A Preliminary Study of Shear Wave in Seafloor Surface Sediments

This article preliminarily reports and analyses the transmission characteristics and behaviors of shear wave in the offshore seafloor surface sediments in China, discusses the relationships between the physical and mechanical features of the shear wave and the compression wave, and compares the testing results with that of Hamilton and Chen et al. The result shows that the shear wave can be tested if the seafloor surface sediment has tangent modulus. The shear wave velocity ranges from 50-600 m/s and the measuring frequency from 50-200 kHz. The sound velocity rate of shear wave and compression wave can be used to appraise the stress-strain feature of seafloor surface sediments. This study provides a basis for further describing and appraising the seafloor sedimentary acoustic-mechanical feature and building a geological-acoustic model on China's offshore sea area.     

电容测试法判断测井电缆系统故障

测井电缆因长途颠簸、拉伸及绞车缠绕挤压,电缆连接器、电缆、绞车滑环、滑环连线等部位极易出现故障。电容测试法是一种简易、快速的检测方法,该法可在现场准确诊断出故障电缆的位置。以四芯铠装电缆为例,每根缆芯的正常阻值约为80Ω/1 000m,两缆芯间的分布电容约为170PPF/1 000m。在实际检测中,根据电容较小时测点的位置,可以有效判断故障部位;而电缆故障位置则可利用电阻及电容的线性关系进行计算予以确定。     

Timing effects on the fragmentation of small scale blocks of granodiorite

A series of small scale tests, simulating multi-hole blasts have been performed to establish the effect of delays on blast fragmentation. The blasts were performed in high quality granodiorite blocks, which were cut from stone prepared by dimensional stone quarry operations. The pattern used was equilateral triangular, with a distance of 10.2 cm between boreholes, which had a diameter of 11 mm, were loaded with detonating cord and the coupling medium was water. The delays used were achieved using different lengths of detonating cord for the cases of delays between 0 and 100 μs between holes and a sequential blasting machine firing seismic detonators for larger delays up to 4 ms. All fragments were collected and screened. The experiments showed that the worst fragmentation was achieved with simultaneous initiation of all charges. Fragmentation improved with the delay time between holes up to 1 ms between holes. If the experiments are scaled up, the results show that in granodiorite, fragmentation optimization requires delays of few milliseconds per metre of burden. The findings, agree with previously published work, involving larger scale experiments and other rock types.     

路用探地雷达的应用技术研究进展

有效、无损、快捷、简便是公路检测技术发展的方向，当前国内外先进的浅层勘探技术——路用探地雷达检测，以其无损、快捷以及浅层高分辨率的优势被迅速应用于公路检测。本文对近年来路用探地雷达技术的发展及应用情况进行了介绍，详细分析了探地雷达的工作原理、系统组成结构。就探地雷达在公路建设、维护过程中的应用情况进行了系统总结。     

碎石桩加固冷却塔地基效果的检测技术与质量评价

介绍了安阳电厂冷却塔碎石桩复合地基静载、动力触探、瑞利波法系列原位试验。根据试验结果，对冷却塔地基加固与改良效果及施工质量进行了评价。     

宽级配砂土基料-滤层系统的室内模型试验研究

基料一滤层利用数码可视化跟踪技术、计算机信息实时处理技术和土体变形无标点量测技术,对宽级配基料一滤层系统进行了渗透室内模型试验。探讨了滤层准则的适用性,研究了不同滤层厚度和加压速率对管涌发生发展的影响。结果表明：传统太沙基滤层准则不适用于宽级配砂土,建议采用可移动颗粒中的d85s进行滤层准则设计;增加滤层厚度可提高系统的抗渗透破坏能力,但提高滤层厚度对提高整个系统抵抗渗透能力作用不大;水力梯度增加较快不利于系统的稳定。     

PHC桩穿越深厚密实砂层可打性分析及现场试验研究

由于PHC桩经在穿越深厚砂层过程中常造成桩头、桩身疲劳破坏,从而无法沉桩至设计标高。为综合分析此类工况下PHC桩的可打性,本文通过GRLWEAP软件对穿越深厚密实砂层工况的PHC桩进行打桩波动方程模拟,同时在工程现场开展高应变打桩监测试验。研究发现PHC桩穿越深厚密实砂层除了需要选择合理的打桩系统和打桩工艺外,还须采用引孔措施以及对桩身和桩靴进行必要的加强处理。为穿越深厚密实砂层工况下选用PHC桩的设计和施工提供了科学依据。     

基于动力触探的砾性土液化判别方法通用性研究

能量传递率是衡量贯入类试验锤击效率的一个重要指标。国外对这一指标需要进行现场实测,进而修正贯入试验的锤击数,建立评价场地承载力、液化势等特性的标准化锤击数。国内规范中,则较少考虑贯入试验的锤击能量传递率的问题,且缺少现场试验测试数据,导致基于贯入类试验锤击数的地基评价方法难以与国外标准进行横向对比。为解决这一问题,选取川滇地区西昌地震实验场的3个勘察试验点。采用能量测试仪实测标准贯入试验能量传递率,研究我国常规SPT试验装置锤击效率,并评价其稳定性。试验实测结果显示,现场标准贯入试验的锤击能量传递率均值基本超过75%。能量传递率随着贯入深度的增加稍有增加,地表下20 m范围内增长幅值为10%左右。试验结果可为评价我国常规SPT试验设备的锤击效率提供依据。     

Shake table testing of a multi-tower connected hybrid structure

Many single-tower reinforced concrete core wall-steel frame (RCC-SF) buildings have been built in China, but there are no buildings of different-height multi-tower hybrid system. A multi-tower RCC-SF tall building was thus studied because of its structural complexity and irregularity. First, a 1/15 scaled model structure was designed and tested on the shake table under minor, moderate, and major earthquake levels. Then, the dynamic responses of the model structure were interpreted to those of the prototype structure according to the similitude theory. Experimental results demonstrate that, despite the complexity of the structure, the lateral deformation bends as the "bending type" and the RC core walls contribute more than the steel frames to resist seismic loads. The maximum inter-story drift of the complex building under minor earthquakes is slightly beyond the elastic limitation specified in the Chinese code, and meets code requirements under major earthquakes. From the test results some suggestions are provided that could contribute favorable effect on the seismic behavior and the displacement of the building.     

内蒙古金厂沟梁金矿床成矿流体特征及稳定同位素研究

对金厂沟梁金矿床含金石英脉中流体包裹体进行了岩相学、显微测温、单个包裹体的激光拉曼测试以及O和S同位素组成等方面研究。结果表明,成矿流体气相成分主要为H2 O,属H2 O-NaCl体系,包裹体均一温度为148.7℃～352℃,盐度[ w （ NaCl ）/％]为1.05％～5.99％。δ18 O值为-1.1‰～3.0‰,说明成矿流体继承了变质流体的特征,仍以岩浆水和后期大气降水为主;δ34 SV-CDT组成为0.6‰～4.3‰,平均值0.817‰,极差为3.1‰,表明成矿流体中的硫主要来自于幔源,其次为围岩。综合分析认为,金厂沟梁金矿床是在燕山晚期太平洋板块俯冲导致岩石圈的快速减薄、拆沉的拉张环境下形成的浅成造山型金矿。