倒Y形竖井联系测量

介绍在小直径竖井联系测量中取消联系三角形,改用单根钢丝定点,全站仪引测高程的施测方法。     

预应力锚索技术在大型水库除险加固工程中的应用

介绍了无粘结预应力锚固技术在吉林省二龙山水库除险加固工程中的应用。对造孔、编索、下索、张拉等工艺进行了详细介绍。     

梧州某安置小区滑坡分析与治理设计研究

文章从地层岩性、地质构造、水文地质条件等方面阐述该滑坡的基本特征,运用传递系数法对滑坡进行了稳定性分析与评价,为滑坡治理设计提供了依据。根据计算结果提出了采用削坡、预应力锚索+格构梁+锚杆挂网喷射混凝土防护,并结合生物防护及地表排水措施,具有较高的实践和理论意义。     

基于线框模型的复杂断层三维建模方法

建立了包含复杂断层面地质体的三维数学模型.为准确表达复杂地质体各要素的空间几何形态及其相互之间的关联关系,设计了线框单元体模型,并提出了整体描述断层面的技术思路,解决了地层交错情况下断层面和地层面的模拟难题;在上述基础上,结合平面地质图数据,实现了复杂地质条件下三维地质体模型的构建.     

雷诺数对圆形渐缩喷嘴湍流射流的影响

The present study systematically investigates by experiment the influence of Reynolds number (Re) on a turbulent jet issuing from a smoothly-contracting round nozzle. Measurements were performed for seven Reynolds numbers varying from Re = 4,050 to Re = 20,100 using single hot-wire anemometry and over an axial distance of 30 nozzle exit diameters. Although all the exit velocity profiles are of "top-hat" shape, these measurements reveal significant dependence on Re of the exit and downstream flows. The effect of Re on both the mean and turbulent fields is substantial for Re ＜ 10,000 and becomes weak beyond Re = 10,000. The length of the jet’s potential core and the far-field rates of decay and spread all depend significantly on Re.     

地电供电系统对地磁观测的影响试验

通过试验，认为地电供电系统对地磁观测的影响主要是来自供电导线产生的磁场，其强与公式Ｈ＝１／１０．２Ｉ／ｒ计算结果基本相符。而地下电流产生的磁场是很弱的，这对避免和减小其影响提供了新思维。     

新型磁栅式引张线仪

详细介绍了新型磁栅式引张线仪的原理、基本结构和系统组成，并对仪器的误差进行了初步的分析。陆水大坝的试验结果证明，该仪器可以满足规范要求。     

古田溪一级大坝变形观测系统改造及自动化设计

本文介绍了古田汉一级大坝原有变形观测项目及存在的主要问题，提出了观测系统改造的原则和要求。详细论述了各观测项目增设、改造及自动化设计的实施方案，给出了相应的精度估算。     

电感耦合等离子体发射光谱法测定键合用硅铝丝中硅铁铜

采用电感耦合等离子体发射光谱法测定硅铝丝（Al—1％Si）中Si及杂质元素Fe和Cu。确定了最少取样量和样品溶解方法，优化了元素分析谱线和仪器的测量条件。实验表明，方法的加标回收率为99％～1叭％，相对标准偏差（n=6）低于1．4％，Si、Fe、Cu的检出限分别为8．5、1．0和0．4μg／L。该方法应用于快速测定键合硅铝丝中的各种元素，结果满意。     

Prediction of the sawing quality of Marmarit stones using the capability of artificial neural network

The sawing rate is one of the most significant and effective parameters in extracting building stones via diamond wire sawing. This parameter designates the capability of diamond wire sawing for sawing different stones; in addition, the parameter gives rise to economical considerations for quarry designers. In this study, the existent relations between stone geotechnical parameters and the sawing rate of stones via diamond wire sawing were analyzed using regression and correlation coefficient as well as the collected data from Marmarit stone quarries. Moreover, we estimated the sawing rate of Marmarit using the dimensional stone rock mass rating (DSRMR); upon comparison of the data obtained from DSRMR our pre‐collected data on quarries, we did not gain satisfactory results from DSRMR, hence we used artificial neural network (ANN). The results showed that the percentage of Silica, the coefficient of water absorption, the uniaxial compressive strength (UCS), and abrasive hardness are the proper parameters for creating the ANN. Discontinuities have the least effects possible on diamond wire sawing. Having given the training possibility of the ANN, and its ability to evaluate relations among input parameters, the ANN, which was being trained with Marmarit's traits, was an accurate network for estimating diamond wire sawing in Marmarit quarries, although it could not generalize this network for other stones such as Chini and Crystal. Copyright © 2011 John Wiley & Sons, Ltd.