ODP与冲绳海槽海底热水活动研究

本文简要介绍了ＯＤＰ与海底热水活动研究，冲绳海槽中部现代海底热水活动区热水活动研究简况及其热水活动特征；就冲绳海槽中部热水活动研究中存在的问题与ＯＤＰ在冲绳海槽热水区钻探的科学目标进行了讨论。     

渤、黄、东海底摩擦系数的研究

本文将伴随法用于渤、黄、东海M2分潮的数值模拟,利用Topex／Poseidon高度计资料进行同化,优化海底摩擦系数。文中对底摩擦系数取常数时进行了优化,同时还对底摩擦系数的一种新的处理方法进行了研究,即在计算海区选取一些点给定底摩擦系数,海区中任意一点的底摩擦系数由这些点的底摩擦系数线性播值得到,优化后得到空间分布的底摩擦系数。针对两种不同的线性底摩擦假设分别进行了一系列的实际实验,结果表明由空间分布的底摩擦系数得到的模拟值比底摩擦系数取常数得到的模拟值更接近观测值,能有效地提高数值模拟的精度。     

On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

浮体间距对多浮体系统水动力系数的影响

根据三维线性势流理论，采用格林函数法，对多浮体系统的水动力系数进行了数值分析。数值算例中给出了在固定波频下水动力系数与浮体间相对位置关系曲线。水动力系数的变化幅度随着浮体间距离增大而变小。随着浮体间距的变化，水动力系数极值的出现具有明显的规律，相邻的极大值(或极小值)的间距为半个波长或一个波长。     

Performance of hemi-cylindrical and rectangular submerged breakwaters

A parametric experimental study is conducted to compare the reflection and transmission characteristics of submerged hemi-cylindrical and rectangular rigid and water-filled flexible breakwater models. The results show that, for the rigid breakwaters, rectangular models are more effective than hemi-cylindrical ones in terms of reduction of transmitted waves. As for the flexible breakwaters, the hemi-cylindrical models may give better wave reflection than rectangular ones. However, the energy loss induced by the rectangular breakwaters is much larger and more significant to result in an overall better efficiency in terms of reduction in wave transmission. The effects of internal pressure show that the lowest pressurized flexible models considered in this work are the most effective in the reduction of the transmitted wave height. Higher wave reflection, lower wave transmission and higher energy loss are obtained consistently at the lower submergence depth ratio.     

基于岭估计的有理多项式参数求解方法

在使用最小二乘法解算卫星遥感影像的RPC参数时,如果控制点非均匀分布或模型过度参数化,其法方程系数矩阵很容易产生病态,获得的解将偏离真值,甚至得到错误的解.使用岭估计可改善法方程的状态,保证解稳定.采用岭估计方法,通过所获取的不同岭参数对SPOT和QuickBird影像进行实验,证实L曲线法是一种稳定的、有效的岭参数确定方法,可显著提高RPC参数的解算精度.     

苯和甲苯在盐水溶液中活度系数及其盐效应的研究

采用紫外分光光度法测定了24.0℃时苯和甲苯在CH3COONa,(NH4)2SO4,MgSO4,Na2SO4和Na2CO3水溶液中的活度系数(f),它们的lgf-Cs关系符合Setschenow盐效应公式,计算了苯和甲苯在上述5种盐水溶液中的盐析系数。     

Determining Q of near-surface materials from Rayleigh waves

High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (V_S), compressional (P)-wave velocity (V_P), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor Q_P and S-wave quality factor Q_S in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting Q_S from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from Q_P cannot be ignored when Vs/V_P reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert Q_P from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to Q_P than to Q_S. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.