An explicit representation of steady state response of a beam on an elastic foundation to moving harmonic line loads

A closed‐form deflection response of a beam rest is presented in this paper using the integral transform method. The theory of linear partial differential equations is used to represent the deflection of beam subjected to a moving harmonic line load in integration form. The solution is finally carried out using the inverse Fourier transform. To evaluate the integration analytically, poles of the integrand are identified with the help of algebraic equation theory. Residue theorem is then utilized to represent the integration as a contour integral in the complex plane. Closed‐form deflections and numerical results are provided for different combinations of load frequency and velocity. Copyright © 2002 John Wiley & Sons, Ltd.     

Stability of the periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions

The periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions are well known (Kurcheeva, 1973). Here the stability of these solutions are examined by applying Poncaré's characteristic equation for periodic solutions. It is found that the isoperiodic solutions are stable and all other solutions are unstable.     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

钢支撑性能对高层钢结构动力反应的影响

钢框架－支撑结构体系是高层钢结构常用的结构体系。支撑的性能对高导钢框架－支撑体系的动力性能影响较大，其中支撑的工细比是关键的影响因素。文中通过大量的计算分析研究支撑长细比对高层钢框架－支撑体系弹塑性地震反应的影响，所得结论可供工程设计时参考。     

巨型钢结构抗震研究综述

介绍了巨型结构及其特点，着重总结、论述了巨型钢结构在分析方法和抗震研究方面的发展现状，指出了这种钢结构形式在抗震研究中存在的主要问题及今后进一步的研究方向。     

Electron microscopy study of the sakhaite from endogenous borate deposit in Hunan, China

Sakhaite was first discovered by Ostrovskaya, Pertsev and Nikitina at Siberia in the former Soviet Union. By using the X-ray diffraction technique, they proved that the crystal system of sakhaite was cubic (a = 1.464 nm), its possible space groups were Fm3m, F432, F43m, Fm3, F23, and its crystal chemical for-mula was Ca48Mg16(CO3)16(BO3)28Cl4(OH)8 4H2O[1]. Chichagov, Simonov and Belov studied the crystal structure of synthetic sakhaite and determined that its space group was F4132, …     

基础隔震层钢螺旋弹簧软碰撞限位实验研究

设计制作了基础隔震软碰撞限位实验模型与3种类型的钢螺旋弹簧限位器,给出了实测的限位器力学特性参数。进行9种工况的振动台模型实验,分析实验数据得出了软碰撞限位器参数对结构反应的影响规律,优选出了适用于本隔震实验模型的软碰撞限位工况。     

高强复合玻璃纤维加固RC梁疲劳性能研究

现有桥梁中有一部分需要进行加固,而采用高强复合玻璃纤维进行加固在国内尚属起步阶段,研究其加固性能,尤其是加固后的疲劳性能是一项有意义的工作。本文进行了高强复合玻璃纤维加固RC梁在重复荷载作用下的弯曲性能试验研究。试验表明:粘贴高强复合玻璃纤维后混凝土梁的疲劳寿命提高了2倍多,其疲劳变形减少了61%~65%,加固梁的疲劳抗裂性能得到了较大改善。因此,粘贴复合玻璃纤维是提高混凝土梁疲劳性能的有效方法,可用于延长混凝土梁的使用寿命。本文还通过加固梁的钢筋应力幅值与疲劳寿命的关系,拟合出S-N曲线。     

唐山市钢铁工业发展特征及动力机制分析

唐山市钢铁工业自20世纪80年代以来一直为唐山市的支柱产业,90年代以来,省属特大型企业唐钢和地方钢铁企业都得到了迅速发展,在唐山市经济总量中占据着举足轻重的地位。本文详细分析唐山市钢铁产业的发展过程,探讨改革开放以来影响城市最具代表性产业的驱动因素。研究表明,基于本地化的区域产业基础和国家引导下的制度因素是唐山市钢铁工业迅速发展的主要驱动力,企业在动态的环境中适应和创新的能力则是内在因素。产品结构雷同、彼此利益独立使企业之间面临着激烈竞争,因此建议发挥政府的协调作用,引导地方企业调整工艺流程和产品结构,扶植相关产业,促进区域经济整体发展。