia are characterised by low radiogenic heat production, high upper crustal thermal gradients (locally exceeding 40 °C km^?1) sustained for over 30 Myr, and a large number of layered mafic‐ultramafic intrusions with mantle‐related geochemical signatures. In order to account for this combination of geological and thermal characteristics, we model the middle crustal response to a transient mantle‐related heat pulse resulting from a temporary reduction in the thickness of the mantle lithosphere. This mechanism has the potential to raise mid‐crustal temperatures by 150–400 °C within 10–20 Myr following initiation of the mantle temperature anomaly, via conductive dissipation through the crust. The magnitude and timing of maximum temperatures attained depend strongly on the proximity, duration and lateral extent of the thermal anomaly in the mantle lithosphere, and decrease sharply in response to anomalies that are seated deeper than 50–60 km, maintained for <5 Myr in duration and/or have half‐widths <100 km. Maximum temperatures are also intimately linked to the thermal properties of the model crust, primarily due to their influence on the steady‐state (background) thermal gradient. The amplitudes of temperature increases in the crust are principally a function of depth, and are broadly independent of crustal thermal parameters. Mid‐crustal felsic and mafic plutonism is a predictable consequence of perturbed thermal regimes in the mantle and the lowermost crust, and the advection of voluminous magmas has the potential to raise temperatures in the middle crust very quickly. Although pluton‐related thermal signatures significantly dissipate within <10 Myr (even for very large, high‐temperature intrusive bodies), the interaction of pluton‐ and mantle‐related thermal effects has the potential to maintain host rock temperatures in excess of 400–450 °C for up to 30 Myr in some parts of the mid‐crust. The numerical models presented here support the notion that transient mantle‐related heat sources have the capacity to contribute significantly to the thermal budget of metamorphism in high‐T, low‐P metamorphic belts, especially in those characterised by low surface heat flow, very high peak metamorphic geothermal gradients and abundant mafic intrusions.     

Groundwater transformation of a low-sulfur to a high-sulfur coal, the Harlem coal of the northern Appalachian basin

The Harlem coal is postulated to have been deposited in raised-bog settings. It was initially deposited as low-sulfur peat, but groundwater of a later origin altered portions of it to high-sulfur coal. The total sulfur content of 172 samples from 31 locations on a moisture- and ash-free basis have a quadrimodal distribution with two major modes at 0.75% S and 2.0%S. Multiple sampling and analyses at specific mine sites indicate that the addition of sulfur of a later origin occurred either laterally adjacent to sandstone channels or vertically adjacent to faults. Significant sulfur addition also occurred above clay partings at these sites. The original low-sulfur nature is preserved where the coal bed is isolated from descending groundwater by a thick impervious layer. Trace-element analyses show high concentrations of mobile elements such as Na and Mn in the high-sulfur coals.     

Near-vertical seismic reflection image using a novel acquisition technique across the Vrancea Zone and Foscani Basin, south-eastern Carpathians (Romania)

The DACIA PLAN (Danube and Carpathian Integrated Action on Process in the Lithosphere and Neotectonics) deep seismic sounding survey was performed in August–September 2001 in south-eastern Romania, at the same time as the regional deep refraction seismic survey VRANCEA 2001. The main goal of the experiment was to obtain new information on the deep structure of the external Carpathians nappes and the architecture of Tertiary/Quaternary basins developed within and adjacent to the seismically-active Vrancea zone, including the Focsani Basin. The seismic reflection line had a WNW–ESE orientation, running from internal East Carpathians units, across the mountainous south-eastern Carpathians, and the foreland Focsani Basin towards the Danube Delta. There were 131 shot points along the profile, with about 1 km spacing, and data were recorded with stand-alone RefTek-125s (also known as “Texans”), supplied by the University Texas at El Paso and the PASSCAL Institute. The entire line was recorded in three deployments, using about 340 receivers in the first deployment and 640 receivers in each of the other two deployments. The resulting deep seismic reflection stacks, processed to 20 s along the entire profile and to 10 s in the eastern Focsani Basin, are presented here. The regional architecture of the latter, interpreted in the context of abundant independent constraint from exploration seismic and subsurface data, is well imaged. Image quality within and beneath the thrust belt is of much poorer quality. Nevertheless, there is good evidence to suggest that a thick (10 km) sedimentary basin having the structure of a graben and of indeterminate age underlies the westernmost part of the Focsani Basin, in the depth range 10–25 km. Most of the crustal depth seismicity observed in the Vrancea zone (as opposed to the more intense upper mantle seismicity) appears to be associated with this sedimentary basin. The sedimentary successions within this basin and other horizons visible further to the west, beneath the Carpathian nappes, suggest that the geometry of the Neogene and recent uplift observed in the Vrancea zone, likely coupled with contemporaneous rapid subsidence in the foreland, is detached from deeper levels of the crust at about 10 km depth. The Moho lies at a depth of about 40 km along the profile, its poor expression in the reflection stack being strengthened by independent estimates from the refraction data. Given the apparent thickness of the (meta)sedimentary supracrustal units, the crystalline crust beneath this area is quite thin (< 20 km) supporting the hypothesis that there may have been delamination of (lower) continental crust in this area involved in the evolution of the seismic Vrancea zone.     

CMF模式的排他性依据和造山型银矿实例：东秦岭铁炉坪银矿同位素地球化学

河南熊耳山区的铁炉坪银矿定位于高级变质基底中的NE向断裂带中,是熊耳山脉状造山型金、银、铅锌矿床的重要组成部分。成矿作用包括了早、中、晚3个阶段,分别形成石英-黄铁矿,多金属硫化物和碳酸盐脉3类矿物组合。早阶段成 矿温度大约为373℃左右,成矿流体δD=-90‰,δ~(13)C_(co_2)=2.0‰,δ~(18)O=9‰,来源较深;晚阶段流体温度<203℃,δD=70‰,δ~(13)C_(co_2)=-1.3‰,δ~(18)O=-2‰,属于浅源大气降水热液;中阶段流体均一温度210～249℃,δD=-109‰,δ~(13)C_(co_2)=0.1‰,δ~(18)O=2‰,是深源与浅源流体的混合。对比讨论表明,熊耳山区的早前寒武纪变质基底、熊耳群火山岩和燕山期花岗岩类的三者之一或它们的混合物,均无法提供具有早阶段流体D-O-c同位素组成(高δ~(18)O和δ~(13)C,低δD)的成矿流体,表明早阶段流体来自栾川群和管道口群的碳酸盐-页岩-硅质岩建造的变质脱水作用。矿石硫同位素组成较低,铅同位素比值较高,同样不可能来自熊耳山的主要地质体,更不可能来自其下伏的地幔和下地壳,指示成矿物质和流体应主要来自栾川群和管道口群。尽管栾川群和管道口群地层的同位素地球化学研究尚待补充,铁炉坪银矿的同位素地球化学特征似乎只能借助碰撞造山成岩成矿与流体作用模式才能合理解释。即华南与华     

西秦岭铧厂沟金矿床流体包裹体特征研究及矿床成因

铧厂沟金矿位于西秦岭勉略缝合带南侧,其产出受韧脆性剪切带控制,赋矿围岩为泥盆系细碧岩、凝灰质绢云千枚岩和灰岩。根据脉体穿切关系和矿物交代关系,可以将铧厂沟金矿分为早、中、晚3个成矿阶段。在铧厂沟金矿的石英中发育了CO₂-H₂O型、纯CO₂型、H₂O溶液型和含子矿物型四种类型流体包裹体。早期石英中原生包裹体主要是CO₂-H₂O型和纯CO₂型,其成分为CO₂+H₂O±N₂±CH₄±H₂S,均一温度集中在320~360℃,盐度为0.43%~5.14% NaCleqv;中阶段为主成矿阶段,该阶段石英中包含了所有四种类型的包裹体,其中H₂O溶液型包裹体占了大多数,CO₂-H₂O和水溶液包裹体均一温度集中在240~320℃,盐度为0.43%~11.19% NaCleqv;晚阶段石英仅发育水溶液型包裹体,具有较低的均一温度(118~228℃)和盐度(0.18%~6.59% NaCleqv)。根据CO₂-H₂O型包裹体计算主成矿阶段压力为70~195MPa,成矿深度为5~7km。总体而言,铧厂沟金矿的初始流体具有中高温、富CO₂、低盐度的变质流体特征,晚成矿阶段流体演化为低温、低盐度水溶液流体,流体的不混溶导致了主成矿期的矿质的大量沉淀,铧厂金矿为中浅成的造山型矿床。     

新疆阿尔泰塔拉特铁铅锌矿床流体包裹体研究及矿床成因

塔拉特铁铅锌矿位于新疆阿尔泰造山带南缘的阿巴宫多金属成矿带,矿体赋存于克兰盆地下泥盆统康布铁堡组中,为一套海相中酸性火山岩-火山碎屑岩、陆源碎屑沉积岩-碳酸盐岩建造,脉状矿体受阿巴宫大断裂次级断裂控制.根据矿物组合和脉体穿插关系,塔拉特铁铅锌矿可分为4个成矿阶段:矽卡岩,氧化物,硫化物和碳酸盐阶段,后3个阶段均有石英共生.其中,硫化物(方铅矿-闪锌矿±磁黄铁矿±黄铜矿)阶段是铅锌成矿的主要阶段.不同阶段石英中广泛发育流体包裹体,可分为水溶液包裹体(W型)、纯CO2包裹体(PC型)、CO2-NaCl-H2O包裹体(C型)及含子矿物多相包裹体(S型)4类.冷热台显微测温和激光拉曼分析表明,氧化物阶段石英含有4种类型的包裹体,以W型为主,C型和S型包裹体次之,包裹体均一温度介于271～ 426℃,W型和C型盐度范围0.5％～22.4％ NaCleqv,S型包裹体盐度30.5％ ～40.6％ NaCleqv;硫化物阶段的石英流体包裹体为W型、C型和PC型,均一温度为204 ～ 269℃,盐度介于0.2％～15.6％ NaCleqv之间;碳酸盐阶段的矿物只含W型包裹体,均一温度集中在175～211℃之间,盐度为1.1％ ～9.9％ NaCleqv.利用C型包裹体对硫化物阶段成矿压力估算,得到107 ～ 171MPa,对应深度为4～6km.塔拉特铁铅锌矿初始成矿流体具有高温、高盐度、富CO2的特征,但碳酸盐阶段低盐度、贫CO2,流体不混溶和混合作用导致了成矿物质的沉淀.塔拉特铁铅锌矿的地质和成矿流体特征显示其为碰撞造山体制形成的矽卡岩型成矿系统.     

江南造山带新元古代中期(830～750Ma)岩浆活动及对构造演化的制约

连接扬子地块和华夏地块的江南造山带是华南前寒武纪最重要的构造单元,其形成和演化长期以来备受关注。在江南造山带的范围内广泛发育了新元古代岩浆岩,它们是探讨江南造山带构造演化的重要对象,但其成因和形成的构造背景却备受争论。本文系统收集和分析了江南造山带830~820 Ma花岗岩、800~780 Ma酸性岩和800~750 Ma基性岩的地球化学数据。研究表明,不同时间段的岩石成因类型存在系统差异,830~820 Ma的花岗岩主要为S型花岗岩,800~780 Ma的酸性岩主要为A型酸性岩,而800~750 Ma的基性岩以拉斑系列和碱性系列为主,并在构造判别图中显示了板内玄武岩(WPB)和洋中脊玄武岩(MORB)的特征。综合同位素年代学、岩石地球化学和沉积学等学科领域的研究成果我们认为:扬子北缘和西缘应先于东南缘在1000~900 Ma期间发生碰撞,而此时的东南缘仍为活动大陆边缘;直到~830 Ma,扬子地块与华夏地块沿江南造山带发生拼贴,但只是陆-弧-(微)陆之间的"软碰撞",而无山脉隆升和高级变质作用,各个块体之间处于"联而不合"的状态,大洋岩石圈拆沉之后的软流圈上涌和由拆沉所引起的拉张作用导致了上覆岩石圈和陆壳发生部分熔融,产生了江南造山带830~820 Ma的S型花岗岩;随着全球Rodinia超大陆的裂解,~820 Ma,华南裂谷盆地开启,并在随后的裂解过程中发育了大量与伸展有关的800~780 Ma A型酸性岩和基性岩脉/墙,而其明显高于同时代MORB源区的地幔潜能温度显示,导致Rodina超大陆裂解的地幔柱可能对该时期岩浆岩的地幔源区有一定影响;随着拉张作用的不断加强,出现了760~750 Ma碱性系列和具MORB特征的基性岩,此时的软流圈地幔既提供热量又有物质供应。     

锆石Hf和全岩Nd同位素填图研究进展:以三江特提斯造山带为例

近年来,区域性的Nd-Hf同位素填图正成为探索岩石圈结构和演化,制约陆块边界位置和壳-幔相互作用以及它们与金属成矿作用耦合关系的重要研究方法。目前的研究主要集中于中国的拉萨地体以及澳大利亚太古宙尤冈克拉通,包括地体地壳性质与空间变化规律、成矿系统约束和区域找矿潜力等方面。本文以三江特提斯造山带为例,使用克里格插值法在MAPGIS平台完成同位素等值线图,基此解析三江地区岩石圈结构以及大规模成矿作用。Nd-Hf同位素填图支持昌宁-孟连缝合带为冈瓦纳和泛华夏古陆的分界。昌宁-孟连缝合带划分了两个εNd(t)同位素明显不同的异常区,缝合带以西表现为古老地壳基地组成,而缝合带以东部表现为较年轻的地体。三江特提斯造山带中不同类型与岩浆岩有关的发矿床大多汇聚在同位素边界处,这些同位素边界可能代表着地体边界或缝合带、岩浆弧。沿金沙江-哀牢山缝合带分布的斑岩型或斑岩-矽卡岩型Cu-(Mo)矿床,具有高εHf(t)正值和较高εNd(t)负值的特征,对应始新世钾质斑岩及有关的矿化。在腾冲-保山地块、义敦岛弧和临沧次地块,具有低εHf(t),低εNd(t)值岩浆岩分布特征,主要形成与过铝质花岗岩型有关的锡-钨矿床。因此,我们认为区域尺度的同位素填图对研究岩石圈结构和演化、解剖壳-幔相互作用机理、解析深部动力学机制和成矿机制、总结区域成矿规律和指导区域成矿潜力具有重要意义。     

西秦岭温泉钼矿床成矿作用时限及其对斑岩型钼矿床系统分类制约

斑岩系统是一个涉及岩浆和热液作用的复杂系统,建立精细的斑岩系统成因模型对于寻找更为丰富的金属矿产尤为重要,成矿作用时限是建立成因模型和指导矿产勘查的关键。温泉钼矿床是西秦岭造山带内与晚三叠世花岗岩有关的斑岩型钼矿床,其在西秦岭造山带的独特发育蕴含印支期斑岩成矿作用、大陆地壳演化及矿产勘查关键科学问题。钼矿体主要赋存于温泉复式岩体Ⅱ单元和Ⅲ单元的黑云母二长花岗斑岩和似斑状二长花岗岩中,钼以细脉和浸染状矿化形式产出。赋矿岩石单元锆石U-Pb年龄为224.6±2.5Ma到216.2±1.7Ma,Ⅱ和Ⅲ单元分别侵位于~223Ma和~217Ma,持续约8Myr。辉钼矿Re-Os年龄为212.7±2.6Ma到215.1±2.6Ma,暗示晚三叠世钼成矿作用与花岗质岩浆作用密切时空关系,且成矿年龄稍晚,反映钼矿化主要发生在岩浆作用晚期阶段。成岩、成矿作用发生于华北板块与华南板块全面对接后秦岭造山带构造体制由碰撞到后碰撞的转折阶段,响应南秦岭变质变形、勉-略洋盆闭合及大别-苏鲁超高压岩石板片折返统一地质事件。黑云母K-Ar年龄为207~226Ma,可能反映~223Ma和~208Ma的岩体冷却事件和~216Ma的岩浆-热液成矿作用。锆石U-Pb、辉钼矿Re-Os和黑云母K-Ar多元同位素定年系统准确刻画岩体侵位、热液成矿与冷却事件上有所重叠,岩浆-热液分异演化充分,且具有较高的冷却速率,精确厘定温泉斑岩系统岩浆活动的"多期性"(复式岩体)、成矿事件的"瞬时性"(~214Ma)和成矿作用的"持续性"(~8Myr)。同时,系统对比全球典型斑岩钼(铜)矿床成矿动力学背景,细化分类方案,即产于挤压背景的大洋俯冲和大陆碰撞环境矿床及产于伸展背景的后碰撞、陆缘弧后和板内裂谷环境矿床。明确在大洋俯冲→大陆碰撞→后碰撞→板内裂谷旋回的四个阶段均可以产生规模的斑岩型钼(铜)矿床,且挤压向伸展过渡的构造体制转换尤其是大型矿床形成的有利环境。     

Paleomagnetism of the Carboniferous Rouchel Block,Tamworth Belt,and pole path revision for the New England Orogen,eastern Australia

Structural, magnetic and gravity trends of the southern New England Orogen (SNEO) indicate four oroclinal structures, none conclusively confirmed paleomagnetically. Curved structures of the Tamworth Belt (TB)—a continental forearc exposed across six tectono-stratigraphic blocks with interlinked Carboniferous stratigraphies and extensive ignimbritic rocks known to retain primary magnetisations despite prevalent overprinting—are prospective to oroclinal testing through comparison of Carboniferous pole paths for individual blocks. Pole paths (a) have been established for the Rocky Creek and Werrie blocks (northwestern/western TB), (b) are described herein for the Rouchel Block (southwestern TB), and (c) are forthcoming for the Gresford and Myall blocks (southern/southeastern TB). The Rouchel path derives from detailed paleomagnetic, rock magnetic and magnetic fabric studies. Thermal, alternating field and liquid nitrogen demagnetisations show a low-temperature overprint, attributed to late Oligocene weathering, and high-temperature (HT) primary and overprint components in both magnetite and hematite carriers, showing slight, systematic, directional differences with hematite providing the better cleaned site poles. Seven primary mean-site poles of Tournaisian and mainly Visean age and three overprint poles show six positive fold tests, five at 95% or higher confidence levels. Two dispersed groupings of intermediate (IT) and HT overprint site poles of Permian and Permo-Triassic age are attributed to early and late phases in oroclinal evolution of the SNEO. HT and IT/HT overprint site poles of mid-Carboniferous age are attributed to Variscan Australia–Asia convergence. Individual pole paths for the Rocky Creek, Werrie and Rouchel blocks show no noticeable rotation between them, indicating primary curvature for the southwestern TB. Their integrated SNEO pole path establishes a reference frame for determining rotations of the southern and southeastern TB.