Impact of the sampling duration on the uncertainty of averaged velocity measurements with acoustic instruments

Average velocity in streams is a key variable for the analysis and modelling of hydrological and hydraulic processes underpinning water resources science and practice. The present study evaluates the impact of the sampling duration on the quality of average velocity measurements acquired with contemporary instruments such as Acoustic Doppler Velocimeters (ADV) an Acoustic Doppler Current Profilers (ADCP). The evaluation combines considerations on turbulent flows and principles and configurations of acoustic instruments with practical experience in conducting customized analysis for uncertainty analysis purposes. The study sheds new insights on the spatial and temporal variability of the uncertainty in the measurement of average velocities due to variable sampling durations acting in isolation from other sources of uncertainties. Sampling durations of 90 and 150 s are found sufficient for ADV and ADCP, respectively, to obtain reliable average velocities in a flow affected only by natural turbulence and instrument noise. Larger sampling durations are needed for measurements in most of the natural streams exposed to additional sources of data variability.     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

暴雨时程方程在中吉乌铁路(中国段)暴雨估算中的应用

根据中吉乌铁路（中国段）沿线10多个气象水文观测站40多年（建站至2000年）各历时最大降水量资料，对中吉乌铁路（中国段）暴雨强度进行系统的研究。应用熵气象学导出的暴雨时程方程，预测了中吉乌铁路（中国段）各历时最大降水量。这对于中吉乌铁路（中国段）工程设计和施工及未来铁路客运等具有重要的科学意义和工程价值。     

Timing of Fracture Formation and Duration of Mineralization at the Hishikari Deposit, Southern Kyushu, Japan

Abstract. The Hishikari epithermal gold deposit consists of the Honko-Sanjin zone and Yamada zone. On the basis of observed crosscutting relationships of veins, vein system in the Hishikari deposit was classified into the early and late veins. They differ from orientation, width, control by unconformity, the amount of displacement and structural features, but have similarity in gold grade and Au/Ag ratios. K-Ar ages are presented for the classified veins to clarify timing of fracturing and duration of mineralization.
Age determination revealed that the early veins in the Honko-Sanjin zone range from 0.86 to 1.11 Ma and that the late veins range from 0.73 to 0. 84 Ma. The economically most important mineralization in the Hishikari deposit occurred around 0.90 Ma in a very short period (about 0.05 million years).
The distribution of mineralization age in the whole Hishikari deposit, occurrences of slickensides and ground water temperatures imply that mineralization lasted longer in the southern part of the deposit. As compared the early veins with late veins, structural changes including width, strike, dip and vein characteristics occurred at around 0.85 Ma.     

Relationships between climatic factors and flower and boll production in Egyptian cotton (Gossypium barbadense)

Fruiting of cotton plant is determined and influenced by cultivar, climatic conditions, management practices and pests. An understanding of the flowering and boll retention patterns of cotton cultivars can contribute to more efficient and economical crop management. The objective of this investigation was to study the effect of various climatic factors on flower and boll production of Egyptian cotton. This could be used in formulating advanced predictions of the effect of certain climatic conditions on the production of Egyptian cotton. Two uniform field trials, using cotton Gossypium barbadense cv. Giza 75 were carried out in 1992 and 1993 at the Agricultural Research Station, Agricultural Research Center, Ministry of Agriculture, Giza, Egypt, to investigate the relationships between climatic factors, flower and boll production. Climatic factors included maximum and minimum air temperatures along with their difference, evaporation, surface soil temperature (grass temperature or green cover temperature) at 0600 and 1800 h°C⁻¹, sunshine duration, maximum and minimum humidity and wind speed. The effects of climatic factors on flower and boll production were quantified in the absence of water and nutritional deficits and damage effects of insects. Results obtained indicate that evaporation, sunshine duration, humidity, surface soil temperature at 1800 h, and maximum air temperature, were the important climatic factors that significantly affect flower and boll production of Egyptian cotton. Consequently, applying appropriate specific cultural practices that minimize the deleterious effect of these factors will lead to an improvement in cotton yield.     

Early Estimation of Strong Aftershock Duration Time

In order to solve the problem of early estimation of moderately strong aftershock duration time in an earthquake sequence,this study has been conducted.First,the definition of the strong aftershock has been given.It is pointed out that there is a difference in the strong aftershock duration time between the main shock type sequence and the strong earthquake swarm sequence.After dividing the three cases,i.e.,a strong aftershock duration time larger than 1 day,smaller than 1 day,and no strong aftershock occurred in a main shock type sequence by using the pattern recognition method,we gave the rough correlation relation between strong aftershock duration time and first large shock magnitude for two types of sequences.Finally,the judgment index and method of estimating strong aftershock duration times for different sequence types have been given.     

The effective number of cycles of earthquake ground motion

The seismic response of any system that accumulates damage under cyclic loading is dependent not only on the maximum amplitude of the motion but also its duration. This is explicitly recognized in methods for estimating the liquefaction potential of soil deposits. Many researchers have proposed that the effective number of cycles of the ground motion is a more robust indicator of the destructive capacity of the shaking than the duration. However, as is the case with strong‐motion duration, there is no universally accepted approach to determining the effective number of cycles of motion, and the different methods that have been proposed can give widely varying results for a particular accelerogram. Definitions of the effective number of cycles of motion are reviewed, classified and compared. Measurements are found to differ particularly for accelerograms with broad‐banded frequency content, which contain a significant number of non‐zero crossing peaks. The key seismological parameters influencing the number of cycles of motion and associated equations for predicting this quantity for future earthquakes are identified. Correlations between cycle counts and different duration measures are explored and found to be rather poor in the absence of additional parameters. Copyright © 2004 John Wiley & Sons, Ltd.     

Fingerprinting the 8.2 ka event climate response in a coupled climate model

Using results from coupled climate model simulations of the 8.2 ka climate event that produced a cold period over Greenland in agreement with the reconstructed cooling from ice cores, we investigate the typical pattern of climate anomalies (fingerprint) to provide a framework for the interpretation of global proxy data for the 8.2 ka climate event. For this purpose we developed an analysis method that isolates the forced temperature response and provides information on spatial variations in magnitude, timing and duration that characterise the detectable climate event in proxy archives. Our analysis shows that delays in the temperature response to the freshwater forcing are present, mostly in the order of decades (30 a over central Greenland). The North Atlantic Ocean initially cools in response to the freshwater perturbation, followed in certain parts by a warm response. This delay, occurring more than 200 a after the freshwater pulse, hints at an overshoot in the recovery from the freshwater perturbation. The South Atlantic and the Southern Ocean show a warm response reflecting the bipolar seesaw effect. The duration of the simulated event varies for different areas, and the highest probability of recording the event in proxy archives is in the North Atlantic Ocean area north of 40° N. Our results may facilitate the interpretation of proxy archives recording the 8.2 ka event, as they show that timing and duration cannot be assumed to correspond with the timing and duration of the event as recorded in Greenland ice cores. Copyright © 2011 John Wiley & Sons, Ltd.     

新疆哈密地区近54a日照时数的均一性分析及其影响因素

以新疆哈密地区1961-2014年6个气象观测站地面气象观测资料为依据,利用线性趋势分析、相关性分析、M-K突变检验分析等方法,对哈密地区近54a四季及年平均日照时数的变化趋势、异常年份、突变检验及影响因子进行分析,得出以下结论：近54a哈密地区春季与年平均日照时数均呈上升趋势,而夏、秋、冬季变化比较平稳;年日照时数异常偏少出现在1998年,但从未出现过异常偏多年;年日照时数在1973年和2008年发生两次突变,减少、增加趋势不显著;年、春季日照时数增加与低云量的减少关系密切。