东营城区高精度三维地震采集方法研究

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

浅层SH反射波法和多道瞬态面波法 进行联合工程勘察的讨论

针对目前单一工程物探方法调查浅部地质结构的局限性,提出采用弹性波法勘察中研究浅部地质结构的SH波反射勘察和多道瞬态面波法勘察这2种有效手段进行联合勘探,提高其可靠性和精度,并给出了3个实例,指出了在数据采集和处理时应注意的问题。     

漾濞地震震源位置分析

采用一致的地震震相和台网布局，应用昆明数字地震台网资料，对2002年月1月4日－1月7日的漾濞地震及序列作进一步核定，得出了更精确的地震震源位置，并作出三维空间图。     

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.     

公婆泉盆地局部排泄源氧化还原属性与铀矿化关系探讨

在系统分析公婆泉盆地地质背景、水文地质条件的基础上，对该区局部排泄源氧化还原属性与铀矿化的关系进行了探讨。研究结果表明，局部排泄源的存在对铀矿化具有重要作用，当局部排泄源属于还原性质时，铀矿体常常分布于该排泄源上游；若属氧化性质，排泄源铀矿体通常位于其下游或附近。公婆泉盆地存在相对氧化和相对还原的二种局部排泄源，北骆驼泉区的沙泉沟与平沙地、麻黄沟、北骆驼泉沟排泄源之间应为有利的铀矿化地段。     

Changes in source parameters of foreshocks and aftershocks of the 2001 M_S=6.0 Yajiang, Sichuan, earthquake

Introduction An MS=6.0 earthquake occurred on February 23, 2001 in Yajiang county, Sichuan Province. The earthquake is located on the east of the southeast segment of the Litang-Dewu fault with strike of NW. Before the event, on February 14, an MS=5.0 earthquake took place nearly in the same place. In 1948 an MS=7.3 earthquake occurred on the northwestern segment of the Litang fault. The length of the surface rupture belt caused by the earthquake is 70 km, which extended from Litang to…     

Magnetotelluric Investigation of the Hydrothermal System and Heat Source in the Muine-Toyoha Geothermal Area, Hokkaido, Japan

Abstract. Magnetotelluric (MT) surveys were carried out around the Muine volcano, Hokkaido, Japan, where it is expected that the heat and metal source forming the polymetallic Ag-Pb-Zn-Cu-In Toyoha deposit is present at depth. Measurements were performed at 20 sites, 18 of which were located along a WSW-ENE profile traversing the north ridge of Mt. Muine. A resistivity model obtained from 2D inversion of the MT data shows subsurface specific conductive and resistive features. Conductive layers are present at the surface of Mt. Muine. The low resistivity is probably due to the clay-rich rocks associated with the hydrothermal alteration. A high resistivity layer, which corresponds to the pre-Tertiary Usubetsu Formation, crops out east of Mt. Muine and dips westward. At the west foot of Mt. Muine, relatively high resistive layers are widely exposed. The resistivity increases with depth and exceeds 1000 ohm-m. This fact indicates that this region is not influenced by the recent hydrothermal activity. An extremely conductive zone about 3–6 km wide and 6–9 km thick exists at a depth of 2 km below Mt. Muine. This zone mostly corresponds to an elastic wave attenuation zone detected by a seismic survey. It is interpreted as a large hydrothermal reservoir or melted magma, which is a heat source of the hydrothermal system in this area.