Crustal structure at the easternmost termination of the Variscan belt based on CELEBRATION 2000 and ALP 2002 data

The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s^− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s^− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s^− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.     

Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

低空大比例尺地形图航测生产关键技术

针对传统航空摄影测量生产工艺在生产过程中遇到的影响大比例尺测图精度的问题,该文探讨了低空航测生产大比例尺地形图的关键技术。通过选用宽角相机、低航高飞行、强化影像匹配、野外布设标志控制点、优选平差模型、精化测图操作等改进方式,以提高大比例尺航测精度;组建无人飞艇低空航测系统,对提出的技术方法予以实现;最后给出了山西境内近30个县市建成区1∶500测绘生产实践的部分验证成果。     

浙江省台州-昌化深部构造特征探测

采用高分辨折射和宽角反射/折射综合地震探测方法,在浙江省中部沿黄岩、临海、东阳、桐庐、昌化进行深部构造探测,获得一条长约350km的速度结构剖面。探测结果表明,地壳结构具有明显的多层性,存在3个速度间断面;基底速度结构图像揭示了速度结构的横向非均匀性,这种不均匀性既对应于地质构造单元的分界线或断裂构造带,也反映出东西部构造特征的差异性。     

大别山地震波速度剖面的重力拟合及花岗岩带

笔者对穿越大别山造山带的六安—大冶宽角反射地震剖面进行了重力拟合。拟合结果表明严格按宽角反射地震速度换算成的密度剖面所产生的是一个重力高,它反映出大别山是一个穹隆,与实测大别山重力低大相径庭。只有将位于大别山山根上,南北大别之间设置一个从地表直达莫霍界面的巨大低密度体,重力曲线才能得到很好的拟合。这个低密度体应为近北西走向的花岗岩带。它与反射地震剖面上石镇透明反射地震带位置吻合,但宽度远较反射地震透明带为大。重力曲线的拟合进一步说明,在华北陆块与扬子陆块碰撞后的白垩纪时,大别山出现一个伸展期,在这个时期,大别山穹隆形成,并伴随有大规模花岗岩的侵入,超高压变质岩从地壳中下部折返到地表。研究说明,联合应用反射地震、宽角反射地震和重力,进行综合解释是必要的,可以得到更令人信服的地质结论。     

江陵凹陷北部高速玄武岩下二维广角地震初探

江汉油田江陵凹陷北部高速玄武岩发育,利用常规地震资料很难得到高速玄武岩下的地震反射。分析研究表明,广角地震有利于玄武岩下的地震成像。通过综合正演和实际地震数据完成了广角地震资料的处理,获得了江陵凹陷北部高速玄武岩下的反射地震信息。在开展广角地震波场的识别和利用研究过程中,从正演模型出发,探讨了在不同地质条件下高速层对地震波场的影响,并针对靶区资料讨论了如何识别广角地震信息。在上述基础上,通过对实际地震资料做精细的分析和处理,最终完成了高速玄武岩下地震资料的成像。     

Velocity structure in the South Yellow Sea basin based on first-arrival tomography of wide-angle seismic data and its geological implications

The South Yellow Sea basin is filled with Mesozoic–Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic–Palaeozoic marine sediments. Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail, leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments. In this study, we present seismic tomography data from ocean bottom seismogra...     

华北克拉通东部地壳与地幔盖层结构——长观测距深地震测深剖面结果

利用文登—阿拉善左旗长观测距地震宽角反射/折射剖面东段资料,辩识出4组地壳震相和3组地幔盖层震相.采用二维射线追踪走时反演和正演拟合交替计算方法,得到了包括鲁东隆起和华北裂陷盆地在内的地壳和地幔盖层二维速度结构.研究结果表明:华北裂陷盆地基底深达6km以上,研究区壳内界面C1埋深约15km,C2界面深约25km,Moho面平均埋深约35km.上地壳速度6.0~6.1km·s-1,且横向变化较大;中地壳速度相对均匀约为6.2~6.4km·s-1;下地壳速度为6.5~7.0km·s-1,速度梯度较大.地壳平均速度与隆起和坳陷构造相关.研究区岩石圈底界面一般为75~80km,西端接近太行隆起构造时深至90km左右,向西呈明显加深趋势,地壳厚度呈现相同的增厚特征.地幔盖层上部速度8.0~8.2km·s-1,具明显正梯度特征.岩石圈平均速度在郯庐断裂带附近显著偏低.PmP和PLP震相存在不同程度的复杂性,意味着在本地区Moho界面和岩石圈界面有较为复杂的结构,可能具有一定厚度或过渡带性质.结合其他研究结果认为,地幔盖层和下地壳速度梯度、界面性质差异与华北克拉通破坏相关,意味着破坏是一个渐变、缓慢和不均匀的过程.郯庐断裂带附近的低速应是其为软弱带的证据.