Multiple longshore sand bars in the upper Chesapeake Bay

In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism.     

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

The characteristics of Asian dust events in Northeast Asia during the springtime from 1993 to 2004

The characteristics of Asian dust events that occurred in Northeast Asia during the springtime from 1993 to 2004 are investigated using 3-hourly SYNOP reports (World Meteorological Organization). Occurrences of blowing sand and dust storm are low in 1997 and 1999, but have increased rapidly since 2000. The maximum occurrence was recorded in 2002. Wind velocity of 6.5 m s^− 1 as a threshold wind velocity is not so exactly consistent with the occurrence of blowing sand. However, wind velocity of 14 m s^− 1 as a strong wind causing dust storm had similar tendency to those of dust storm and Dust Storm Index.Source regions of Asian dust are divided into three regions (A: dry arid, B: semi-arid, and C: cultivated), based upon the occurrence of blowing sand and dust storm. Eight meteorological stations are selected in three regions, which have frequent occurrences of blowing sand. Source regions of Asian dust that affect the Korean peninsula are gradually extending eastward. Positive anomalies of NDVI occurred in 1994, 1995, and 1998 when temperature was high and precipitation was heavy. However, the frequent occurrence of the dust phenomena is not always consistent with lots of vegetation, high temperature, and much precipitation in this study.     

Application of Grain Size Analysis to Study Sedimentary Environment of Sand Dune in the Vicinity of Tumen River

The dunes in estuary of Tumen River in China lie to the area between the Jiushaping and Fangchuan in the left bank of Tumen River (Fig.1). The dis-tance is about 15～20 km between the dunes and the coast. It ranges from China to D. P. R. Korea and Russia. The range of the height of dunes is about 15～20 m and the width is 100～200 m. By the re-connaissance, we protracted 9 section planes of the dunes and collected 40 sand samples of the dunes, and identified the sedimentary environment …     

EMERGY ANALYSIS OF GRAIN PRODUCTION SYSTEM IN JIANGSU AND SHAANXI PROVINCE

1INTRODUCTIONGrain production has always been top-priority issue con-cerned by government and people (MA etal., 2002). Af-ter China put household contract responsibility system in force, its domestic issue of grain was basically settled in the mid 1980s (MA and XU, 1999). However, in the days when idea of sustainable development is broadly accepted, efficiency and sustainability of grain produc-tion are now in question, which have prompted interest in reviewing grain production patterns…     

ELECTROCHEMICAL CORROSION BEHAVIOR OF STEEL IN THE JUNCTURE AREA OF SEA CLAY AND SAND

Corrosion behavior of steel in the juncture area of sea clay and sand was studied. The results show that galvanic corrosion occurred between steel samples buried in sea clay and sand, and that the polarity of the galvanic cell reversed after some testing later. The cause of reversing of polarity is discussed.     

Rapid climatic changes recorded in loess successions

Detailed grain-size analyses, both in China and western Europe, indicate the occurrence of short climatic cycles during loess deposition of the last glacial. Cold episodes coincided with enhanced deposition of relatively coarse loess and alternated with relatively warmer episodes with decreased deposition of finer loess and soil formation. In Europe, these oscillations may coincide with alternations of permafrost development and degradation. The short-term climatic events in the loess sections are similar to the Dansgaard–Oeschger events in ice-core records.     

石英砂扫描电镜在漓江“泥砾”成因中的应用

本文根据扫描电镜对从漓江河谷钻孔中的泥砾层取得的481粒石英砂表面形态特证研究结果:石英砂多数颗粒保持棱角状外形并遭受不同程度的磨蚀,具阶状贝壳断口,平直或弧形刮削面和多向擦痕,沿解理面破碎呈“V”字形沟和撞击碟形坑,以及微溶蚀孔、隙、蜂窝状溶孔群和SiO_2再沉积等表面形态结构特征。认为它是在第四纪古地理湿热气候条件下泥石流沉积的产物,物源可能来自境内或周边的泥盆系砂岩和境外的花岗岩。     

Electric Discharges in the Protoplanetary Nebula as a Source of Impulse Magnetic Fields to Promote Dust Aggregation

Lightning discharge generated in the protoplanetary nebula is viewed as a temporally isolated surge in the flow of electrically charged particles, similar to that of terrestrial lightning. If the current is intense enough, a powerful circular impulse magnetic field is generated around the instantaneous virtual electric conductor. Such magnetic field is capable of magnetizing dust grains containing ferromagnetic components present in its vicinity to their saturation levels. As a result, dust grains attract one another, forming the aggregates. This magnetically driven attraction suggests an important process possibly operational at an early stage of the planetary accretion. Based on both a classical model for electric conductor, and the theory of Lienard–Wiechert electromagnetic potentials, our calculations show that the magnetic impulse due to a discharge channel of a few cm in diameter transferring a charge of about 10⁴ electrons reaches as high as 10 T. At these magnetic fields, the ferromagnetic dust grains, and possibly the already-formed larger aggregates as well, are easily magnetized to the saturation levels, producing compact clusters exhibiting permanent magnetic moments.     

沉积物粒度分析在厦门市第四纪环境研究和地层划分对比中的应用

采用MS2000型激光粒度分析仪进行测试，利用计算机粒度分析软件对数据进行整理和计算，绘制出样品的频率曲线、概率累积曲线以及粒度众数位值曲线等图件并进行沉积环境分析。厦门地区第四纪环境演化经历了中更新世同安组(含泥中粗砂、含泥细中砂、砂为主)海积一冲积一更新统上部龙海组(含泥粗中砂、含泥细中砂、含泥粗砂、粗砂、细中砂、含细砾中粗砂、中细砂等)冲积一洪冲积一更新世上部东山组(砂、砂砾、含泥中粗砂、粗砂、泥质中细砂、细砂、中粗砂等)冲洪积及部分海积(粉砂、细粉砂、含碳质泥、粘土、淤泥质粘土、粉砂质粘土等)一全新世长乐组(粉砂，淤泥质粘土、粉砂质粘土、碳质粘土、含砂淤泥质粘土，粉砂质亚粘土、粉细砂亚粘土等)海湾沉积。在解释环境变化的同时，说明粒度变化曲线在一定程度上可以作为地层划分的依据之一，并以此对研究区地层进行了详细划分。