平衡剖面的制作流程及其地质意义

平衡剖面技术是地质思维和计算机技术的结晶,使对断层构造的研究提高到定量阶段,其依据是在垂直构造走向的剖面上,地层长度和面积(2D)或体积(3D)是均衡的。在此原理基础上利用数学手段对盆地的构造发育史进行正演和反演模拟,直观地再现地下构造的原始几何形态,迅速提供地震剖面的构造解释方案,并对解释结果进行检验(不平衡的剖面其解释一般有问题),为深刻认识构造发育史、分析油气运移及聚集规律提供依据,提高了工作效率。其结果也为盆地模拟、油藏模拟、定量计算构造伸缩量等地质研究打下了坚实的基础[1]。     

云南天文台激光测距中使用的光电探测器

阐述了云南天文台1．2m望远镜卫星激光测距中所使用的光电探测器，并对它们的性能和使用效果做了比较。结果表明，C—SPAD是目前测距精度最高的单光子探测器。同时还论述了激光测距的工作原理和近几年来云南天文台激光测距的情况。从对GPS35、36卫星的观测结果表明，云南天文台已具备了一定的对远程卫星的测距能力，为今后远程测距、测月打下了良好的基础。     

断层相关褶皱理论在准噶尔盆地南缘山前带构造研究的应用

利用断层相关褶皱的构造几何分析方法，对准噶尔盆地南缘山前复杂构造带内基于地震剖面进行了构造解析，搭建了中、东段的构造轮廓和构造组合样式，认为东段阜康断裂带主要表现为至地表的推覆逆掩。由于位移量大部分转移至地表，阜康断裂带的前陆部分无喜山期构造带；西段造山带内的挤压往前陆方向传递过程中以前列式不断释放其位移量，造成在纵向上呈现三排主要的断层相关褶皱带。根据正演平衡地质剖面制作技术对山前复杂构造区地震剖面反射波的构造识别进行了模拟与探讨。     

调频式电涡传感器微机实现的探讨

分析了分频和ＣＴＣ计数采样中误读数的原因和解决方法，并利用微机软件实现非线性校正。此传感器用于位移测量系统中，具有０．０１ｍｍ的分辨率及优于１％的精度，可在－２０～６０℃温度范围内工作。     

激电偶极—偶极装置在撒岱沟门的找矿效果

本介绍撒岱沟相矿区应用激电偶极－偶极装置的找矿效果。通过对其成果分析和钻探证实：利用该装置所获资料，不仅能从断面上直观地推测出极化体的分布及产状变化，还能从不同深度的ηｓ平面成果中分析出极化体在地下空间赋存状态的基本轮廓。     

VERTICAL PROFII,ES OF CHL-A AND PRIMARY PRODUCTIVITY IN THE MIDDLE CONTINENTAL SHELF AREA AND EDDY AREA OF THE EAST CHINA SEA

Vertical profiles of chl-a and primary productivity in the middle continental shelf area and eddy area of the East China Sea were studied using data from a cruise in the East China Sea in February to March, 1997 and a cruise in July, 1998. The results showed that chl-a vertical distribution closely related to in situ hydrological and nutrient conditions. Chla-a concentration ranged from 0.22 to 0.35 mg/m³ and 0.93–1.09 mg/m³ in the eddy area and in the middle continental shelf area, respectively. In both areas, chl-a concentrations in deep layers were slightly higher than those in shallow layers, but was of the same order of magnitude. In summer, when a thermocline existed in the water column, highest chl-a concentrations appeared at the base of the thermocline layers in both areas. In the eddy area, chl-a concentration maximized at 31.743 mg/m³, and averaged 1.143 mg/m³ below 30 m depth. In the middle continental shelf area, the highest chl-a concentration was 2.120 mg/m³, the average was 1.168 mg/m³. The primary productivity reached 1418.76 mgC/(m²·d) in summer and 1360.69 mgC/(m²·d) in winter. In the eddy area, the primary productivity was 787.50 mgC/(m²·d) in summer and 159.04 mgC/(m²·d) in winter. Vertical carbon sinking rate from the deep layer to the bottom in both areas is also discussed in this paper. Contribution NO. 4183 from the Institute of Oceanology, Chinese Academy of Sciences. Project No. 49636210 supported by NSFC.