About Darcy's law in non-Galilean frame

This paper is aimed towards investigating the filtration law of an incompressible viscous Newtonian fluid through a rigid non-inertial porous medium (e.g. a porous medium placed in a centrifuge basket). The filtration law is obtained by upscaling the flow equations at the pore scale. The upscaling technique is the homogenization method of multiple scale expansions which rigorously gives the macroscopic behaviour and the effective properties without any prerequisite on the form of the macroscopic equations. The derived filtration law is similar to Darcy's law, but the tensor of permeability presents the following remarkable properties: it depends upon the angular velocity of the porous matrix, it verifies Hall–Onsager's relationship and it is a non-symmetric tensor. We thus deduce that, under rotation, an isotropic porous medium leads to a non-isotropic effective permeability. In this paper, we present the results of numerical simulations of the flow through rotating porous media. This allows us to highlight the deviations of the flow due to Coriolis effects at both the microscopic scale (i.e. the pore scale), and the macroscopic scale (i.e. the sample scale). The above results confirm that for an isotropic medium, phenomenological laws already proposed in the literature fails at reproducing three-dimensional Coriolis effects in all types of pores geometry. We show that Coriolis effects may lead to significant variations of the permeability measured during centrifuge tests when the inverse Ekman number Ek⁻¹ is 𝒪(1). These variations are estimated to be less than 5% if Ek⁻¹<0.2, which is the case of classical geotechnical centrifuge tests. We finally conclude by showing that available experimental data from tests carried out in centrifuges are not sufficient to determining the effective tensor of permeability of rotating porous media. Copyright © 2004 John Wiley & Sons, Ltd.     

纳米碳酸钙材料的工业合成与应用

该文对目前工业上生产纳米碳酸钙的方法作了较为详细的综述。对一步碳化法、两步碳化法、多段喷雾碳化法、旋转填充床碳化反应器碳化技术制备链形、纺锤形、球形、立方形等不同形状的纳米碳酸钙材料的方法进行了比较和总结     

基于历史关系数据库的时空数据库实现研究

时空数据库是研究如何存储历史和当前的时空数据,从而跟踪分析某一区域的变化,最终实现时空模型化和模拟地学过程.采用历史关系数据库模式的时空数据库可以充分利用传统时态数据库时态查询功能和GIS空间分析处理功能这些方面成熟的研究成果和现有系统,降低时空数据库建立的费用和开销.分析了采用扩展关系型时空数据库的原因,介绍了历史关系数据库模式、时态关系代数和查询语言,研究了采用历史关系数据库模式在全关系化空间数据库中组织时态信息的方法,从而实现时空数据库.以麦地轮作为例说明了采用历史关系数据库模式建立时空数据库的可行性和有效性.     

近几十年我国极端气温变化特征分区方法探讨

采用聚类统计检验分析和旋转主分量分析相结合确定中心站的方法,利用我国多年极端气温资料,对我国最高和最低气温年际变化型态进行区划。结果表明,这两种方法结合可以互相补充,使分区结果更具客观性。中国极端高温和极端低温年际变化分别可划为12和11个不同类型的区域,分别计算了各区域第一主成分的方差贡献率以及各区域之间的两两相关系数,检验证明分区是合理的。     

国际油气井钻头进展概述（二）——FuseTek融合钻头与Pexus组合钻头

NOV公司2013年向市场推出FuseTek融合钻头。它将PDC钻头的高钻速与孕镶金刚石钻头的耐磨性结合于一体,适宜于钻进中硬—坚硬、高研磨性地层。FuseTek钻头已广泛应用于刚果、厄瓜多尔、中国、哥伦比亚等国家。应用表明,该新型组合钻头比PDC钻头或牙轮钻头钻进效率提高许多,工作寿命增加1～3倍或更多。Shear Bits公司于2014年推出Pexus组合钻头。该钻头广泛应用于加拿大冰川冰碛物钻进。地层上部硬卵砾石层利用可转动硬质合金齿钻进,下部软砂岩与页岩则运用PDC碎岩。整个冰碛物地层用一个Pexus钻头一钻到底。所述3类组合式钻头（含Kymera钻头）对于未来实现“一个钻头,一口井”的目标有重要意义。     

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.     

基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。     

一种适用大旋转角的GPS网三维平差方法

在工程测量中往往采用工程坐标系,该坐标系坐标轴可能与GPS采用的WGS84坐标系的相应坐标轴间存在较大的旋转角,此时若仍直接按照一般方法进行三维约束平差计算会给结果带来不利影响,本文给出了一种适用大旋转角的GPS网三维平差方法,该方法能够很好地处理大旋转角时直接采用一般三维平差模型计算带来的不利影响,同时又能够获得平差后工程网中各点的点位精度。工程应用表明该方法非常有效,具有很好的应用价值。     

三维旋转扫描测量平台设计与实现

本设计主要用于360°旋转的三维扫描,实现角度数据的实时获取。设计中采用单片机控制交流伺服电机进行自定的角度、速度与方向的旋转并实时上传时间、角度数据至上位机进行处理,实现了对平台旋转精度的控制与检测,着重研究了该传感器误差源的产生,对实际应用中的误差进行了定量分析,利用偏心改正、4分频等方法减少了误差,提高了参数精度。角度范围为360°,角度分辨率为0.01°。     

Convection in a rotating annulus having sidewalls of height-dependent thermal conductance

Abstract

Thermal convection in a vertically-mounted, rotating annulus of a particular design proposed by Davies and Walin (1977) is investigated. The annulus used in the present study differs from the conventional type in some important aspects: the sidewalls are finitely conducting, and the thermal conductance of the sidewalls is height-dependent. The theoretical model due to Davies and Walin is briefly recounted. The present study aims to verify the theoretical model; we have acquired numerical solutions to the governing Navier-Stokes equations. The numerical results are supportive of the theoretical contentions. The near-linear dependence of the isothermal slope on the parameter D, which is a function of Ω and ΔT, is corroborated within reasonable limits. New data on the vertical and radial structures of the meridional and azimuthal flows are presented. The numerical results also confirm that the shape of the sidewall thickness has a substantial influence on the meridional flow patterns. In the bulk of the interior flow field, the dominant azimuthal flow field and the temperature field are linked by the thermal wind relation.