褶皱岩层初始挠曲的分叉特性

基于拖带坐标法建立了岩层大变形的一维非线性微分方程，然后用解析与数值方法研究了变刚度、可伸缩岩层在侧向压力及自重作用下的分叉特性，初步揭示了褶皱岩层初始挠曲的形成机理。     

流褶层及韧变带研究

流褶层与韧变带是地壳拉伸变形，顺层固态流变作用下的产物。流褶层是以原始层理为变形面或再经递进变形的褶皱变形岩层或岩石共生组合层位。韧变带具明显的层控性，受岩石成分和应变程度控制，不同环境和不同成分岩石的韧变带具有相异的组合型式和变形机制，井具有一定的递变规律。流褶层和韧变带可分属不同层位，但流褶层可实现向韧变带的转化。     

Experimental decipherment of the soft-sediment deformation observed in the upper part of the Talchir Formation (Lower Permian), Jharia Basin, India

Four types of soft-sediment folds of distinct geometry can be recognized in the upper part of the Talchir Formation (Lower Permian) of Jharia Basin, India. These folds, on systematic examination, indicate some events of progressive deformation. Experimental study reveals that if a layered stack of clay and overlying sand is allowed to flow slowly down a slope, differential velocity due to viscosity contrast leads to the deformation of the rheologic interface. The sharp planar contact gradually becomes wavy leading to the development of round-hinged folds involving sediments adjacent to it. With the advancement of the flow these folds gradually become overturned with the rotation of the axial plane in the direction of flow. Computer simulation suggests that progressive deformation of these folds by simple shearing may lead to the formation of tight isoclinal folds, which on dislocation along intrastratal normal faults may lead to the development of rootless isoclinal folds. The sheath folds observed in the studied section also indicate accentuation of the curved hinge due to simple shearing. The spatial distribution of these fold types in conjunction with the inferred direction of progressive deformation indicate basinward translation of the slump slice. If the same stack of sediments rapidly flows down the slope, the waveform generated at the interface quickly breaks in the form of roll-up recumbent fold due to Kelvin–Helmholtz instability.     

Determination of the Critical Value of Deflection for Embedded Cylindrical Structures

An embedded cylinder is a large-diameter cylinder embedded in a soil foundation. The state of failure of such an embedded cylindrical structure shows large deflection instead of slide and overturn of the traditional gravity type of structure placed on a rubble base or foundation base. The critical value of deflection of the embedded cylindrical structure, which is the maximum allowable deflection for stability calculation of the cylinder, is a vital control value. Through investigation on deflection and soil pressures on an embedded cylinder by model experiments, the variations of the angle of rotation θ of a cylinder with effective anti-overturning ratio η and moment MH of thrust are discussed. On the basis of experimental study, the critical value of deflection of the cylindrical structure is proposed in the paper. Meanwhile, the formulas for calculating deflection of cylinders are derived.     

Fault Characteristics in Longmen Mountain Thrust Belt,Western Sichuan Foreland Basin,China

Through field geological survey,the authors found that abundant thrust faults developed in the Longmen (龙门) Mountain thrust belt.These faults can be divided into thrust faults and strike-slip faults according to their formation mechanisms and characteristics.Furthermore,these faults can be graded into primary fault,secondary fault,third-level fault,and fourth-level fault according to their scale and role in the tectonic evolution of Longmen Mountain thrust belt.Each thrust fault is composed of several secondary faults,such as Qingchuan (青川)-Maowen (茂汶) fault zone is composed of Qiaozhuang (乔庄) fault,Qingxi (青溪) fault,Maowen fault,Ganyanggou (赶羊沟) fault,etc..The Longmen Mountain thrust belt experienced early Indosinian movement,Anxian (安县) movement,Yanshan (燕山)movement,and Himalayan movement,and the faults formed gradually from north to south.     

The Glarus thrust: excursion guide and report of a field trip of the Swiss Tectonic Studies Group (Swiss Geological Society, 14.–16. 09. 2006)

This excursion guide results form a field trip to the Glarus nappe complex organized by the Swiss Tectonic Studies Group in 2006. The aim of the excursion was to discuss old and recent concepts related to the evolution of the Glarus thrust. The major aspects were (i) the interplay between deformation, fluid flow and geochemical alteration, (ii) episodic versus continuous deformation and fluid flow, and (iii) the link between large-scale structures, microstructures, and geochemical aspects. Despite 150 years of research in the Glarus nappe complex and the new results discussed during the excursion, there exist controversies that still are unsolved.     

北武夷地区逆冲推覆构造的特征及其控矿作用

北武夷地区成矿地质条件优越,矿产资源分布广泛,而广泛发育的推覆构造深刻影响着矿床的成生与保存。区域性推覆构造是成矿前、成矿期还是成矿后的构造,其精细结构特征如何,是否具有控岩控矿作用,如果是破矿作用,是否造成矿体重复增大或者隐伏、缺失等问题,严重影响着地质找矿的效果。建议开展面积性、追索性的路线地质调查,查明逆冲推覆构造的区域分布、不同单元的产状、构造样式,分别采用40Ar-39Ar和Re-Os定年技术测定推覆构造和矿体的形成时代,结合定量化分析及精细构造解析,研究构造与矿床的成生联系,预测隐伏矿体可能的位置,进而为北武夷地区寻找隐伏矿床和扩大矿床远景提供参考。     

单侯井田构造发育规律及其对煤层开采的影响

从区域构造入手,对单侯井田构造进行分析,认为井田内断层发育以走向NW—NE、落差≤5m的小型正断层为主,且主要分布于大中型构造的两侧．特别是在其弧形转折带附近往往形成“羽”状雁列的小断层密集带。断层垂向上多分布于4—7号煤层之间的厚煤层发育区,其严重破坏了煤层的连续及完整性,是影响煤层开采的最主要因素之一。井田褶皱构造相对不发育,以短轴小型背、向斜为主,均属缓波状褶曲,对煤层的开采无影响或影响较小。根据井田地质构造发育程度,对其进行预测及分区评价：井田东部为强烈的构造挤压带,以发育走向NW-近EW—NE向的大型逆掩断层为特点,构造最复杂;井田西北部是相对较轻微的构造挤压带,以发育走向NE向的逆断层为特征,构造较复杂;井田南部以发育近SN或NNW向正断层为主,构造相对简单。评价结果对矿井设计及采区与工作面布置有一定的指导作用。     

山西大同口泉山隆升-挠褶构造研究

挠曲褶皱构造在山西广泛存在,大同市之西盆地边缘"口泉山断裂带"实际是一个大型挠褶构造带。以往的研究者仅把它当成几个断裂分段研究。认识和研究挠褶构造不仅能够在理论上取得进展,而且还能够指导煤矿勘探和开采,取得很好的经济效益。通过构造带上几个地方典型构造现象的研究得出,该构造带构造现象虽然复杂,但它并不是杂乱无章的,运用挠褶构造的理论上能够恢复它的原始形态以及它的发生发展的全过程。挠褶构造的形成与构造块体的隆升有关,其形成为:地幔柱隆升-地层上拱-挠褶-冲断走滑等。     

山西天池煤矿构造特征及其形成机制

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。