Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.     

Stress‐dependent hardening and failure surfaces of dry sand

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.     

用内蕴时间理论进行土流变本构方程研究

利用内蕴时间理论对土的流变性进行了理论研究。提出了在准三轴条件下土的流变本构方程 ,并且利用土的三轴流变试验结果对所得土流变本构方程进行了验证。验证结果表明用内蕴时间理论推导的土流变本构方程能很准确地描述土的流变性。     

低速体与深浅断裂共同孕震过程的数值模拟初步研究

利用含劈节点黏弹性三维有限单元计算方法 ,对由地球物理探测结果提出的华北地区强震孕育物理模型进行了数值模拟分析 ,进而 ,在利用GPS资料反演计算首都圈地区断裂活动性的基础上 ,对首都圈三维区域应力场和能量的演化进行了模拟计算 ,并提出了强震危险区和震级上限预测意见     

A generalized model for geosynthetic reinforced railway tracks resting on soft clays

The present study pertains to the development of a foundation model for predicting the behavior of geosynthetic reinforcement railway track system rested on soft clay subgrade. The ballast and sub‐ballast layers have been idealized by Pasternak shear layer. The geosynthetic layer is represented by a stretched rough elastic membrane. Burger model has been used to characterize the soft clay subgrade. Numerical solutions have been obtained by adopting the finite difference scheme combined with non‐dimensioning the governing equations of the proposed model. The results confirm that the present model is quite capable of predicting the time‐dependent settlement response of geosynthetic reinforcement railway track system placed on soft clay subgrade. The surface settlement profile and mobilized tensile load of geosynthetics has been evaluated by considering variation in the wheel load, sleeper width, thickness of ballast and sub‐ballast layers and shear modulus of ballast and sub‐ballast layers. It has been observed that an increase in the sleeper width by 24% results in the reduction in central settlement and mobilized tensile load by 6.5% and 20.1%, respectively. It was found that with a 50% increase in the thickness of the ballast layer, the central settlement has decreased by 7.3% and the mobilized tension at the zone of maximum curvature has increased by 24.6%. However, with an increase in the thickness of the sub‐ballast layer, a considerable reduction in both central settlement and the mobilization of tension on geosynthetic has been noticed. The pattern of variation of settlement and mobilized tension for an increase in the shear modulus of ballast and sub‐ballast material was found to be almost similar. Copyright © 2014 John Wiley & Sons, Ltd.     

考虑围岩流变特性的地震尖点型突变模型

考虑到断层两盘围岩的粘弹性和断层的应变弱化,建立了断层地震的简化力学模型,首先证明了该模型对应于尖点突变,后利用尖点突变理论研究地震的非稳定机制,阐明只有当外界对系统输入足够的能量,且刚度比小于１时,系统内的能量才能迅地转移与释放,引起地震。而孕震时间既与远场位 关又与围岩的粘弹性性质有关。     

Visco‐elastic load transfer models for axially loaded piles

Viscoelastic or creep behaviour can have a significant influence on the load transfer (t–z) response at the pile–soil interface, and thus on the pile load settlement relationship. Many experimental and theoretical models for pile load transfer behaviour have been presented. However, none of these has led to a closed‐form expression which captures both non‐linearity and viscoelastic behaviour of the soil. In this paper, non‐linear viscoelastic shaft and base load transfer (t–z) models are presented, based on integration of a generalized viscoelastic stress–strain model for the soil. The resulting shaft model is verified through published field and laboratory test data. With these models, the previous closed‐form solutions evolved for a pile in a non‐homogeneous media have been readily extended to account for visco‐elastic response. For 1‐step loading case, the closed‐form predictions have been verified extensively with previous more rigorous numerical analysis, and with the new GASPILE program analysis. Parametric studies on two kinds of commonly encountered loading: step loading, ramp (linear increase followed by sustained) loading have been performed. Two examples of the prediction of the effects of creep on the load settlement relationship by the solutions and the program GASPILE, have been presented. Copyright © 2000 John Wiley & Sons, Ltd.     

软土地基上填土桥坡工后沉降三维有限元研究

采用适用于上海饱和软土的非线性粘弹塑性模型, 研制了三维有限元软件。 应用该软件对软土地基上填土桥坡的工后沉降进行了三维有限元研究, 并将计算值与实测结果作了比较, 认为软土路基的蠕变效应是造成桥坡工后沉降的主要因素。     

Analytical study of mine closure behaviour in a poro‐visco‐elastic medium

This paper is interested in the hydro‐mechanical behaviour of an underground cavity abandoned at the end of its service life. It is an extension of a previous study that accounted for a poro‐elastic behaviour of the rock mass (Int. J. Comput. Geomech. 2007; DOI: 10.1016/j.compgeo.2007.11.003 ). Deterioration of the lining support with time leads to the transfer of the loading from the exterior massif to the interior backfill. The in situ material has a poro‐visco‐elastic constitutive behaviour while the backfill is poro‐elastic, both saturated with water. This loading transfer is accompanied by an inward cavity convergence, thereby compressing the backfill, and induces an outward water flow. This leads to a complex space–time evolution of pore pressures, displacements and stresses, which is not always intuitive. In its general setting, a semi‐explicit solution to this problem is developed, using Laplace transform, the inversion being performed numerically. Analytical inversion leading to a quasi‐explicit solution in the time domain is possible by identifying the characteristic creep and relaxation times of volumetric strains with those of the deviatoric strains, on the basis of a parametric study. A few numerical examples are given to illustrate the hydro‐mechanical behaviour of the cavity and highlight the influence of key parameters (e.g. stiffness of backfill, lining deterioration rate, etc.). Further studies accounting for more general material behaviours for the backfill and external ground are ongoing. Copyright © 2008 John Wiley & Sons, Ltd.