ADV measurements of velocity distributions in a gravel‐bed flume

Velocity measurements carried out by an acoustic doppler velocimeter (ADV) in a rectangular laboratory ?ume having a gravel bed are presented. The velocity pro?les are measured in six verticals of the channel cross‐section having an increasing distance (from 4 to 38·5 cm) from the ?ume wall. The experimental runs are carried out for ?ve different bed arrangements, characterized by different concentrations of coarser elements, and for the two conditions of small‐ and large‐scale roughness. For both hydraulic conditions, the velocity measurements are ?rst used to test the applicability of the Dean pro?le and of the logarithmic pro?le corrected by a divergence function proposed in this paper. Then, for each value of the depth sediment ratio h/d₈₄, the non‐dimensional friction factor parameter is calculated by integration of the measured velocity distributions in the different verticals of the cross‐section. Finally a semi‐logarithmic ?ow resistance equation is empirically deduced. Copyright © 2003 John Wiley & Sons, Ltd.     

Water and sediment outbursts from advanced Franz Josef Glacier,New Zealand

The Franz Josef Glacier, Westland, New Zealand, has a history of catastrophic sediment‐laden outburst ?oods associated with extreme rainfall events when the glacier toe is advanced over its own sediments. Consideration of these events and inspection of recent sediment deposits suggest that there are three distinct modes of outburst. The ?rst is associated with fans fed by over?ow along the glacier margin. As the glacier has advanced across its own fore?eld gravels, it is inferred that the primary drainage conduit has developed a reach of negative slope. In high ?ows massive boulders can block the conduit, trapping lesser clasts. The resulting backup of water causes over?ows through marginal moulins, producing the fan type of deposit. The second type of outburst deposits massive imbricated boulders at a greater or lesser distance from the glacier portal. In this case, pressure buildup drives the blockage out of the portal where the boulders deposit. Smaller materials are generally carried away. The third type consists of very shallow ?ows, and produces massive gravel deposits of uncertain provenance. In this condition, the excess pressure in the conduit results in slight uplift of the glacier and widespread discharge of water and sediment below the glacier snout; gravels and smaller sediments are laid down in a massive deposit across the fore?eld. The massive, boulder‐veneered deposit from the December 1995 outburst is interpreted in the light of the above mechanisms as a hyperconcentrated ?ow deposit from hydraulic jacking, overlain by boulders emplaced by a subsequent conduit outburst. A possible association of outbursts with the present advanced position of the glacier is suggested. Copyright © 2003 John Wiley & Sons, Ltd.     

Landslide susceptibility analysis using GIS and artificial neural network

The purpose of this study is to develop landslide susceptibility analysis techniques using an arti?cial neural network and to apply the newly developed techniques to the study area of Yongin in Korea. Landslide locations were identi?ed in the study area from interpretation of aerial photographs, ?eld survey data, and a spatial database of the topography, soil type and timber cover. The landslide‐related factors (slope, curvature, soil texture, soil drainage, soil effective thickness, timber age, and timber diameter) were extracted from the spatial database. Using those factors, landslide susceptibility was analysed by arti?cial neural network methods. The landslide susceptibility index was calculated by the back‐propagation method, which is a type of arti?cial neural network method, and the susceptibility map was made with a geographic information system (GIS) program. The results of the landslide susceptibility analysis were veri?ed using landslide location data. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide location. A GIS was used to ef?ciently analyse the vast amount of data, and an arti?cial neural network to be an effective tool to maintain precision and accuracy. The results can be used to reduce hazards associated with landslides and to plan land use and construction. Copyright © 2003 John Wiley & Sons, Ltd.     

Modelling transverse dunes

Transverse dunes appear in regions of mainly unidirectional wind and high sand availability. A dune model is extended to two‐dimensional calculation of the shear stress. It is applied to simulate dynamics and morphology of three‐dimensional transverse dunes. In the simulations they seem to reach translational invariance and do not stop growing. Hence, simulations of two‐dimensional dune ?elds have been performed. Characteristic laws were found for the time evolution of transverse dunes. Bagnold's law of the dune velocity is modi?ed and reproduced. The interaction between transverse dunes led to the interesting conclusion that small dunes can travel over bigger ones. Copyright © 2004 John Wiley & Sons, Ltd.     

Dust production and the release of iron oxides resulting from the aeolian abrasion of natural dune sands

Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg^?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.     

一种天绘一号卫星影像精确定位方法

针对如何最大程度地减小天绘一号卫星RPC模型系统误差,真实反映像方坐标与物方坐标关系的问题,该文介绍了天绘一号卫星的基本情况及相应的RPC参数模型,给出了求解RPC参数的基本方法和流程。结合天绘一号卫星采用等效框幅式光束法平差进行无控定位的特点,利用平差后计算得到的加密点坐标,提出了一种基于像点仿射变换的RPC模型区域网平差方法,并进行了RPC参数修正。经天绘一号卫星精度检测实验表明,修正后的RPC参数能有效地弥补系统性误差,具有更高的定位精度。     

基于多源遥感影像的长春市城市建成区提取

夜光遥感影像记录的城市灯光与人类活动密切相关,已广泛应用于城市信息提取。珞珈一号作为新一代夜光遥感数据源,比以往的夜光数据具有更高的空间分辨率和光谱分辨率,可以更清晰地表达城市建成区范围和内部结构。本文利用珞珈一号夜光遥感影像,通过人类居住指数（human settlement index, HSI）、植被覆盖和建筑共同校正的城市夜光指数（vegetation and build adjusted nighttime light urban index, VBANUI）及支持向量机（support vector machine, SVM）监督分类3种方法对长春市城市建成区进行提取,并与利用NPP/VIIRS（suomi national polar-orbiting partnership/visible infrared imaging radiometer suite）夜光遥感影像、采用同样方法得到的结果对比。结果显示：本文提出的VBANUI提高了传统植被覆盖校正的城市夜光指数（vegetation adjusted nighttime light urban index, VANUI）的提取精度,使用珞珈一号夜光遥感影像通过VBANUI提取的城市建成区结果最优,其Kappa系数为0.80,总体分类精度为90.74%;使用珞珈一号和NPP/VIIRS夜光遥感影像通过HSI按最佳阈值提取城市建成区的Kappa系数分别为0.75和0.72,总体分类精度分别为88.27%和86.54%;复合数据的SVM监督分类法中Landsat-NDBI、Landsat-NDBI-VIIRS、Landsat-NDBI-LJ和Landsat-NDBI-LJlog的Kappa系数分别为0.602、0.627、0.643和0.681,总体分类精度分别为81.11%、81.52%、82.25%和84.48%。研究结果表明：3种提取方法下,均为使用珞珈一号夜光遥感影像的结果优于使用NPP/VIIRS夜光遥感影像的结果,证明相比于NPP/VIIRS夜光遥感影像,珞珈一号夜光遥感影像更适用于城市尺度的建成区范围提取。     

Effects of variable attribute weights on landform classification

This paper focuses on the attribute weight issue and advocates use of modi?able attribute weights in terrain‐based environmental analysis and classi?cation. A question was asked: ‘How much will the result of a terrain‐based environmental analysis be affected if the weights of used terrain attributes are changed?’ The literature on landform classi?cation and the fuzzy k‐means method was reviewed in particular to help clarify the background and importance of this weight assignment issue. As an example, the effects of modifying attribute weights were evaluated for fuzzy k‐means landform classi?cation in a case study area. A total of 102 classi?cations were compared with each other and with a soil map, and comparison methods were speci?cally designed to evaluate the differences between these classi?cations. The results show that fuzzy k‐means landform classi?cation is sensitive to weight adjustments of adopted terrain attributes. The sensitivity is particularly high when the attribute weights started to be tuned away from the standard (i.e. uniform) weight of one. Better matching between landform classi?cation and a soil map may be produced when attribute weights are tuned. In all, we advocate the widespread adoption of an exploratory attitude in assigning attribute weights for environmental analysis and classi?cation. Copyright © 2006 John Wiley & Sons, Ltd.     

新疆罗布泊盐湖深部钾盐找矿新进展

罗布泊是世界最大干盐湖之一,罗布泊超大型钾盐矿床从1995年发现至今,经历了找钾远景预测、勘查、系统科学研究、扩大找矿及开发利用快速推进的过程,浅部(200m以浅)钾盐资源量已基本查明,但没有一个穿透第四系的较深地质科学钻井。通过区域气候条件、盐类矿物分布、碎屑岩层储卤等方面与柴达木盆地西部的对比分析以及罗布泊地堑式断陷带储卤的发现,提出罗布泊深部具有钾盐成矿远景。在罗布泊罗北凹地西北部实施盐湖深部钾盐找矿第一深井(LDK01井),首次发现钾芒硝、钾锶矾、红钾铁盐等盐类矿物;在深部地层碎屑岩层中发现钾盐矿物钾石盐、光卤石等,地层中KCl含量高达2.86%,揭示地层深部存在低品位固体钾矿,确定为一种新类型钾矿,即碎屑岩型钾矿,为罗布泊深部钾盐找矿拓展了方向和空间;深层碎屑岩地层储集卤水,卤水KCl平均品位1.50%,揭示出罗布泊盐湖深部存在富钾卤水。重力探测发现罗布泊盆地西部发育次级凹地,初步确定凹地中心第四系沉积厚度大于1200m。结合地质分析,预测库鲁克塔格山前断陷盆地和罗北盆地为进一步寻找深部隐伏钾盐矿床的重要靶区。综合遥感、物探、物性特征等资料及研究成果,估算罗北凹地深部钾盐预测资源量为1.60×108t,并提出罗北凹地西部及附近区域的深部地层中还蕴藏有丰富的钾盐资源,罗布泊深部找钾潜力巨大。该成果对深化认识罗布泊盐湖的形成演化及满足钾肥生产企业大规模开发均具有重要意义。     

Initial Characterisation of SK01 Sanidine: A Candidate 40Ar/39Ar Reference Material

The precision and accuracy of ⁴⁰Ar/³⁹Ar dates are ultimately linked to co-irradiated reference materials of known age. Here we provide new data from the SK01 sanidine, which was analysed in three different laboratories to evaluate it as a ⁴⁰Ar/³⁹Ar reference material. Aliquots of 5 mg, incrementally heated in two laboratories, yielded indistinguishable results with a weighted mean age of 27.58 ± 0.06 Ma (95% confidence level). Single-crystal step heating and single-crystal total fusion analyses of SK01 sanidine were undertaken in the third laboratory to further test the intracrystalline homogeneity. For the seven step-heating analyses, six crystals yielded nearly concordant age spectra with ⁴⁰Ar/³⁹Ar ages ranging from 26.853 ± 0.094 Ma to 26.963 ± 0.067 Ma, whereas one crystal gave an older age of 27.774 ± 0.071 Ma with a slightly discordant age spectrum. Twenty-three single-crystal total fusion analyses yielded ⁴⁰Ar/³⁹Ar ages ranging from 27.070 ± 0.108 Ma to 27.736 ± 0.062 Ma with a dispersion of ~ 3.8%. The older ages from single-crystal total fusion dates are interpreted to reflect an inherited or excess argon component in some crystals. This is an initial characterisation of the SK01 sanidine, and additional work needs to be conducted to further evaluate the age dispersion so that it can be utilised as a ⁴⁰Ar/³⁹Ar reference material.