PAKSEY大桥桥面线形的测量控制

在PAKSEY大桥的施工过程中,对节段梁的预制、节段梁的悬臂拼装以及桥面体系的施工进行了精密的测量控制,从而使桥面线形与设计线形的误差最小。     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems

The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability.     

二滩水电站地震遥测台网持续时间震级的研制

利用二滩水电站地震遥测台网的速度量和位移量观测记录,收集了震级ＭＬ为０．４￣５．４的４６０次地震（Δ〈２１０ｋｍ）的振动持续时间３５００多条,制作了该台网的持续时间震级公式和便查表。在方法上,不同于通常的按一次或两次曲线拟合,而采取计算机自动分段按折线拟合的方法,以阻尼最小二乘法完成其计算;在资料上,先分台制作８个子台的持续时间震级公式,在此基础上选择仪器、台基及公式中参数相近的子台,制作了适用于     

Laboratory study of soil-CFRP interaction using pull-out test

Soil is a material which is weak in tension; however, different materials such as geotextiles are used to address this inadequacy. In recent years more than one million square metres of geotextiles were used for reinforcing soil. Nevertheless, there are several significant problems associated with geotextiles, such as creep, low modulus of elasticity and susceptibility to aggressive environments. Carbon fibre reinforced polymer (CFRP) was introduced over two decades ago to the field of structural engineering and it can also be used in geotechnical engineering. CFRP has all the benefits associated with geotextiles and it boasts a higher strength, higher modulus, no creep and reliability in aggressive environments. In this investigation, the interface properties of CFRP-sand and fine sand were investigated using the pull-out test. The pull-out test device was designed and assembled using a triaxial loading device and a direct shear device. In the pull-out test, the normal force applied by the triaxial loading and pull-out force is applied by a direct shear device. CFRP samples were prepared in the lab. Precast and cast-in-place samples were tested. The pull-out force and corresponding displacements of each of the materials were recorded and compared.     

Shaking table tests of a resilient bridge system with precast reinforced concrete columns equipped with springs

This paper presents the shake table test results of a novel system for the design of precast reinforced concrete bridges. The specimen comprises a slab and four precast columns. The connections are dry and the columns are connected to the slab by an ungrouted tendon. One of the tendon ends is anchored above the slab, in series with a stack of washer springs, while the other end is anchored at the bottom of the column. The addition of such a flexible restraining system increases the stability of the system, while keeping it relatively flexible allowing it to experience negative post-uplift stiffness. It is a form of seismic isolation. Anchoring the tendon within the column, caps the design moment of the foundation, and reduces its size. One hundred and eighty-one shake table tests were performed. The first 180 caused negligible damage to the specimen, mainly abrasion at the perimeter of the column top ends. Hence, the system proved resilient. The 181^st excitation caused collapse, because the tendons unexpectedly failed at a load less than 50% of their capacity (provided by the manufacturer), due to the failure of their end socket. This highlights the importance of properly designing the tendons. The tests were used to statistically validate a rigid body model. The model performed reasonably well never underestimating the median displacement response of the center of mass of the slab by more than 30%. However, the model cannot predict the torsion rotation of the slab that was observed in the tests and is due to imperfections.     

结合分段三次多项式与Akima法的等高线平滑方法

实际地形一般是连续变化的。根据数字高程模型(Digital Elevation Model,DEM)自动绘制的等高线由折线段相连而成,需要进一步平滑,以便更准确地描绘出实际地形的分布。结合分段三次多项式与Akima法来对等高线进行平滑处理。实验证明该方法效率高,结果满意,达到较好的平滑效果。     

嘉黎断裂带活动性研究进展

嘉黎断裂是一条横贯青藏高原东南部的大型走滑断裂,在印度和欧亚板块碰撞前后通过调整应力平衡发挥着重要作用.本文根据前人对嘉黎断裂的研究成果,从地质学和地球物理学的角度,系统地总结分析嘉黎断裂带构造背景、壳幔结构、晚第四纪和现今的活动性质和速率.基于地质学方法,搜集前人在测年方面的研究结果,限定断裂的活动年限以及活动速率.同时在东段的北侧分支嘎龙寺附近,采用光释光测年法增加两个测年点,完善活动速度资料,并对断裂自西向东不同部位的走滑速率和错动断距进行对比分析.基于地球物理学观测资料,分析地震活动性和壳幔物质的速度结构、各向异性等参数,利用波形拟合方法,新增18个3~5级地震的震源机制解.结果表明,嘉黎断裂现今的构造变形主要表现为右旋走滑运动,但是在不同的分段具有显著的差异性,新生的西兴拉—达木分支是地震最活跃的区域.在此基础上,探讨青藏高原的构造演化过程,分析东构造结地区构造运动的稳定性,为川藏铁路雅安—林芝段工程建设地质灾害风险评估提供必要参考资料.     

大桥水库地震遥测台网持续时间震级的研制

由于大桥水库地震台网各子台台基和地下结构的特殊性, 造成震级计算上的较大偏差。为此, 利用该台网各子台同一型号地震仪的垂直向速度量记录, 测量了震级为０５ ～５４ 的４６２ 次地震的振动持续时间, 制作了该台网的持续时间震级公式和便查表。在方法上, 不同于通常的按一次或二次曲线的拟合, 而采取计算机自动分段按折线拟合的方法, 以阻尼最小二乘法完成其计算。先进行分台拟合, 比较异同之后, 合并数据再拟合, 最后给出了适宜于鲁坝、瓦吉木两台和大石头、凉风岗、瓦坡支和彝海子４ 个台使用的两套平均持续时间公式和便查表, 以供大桥水库地震台网测震分析使用。     

新型预制装配式楼盖抗倒塌试验研究

地震及爆炸荷载下的结构连续倒塌问题对人民的生命财产造成重大威胁,是土木工程领域研究的一个热门方向。为了提高新型预应力空心楼板结构的整体性,防止由于竖向支承构件的失效形成楼板的局部或者连续倒塌,对2块新型预应力空心板足尺模型进行四分点静力加载试验,研究新型预制装配式两跨连续楼板的抗连续倒塌能力。试件均由预应力空心短板通过板端伸出U形筋和胡子筋进行对接连接,板侧纵向拼缝通过胡子筋和植筋与边梁的纵筋进行连接,2个试件的计算跨度相同。本文采用在加载过程中突然拆除中间支座,得到楼板破坏形态、裂缝发展、承载能力、应变、最大变形等试验结果。对试件的受力过程、悬索作用机理进行分析,最后得到楼盖拼缝及板侧边梁连接构造的布置合理,新型预制装配式楼盖采用合适的周边连系和横向拼缝连接可以达到理想的抗倒塌能力。