Controls on porphyroblast size along a regional metamorphic field gradient

Garnet-bearing schists from the Waterville Formation of south-central Maine provide an opportunity to examine the factors governing porphyroblast size over a range of metamorphic grade. Three-dimensional sizes and locations for all garnet porphyroblasts were determined for three samples along the metamorphic field gradient spanning lowest garnet through sillimanite grade, using high-resolution X-ray computed tomography. Comparison of crystal size distributions to previous data sets obtained by stereological methods for the same samples reveals significant differences in mode, mean, and shape of the distributions. Quantitative textural analysis shows that the garnets in each rock crystallized in a diffusion-controlled nucleation and growth regime. In contrast to the typical observation of a correlation between porphyroblast size and position along a metamorphic field gradient, porphyroblast size of the lowest-grade specimen is intermediate between the high- and middle-grade specimens’ sizes. Mean porphyroblast size does not correlate with peak temperatures from garnet-biotite Fe-Mg exchange thermometry, nor is post-crystallization annealing (Ostwald Ripening) required to produce the observed textures, as was previously proposed for these rocks. Robust pseudosection calculations fail to reproduce the observed garnet core compositions for two specimens, suggesting that these calc-pelites experienced metasomatism. For each of these two specimens, Monte Carlo calculations suggest potential pre-metasomatism bulk compositions that replicate garnet core compositions. Pseudosection analyses allow the estimation of the critical temperatures for garnet growth: ∼481, ∼477, and ∼485°C for the lowest-garnet-zone, middle-garnet-zone, and sillimanite-zone specimens, respectively. Porphyroblast size appears to be determined in this case by a combination of the heating rate during garnet crystallization, the critical temperature for the garnet-forming reaction and the kinetics of nucleation. Numerical simulations of thermally accelerated, diffusion-controlled nucleation, and growth for the three samples closely match measured crystal size distributions. These observations and simulations suggest that previous hypotheses linking the garnet size primarily to the temperature at the onset of porphyroblast nucleation can only partially explain the observed textures. Also important in determining porphyroblast size are the heating rate and the distribution of favorable nucleation sites.     

Gravity torques for surface waves

The effects of the gravity torques acting on the angular momentum of surface gravity waves are calculated theoretically. For short crested waves the gravity torque is caused by the force of gravity on the orbiting fluid particles acting down the slopes of the crests and troughs and in the direction parallel to the crests and troughs. The gravity torque tries to rotate the angular momentum vectors, and thus the waves themselves, counterclockwise in the horizontal plane, as viewed from above, in both hemispheres. The amount of rotation per unit time is computed to be significant assuming reasonable values for the along-crest and trough slopes for waves in a storm area. The gravity torque has a frequency which is double the frequency of the waves. For long crested waves the gravity torque acts in the vertical plane of the orbit and tries to decelerate the particles when they rise and accelerate them when they fall. By disrupting the horizontal cyclostrophic balance of forces on the fluid particles (centrifugal force versus pressure force) the gravity torque accounts qualitatively for the three characteristics of breaking waves: that they break at the surface, that they break at the crest, and that the crest breaks in the direction of wave propagation.     

城市建设中的地震小区划与浅层地震探测

简要阐述地震小区划在现代城市建设中的重要性以及在实施地震小区划的研究中浅层地震探测的重要作用及其方法原理,并给出应用浅层地震探测在城市地震小区划中的实例。     

不规则波折射物理模型试验研究

作者曾发表过“不规则波折射的数学模型〔１〕。为了与数学模型的计算结果相互验证，在大连理工大学海岸及近海工程国家重点实验室进行了不规则波折射物理模型试验。试验研究结果表明：提出的“不规则波折射数学模型”对频谱采用等能量分割、对方向分布采用等间隔（Δθ＝ｃｏｓｎｔ）分割的组成波折射线性叠加法是合理的、可行的，可供港口及海岸工程规划、设计应用     

Monitoring the Kuroshio Extension with Dynamically Constrained Synthesis of the Acoustic Tomography, Satellite Altimeter and in situ Data

A finite-difference quasigeostrophic (QG) model of an open ocean region has been employed to produce a dynamically constrained synthesis of acoustic tomography and satellite altimetry data with in situ observations. The assimilation algorithm is based upon the 4D variational data interpolation scheme controlled by the model's initial and boundary conditions. The data sets analyzed include direct and differential travel times measured at the array of five acoustic transceivers deployed by JAMSTEC in the region of the Kuroshio Extension in 1997, Topex/Poseidon altimetry, CTD soundings, and ADCP velocity profiles. The region monitored is located within the area 27.5°–36.5°N, 143°–155°. The results of assimilation show that mesoscale variability can be effectively reconstructed by five transceivers measuring direct and reciprocal travel times supported by relatively sparse in situ measurements. The misfits between model and data lie within the observational error bars for all the data types used in assimilation. We have compared the results of assimilation with the statistical inversion of travel time data and analyzed energy balances of the optimized model solution. Energy exchange between the depth-averaged and shear components of the observed currents reveals a weak decay of the barotropic mode at the rate of 0.2 ± 0.7⋅10⁻⁵ cm²/s³ due to topographic interaction. Mean currents in the region are unstable with an estimate of the available potential energy flux from the mean current to the eddies of 4.7 ± 2.3⋅10⁻⁵ cm²/s³. Kinetic energy transition has the same sign and is estimated as 2.8 ± 2.5⋅10⁻⁵ cm²/s³. Potential enstrophy is transferred to the mesoscale at a rate of 5.5 ± 2.7⋅10⁻¹⁸ s⁻³. These figures provide observational evidence of the properties of free geostrophic turbulence which were predicted by theory and observed in numerical experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

电磁波信号在对流层中路径弯曲改正的级数展开式

大气折射延迟是空间大地测量中的一个主要误差源。本文严格地给出了中性大气路径弯曲改正的原理性公式。通过对各种因素量级的分析,在亚毫米量级的精度上给出了一个以视天顶距正切和正割乘积为参数的级数展开模型。新模型在球对称大气模型下,级数展开模型的精度达到了毫米量级,理论上可以展开到任意阶次,且可允许观测高度角小到5°。     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

New basis for the constitutive modelling of aggregated soils

Natural and compacted soils are usually characterized by aggregation of particles. The mechanical behaviour of these materials depends on soil structure. The oedometric compression tests performed on aggregated samples presented here showed that these materials exhibit a yield limit depending not only on stress history and stress state but also on soil structure. Evidence is provided using the neutron tomography technique. These results revealed that soil structure modification occurs together with plastic deformations. The experimental results are used to propose a new state parameter to quantify the soil structure. Based on pore-scale experimental observations, an evolution law for this parameter is proposed as a function of associated plastic strains. Considering both soil fabric and inter-particle bonding effects, a new yield limit depending on stress state, stress history and soil structure is introduced for the aggregated soils. Accordingly, a new constitutive framework consistent with strain hardening plasticity is proposed to consider soil structure effects in the modelling of aggregated soils.