The European vision for oceans and seas—Social and political dimensions of the Green Paper on Maritime Policy for the EU

The EU Green Paper on Maritime Policy is the European response to the new generation of ocean strategies based on science, technology and innovation aimed at new objectives, such as the strengthening of security and access to new resources. The European character of the proposal is found in the presence of social, cultural and historical elements, what is called the “European vision”. The viability of a European vision of the oceans and the idea of maritime empire as an extension of the current concept of empire within the general context of emerging ocean strategies are the elements offered up for debate on this European Union initiative.     

Møre Margin: Crustal structure from analysis of Expanded Spread Profiles

Analysis in both the x—t and —p domains of high-quality Expanded Spread Profiles across the Møre Margin show that many arrivals may be enhanced be selective ray tracing and velocity filtering combined with conventional data reduction techniques. In terms of crustal structure the margin can be divided into four main areas: 1) a thicker than normal oceanic crust in the eastern Norway Basin; 2) expanded crust with a Moho depth of 22 km beneath the huge extrusive complex constructed during early Tertiary breakup; 3) the Møre Basin where up to 13–14 km of sediments overlie a strongly extended outer part with a Moho depth at 20 km west of the Ona High; and 4) a region with a 25–27 km Moho depth between the high and the Norwegian coast. The velocity data restricts the continent-ocean boundary to a 15–30 km wide zone beneath the seaward dipping reflector wedges. The crust west of the landward edge of the inner flow is classified as transitional. This region as well as the adjacent oceanic crust is soled by a 7.2–7.4 km s^–1 lower crustal body which may extend beneath the entire region that experienced early Tertiary crustal extension. At the landward end of the transect a 8.5 km s^–1 layer near the base of the crust is recognized. A possible relationship with large positive gravity anomalies and early Tertiary alkaline intrusions is noted.     

Size of flatfish larvae at transformation, functional demands and historical constraints

At hatching the larvae of flatfish closely resemble the bilateral symmetric larvae of other teleosts, especially perciforms. Literature data show that transformation to asymmetric benthic juveniles normally occurs at body lengths between 10 and 25 mm. Unexpectedly, minimal size at its completion (including eye migration) can be 4.1 mm SL and maximal size is over 72 mm. In this paper we consider the functional requirements for a successful switch from a symmetric pelagic larva to a typical asymmetric juvenile benthic flatfish partly based on evidence from other teleosts. The unfavourable period of eye migration and transition to a benthic habitat requires some food reserves and rewiring and/or recalibration of vision and gravity-associated structures utilised previously by the still symmetric larvae for e.g. food detection. Binocular fixation of the prey probably occurs in that stage. Critical or sensitive periods occurring during development of fish larvae suggest that a completely functional symmetric stage of development must precede transformation. The normal size range in flatfish larvae at transformation seems to confirm our considerations. Recent data on temperature effects during development provide an explanation for metamorphosis at the minimal size. Some evidence for paedomorphic heterochrony in flatfish larvae is presented.     

From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

Water temperature behaviour in the River Loire since 1976 and 1881

Analysis of monthly mean river temperatures, recorded on an hourly basis in the middle reaches of the Loire since 1976, allows reconstruction by multiple linear regression of the annual, spring and summer water temperatures from equivalent information on air temperatures and river discharge. Since 1881, the average annual and summer temperatures of the Loire have risen by approximately 0.8?°C, this increase accelerating since the late 1980s due to the rise in air temperature and also to lower discharge rates. In addition, the thermal regime in the Orleans to Blois reach is considerably affected by the inflow of groundwater from the Calcaires de Beauce aquifer, as shown by the summer energy balance. To cite this article: F. Moatar, J. Gailhard, C. R. Geoscience 338 (2006).     

Une approche innovante pour modéliser la biodégradation des composés organochlorés volatils en aquifères poreux

The goal of this study was to develop an innovative chloroethene biodegradation module based on biological, thermodynamical and mechanistic concepts. The biodegradation scheme was based on the postulate that in each part of an aquifer only one degradation mechanism is dominant: the one involving the most energetic electron acceptor. Thus, the selection of the active degradation mechanism was a function of the concentration of different electron acceptors. Modified Monod-type kinetics was used in order to take into account the possible influence of some compounds on the biodegradation of a given organic compound. The numerical model developed was applied to a simple test case, whose results are presented here. To cite this article: F. Nex et al., C. R. Geoscience 338 (2006).     

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.     

Alpujarride attribution of the supposed ‘Almagride Complex’ (Betic Internal Zone,Almerı́a Province,Spain)Appartenance Alpujarride du prétendu « Complexe almagride » (Zones internes bétiques,province d'Almeria,Espagne)

The differentiation of units in the Sierra de Almagro has been a source of controversy. There were defined the Almagride and Ballabona–Cucharón complexes, the former considered by several authors as part of a Subbetic metamorphosed and outcropping in a tectonic window. In this study, the units of Ballabona, Almagro and Cucharón are integrated into a single one, that of Tres Pacos, because they correspond to different parts of the same stratigraphic series. This unit is tectonically over the Nevado–Filabride Complex. The existence of the Almagride and Ballabona–Cucharón complexes is discarded and their units form part of the Alpujarride Complex. To cite this article: C. Sanz de Galdeano, F.J. Garc??a Tortosa, C. R. Geoscience 334 (2002) 355–362.     

Soulèvement et plissement tectoniques révélés par analyse mathématique empirique de profils longitudinaux de rivières : un cas à TaiwanEmpirical mathematical analysis of longitudinal river profiles reveals tectonic uplift and folding: a case in Taiwan

We analyse longitudinal river profiles in southwestern Taiwan. As all necessary data are not available, a physical modelling of river erosion would be subject to large uncertainties. We thus shortcut this modelling and adopt simple empirical exponential equations giving riverbed elevation as a function of downstream distance. We identify a positive altimetric anomaly, which reveals active uplift of an anticline at the front of the fold-and-thrust belt. To cite this article: J. Angelier, R.-F. Chen, C. R. Geoscience 334 (2002) 1103–1111.     

基于网络的机器人跨平台远程实时控制

提出了一种基于网络的多层次结构的跨平台远程实时控制框架，它由智能与人机交互层、运动规划层、运动控制层和伺服控制层构成，并基于该框架完成了一套单机器人远程实时控制系统，进行了远程视觉控制试验。试验表明，该控制系统运行稳定，实时性强。