Determination of subcatchment and watershed boundaries in a complex and highly urbanized landscape

Urban development significantly alters the landscape by introducing widespread impervious surfaces, which quickly convey surface run‐off to streams via stormwater sewer networks, resulting in “flashy” hydrological responses. Here, we present the inadequacies of using raster‐based digital elevation models and flow‐direction algorithms to delineate large and highly urbanized watersheds and propose an alternative approach that accounts for the influence of anthropogenically modified land cover. We use a semi‐automated approach that incorporates conventional drainage networks into overland flow paths and define the maximal run‐off contributing area. In this approach, stormwater pipes are clustered according to their slope attributes, which define flow direction. Land areas drained by each cluster and contributing (or exporting) flow to a topographically delineated catchment were determined. These land masses were subsequently added or removed from the catchment, modifying both the shape and the size. Our results in a highly urbanized Toronto, Canada, area watershed indicate a moderate net increase in the directly connected watershed area by 3% relative to a topographically forced method; however, differences across three smaller scale subcatchments are greater. Compared to topographic delineation, the directly connected watershed areas of both the upper and middle subcatchments decrease by 5% and 8%, respectively, whereas the lower subcatchment area increases by 15%. This is directly related to subsurface storm sewer pipes that cross topographic boundaries. When directly connected subcatchment area is plotted against total streamflow and flashiness indices using this method, the coefficients of variation are greater (0.93 to 0.97) compared to the use of digital elevation model‐derived subcatchment areas (0.78 to 0.85). The accurate identification of watershed and subcatchment boundaries should incorporate ancillary data such as stormwater sewer networks and retention basin drainage areas to reduce water budget errors in urban systems.     

景观生态分类与制图浅议

本文在查阅分析大量文献和前人研究的基础上 ,对目前景观生态分类和景观制图作了详细的对比分析 ,认为景观分类需要结合实际区域现状 ,采用逐级分类的方法 ;同时利用 ETM遥感影像为数据源 ,以天山北麓为示范区.研制其土地利用土地覆盖变化的景观类型图。     

平衡剖面的制作流程及其地质意义

平衡剖面技术是地质思维和计算机技术的结晶,使对断层构造的研究提高到定量阶段,其依据是在垂直构造走向的剖面上,地层长度和面积(2D)或体积(3D)是均衡的。在此原理基础上利用数学手段对盆地的构造发育史进行正演和反演模拟,直观地再现地下构造的原始几何形态,迅速提供地震剖面的构造解释方案,并对解释结果进行检验(不平衡的剖面其解释一般有问题),为深刻认识构造发育史、分析油气运移及聚集规律提供依据,提高了工作效率。其结果也为盆地模拟、油藏模拟、定量计算构造伸缩量等地质研究打下了坚实的基础[1]。     

Gamma-Hadron Separation using Čerenkov Photon Density Fluctuations

In the atmospheric Čerenkov technique γ-rays are detected against the abundant background produced by hadronic showers. In order to improve the signal to noise ratio of theexperiment, it is necessary to reject a significant fraction of hadronic showers. Traditional background rejection methods based on image shape parameters have been extensively used for the data from imaging telescopes. However, non-imaging Čerenkov telescopes have to develop very different means of statistically identifying and removing cosmic ray events. Some of the parameters, which could be potentially important for non-imaging arrays, are the temporal and spectral differences, the lateral distributions and density fluctuations of Čerenkov photons generated by γ-ray and hadron primaries. Here we study the differences in fluctuations of Čerenkov photon density in the light pool at the observation level from showers initiated by photons and those initiated by protons or heavier nuclei. The database of simulated events for the PACT array has been used to evaluate the efficiency of the new technique. Various types of density fluctuations like the short range and medium range fluctuations as well as flatness parameter are studied. The estimated quality factors reflect the efficiencies with which the hadrons can be rejected from the data. Since some of these parameters are independent, the cuts may be applied in tandem and we demonstrate that the proton rejection efficiency of ∼90% can be achieved. Use of density fluctuations is particularly suited for wavefront sampling observations and it seems to be a good technique to improve the signal to noise ratio. This revised version was published online in July 2006 with corrections to the Cover Date.     

低轨道人造卫星(CHAMP、GRACE、GOCE)与高精度地球重力场——卫星重力大地测量的最新发展及其对地球科学的重大影响

评述了卫星重力大地测量的最新发展及其对地球科学的重大影响。为了更好地理解地球内部物理构造与海洋动力学，以及大陆，冰川和海洋的相互作用，改善现有地球重力场模型（包括精度和空间解析度）是非常重要的。IUGG等国际组织对此已经强调了很多年。最近，由德国的GFZ（GeoForschungsZentrum)，美国的NASA（National Aeronautics and Space Adminitration)以及欧洲宇航局ESA（European Space Agency)开发研制了最先进的地球监测技术－SST（Satellite-to-Sateilite Tracking)。其主要特点是利用现有的GPS连续追踪新发射低轨道卫星，并由低轨道卫星对地球重力场作精密观测。已经发射和即将发射的卫星有3颗：GHAMP（Challenging Mini-Satellite Payload for Geophysical Research an Application)已经于2000年发射；GRACE（Gravity Recovery and Climate Experimert)定于2002年发射；GOCE（Gravity Field and Steady-state Ocean Cirulation Explorer)计划2004年发射，它们可以统称为重力卫星。载有SST技术的人造卫星的主要目的是获得具有前所未有的高精度和高空间解析度的全球重力场和大地水准面模型，加强人们对地球内部构造的理解并为海洋和气象研究提供更好地参考。上述3个重力卫星工作在有明显区别的不同波谱内，它们有不同的科学应用，仅有一小部分重合。所以，就应用而言它们是完全互补的。它们在地球科学中的应用将是广泛的，特别对于固体地球物理学，海洋学以及大地测量学等领域，它们将会带来革命性的变化，其意义不亚于GPS。     

南山站对陆地—5号资源卫星的可观测范围及以该站为中心的覆盖区域

本文简要介绍了陆地系列地球资源卫星的轨道特征，并以陆地—５号资源卫星为例，根据南山站的座标计算出该站对陆地—５号资源卫星的可观测范围及以该站为中心的卫星的覆盖区域。     

GDJ人卫目视观测数据采集和处理系统的研制

本文介绍了ＧＤＪ跟踪打印经纬仪在人造卫星的观测中如何应用计算机对多圈卫星的目视观测资料进行实时采集、处理等工作过程的原理和方法。     

中国1∶100万景观生态制图设计

中国1∶100万景观生态图系借鉴国内外传统景观制图方法和制图规范,在遥感、地理信息系统先进技术的支持下,设计研制其制图方法、制图内容、样图和技术流程,同时提出初步的景观分类系统,为今后编制中国1∶100万景观生态图奠定基础。     

GEOGRAPHY ON THE PLANETS: GIFT OF REMOTE SENSING*

Extraterrestrial geography has become a reality, as we move from Earth's moon to the planets. A broad-scale regional physiography is being established on twenty planets and satellites through remote sensing techniques. Spacecraft images yield most of the information on Solar System landscapes. Topographic measurements are extracted by monoscopic image-processing, stereophotogrammetry, and radar analysis. Invisible parts of the spectrum furnish non-topographic data.