江西省地质灾害-气象预警预报系统研究

论文采用了降雨特征（用降雨诱发指数表征）与地质环境条件（以地质灾害敏感性指数表征）进行叠加、分析,确定预警预报等级,建立地质灾害-预警预报模型的方法;提出了预警产品制作与发布、多普勒雷达跟踪、应急指导、反馈信息收集、灾情调查的地质灾害气象预警预报工作程序。对近几年江西省地质灾害-预警预报效果分析,总结了地质灾害-预警预报成功与失败的经验教训,提出今后的工作设想与建议。应用基于GIS的地质灾害预警预报系统已在近几年的地质灾害-气象预警预报中不断完善,预警预报精度得到提高,防灾减灾效果明显,对保护人民生命财产安全发挥了重要作用。     

现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

Generalized Coarse Graining Procedures for Flow in Porous Media

This paper focuses on heterogeneous soil conductivities and on the impact their resolution has on a solution of the piezometric head equation: owing to spatial variations of the conductivity, the flow properties at larger scales differ from those found for experiments performed at smaller scales. The method of coarse graining is proposed in order to upscale the piezometric head equation on arbitrary intermediate scales. At intermediate scales large scale fluctuations of the conductivities are resolved, whereas small scale fluctuations are smoothed by a partialy spatial filtering procedure. The filtering procedure is performed in Fourier space with the aid of a low-frequency cut-off function. We derive the partially upscaled head equations. In these equations, the impact of the small scale variability is modeled by scale dependent effective conductivities which are determined by additional differential equations. Explicit results for the scale dependent conductivity values are presented in lowest order perturbation theory. The perturbation theory contributions are summed up with using a renormalisation group analysis yielding explicit results for the effective conductivity in isotropic media. Therefore, the results are also valid for highly heterogeneous media. The results are compared with numerical simulations performed by Dykaar and Kitanidis (1992). The method of coarse graining combined by a renormalisation group analysis offers a tool to derive exact and explicit expressions for resolution dependent conductivity values. It is, e.g., relevant for the interpretation of measurement data on different scales and for reduction of grid-block resolution in numerical modeling. This revised version was published online in July 2006 with corrections to the Cover Date.     

基于耦合场分割算法的ANSYS二次开发及其应用

耦合场分割算法是当前研究的热点之一。本文首先对比研究了瞬态热传导方程和孔压增长消散方程,提出了一种适用于ANSYS二次开发的分割算法,并对2种不同的预测值计算模式对计算稳定性的影响进行了分析。然后,据之对ANSYS温度—结构耦合场模块进行了开发,形成了岩土工程有效应力计算模块。数值实验表明,这种方法具有较高的计算精度和良好的计算稳定性,并且能够充分利用现有程序资源,具有较高的工程应用价值。     

An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems

The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability.     

索佳SET×130R系列全站仪的维修

介绍了索佳SET×130R系列全站仪的常规检查和调整,维修程序,为技术人员在解决索佳全站仪常见故障和几种指标参数的校正提供参考.     

顺序提取法探讨沉积物中主量元素在不同相态的分配特征

在Tessier以及欧共体标准局BCR等前人顺序提取方法的基础上,采用一套改进的顺序提取法对海洋沉积物以及一些水系沉积物标准物质的主量元素进行逐步提取。利用ICP—AES、ICP—MS方法分析了各提取液中Ti、A1、Na、Mg、K、Ca、P、Fe、Mn的含量以及它们在不同相态的分配特征,同时,进一步探讨了酸去除沉积物中非陆源组分的效果,结果显示,最后经盐酸淋滤后的样品,沉积物中的生物、自生组分已经被溶解,而残留下来的剩余物质基本上可代表海洋沉积物的陆源碎屑组分。     

基于性能的地震工程研究的新进展及对结构非线性分析的要求

结合国际地震工程界提出的新一代基于性能的地震工程的框架方法,重点阐述了性能评估中涉及的主要问题。对性能评估使用的静力非线性分析、动力非线性分析方法进行了总结,在此基础上详细阐述了在基于概率的性能评估中有应用前景的增量动力分析方法的概念、相关问题及其应用,并简要介绍了基于增量动力分析思想提出的一些简化方法。最后提出了今后研究的建议,特别是结构非线性分析方面的研究重点。     

Evaluating assumptions for seismic assessment of existing buildings

This paper evaluates the American FEMA 356 and the Greek GRECO (EC 8 based) procedural assumptions for the assessment of the seismic capacity of existing buildings via pushover analyses. Available experimental results from a four-storeyed building are used to compare the two different sets of assumptions. If the comparison is performed in terms of initial stiffness or plastic deformation capacities, the different partial assumptions of the procedures lead to large discrepancies, while the opposite occurs when the comparison is performed in terms of structural performance levels at target displacements. According to FEMA 356 assumptions, effective yield point rigidities are approximately four times greater than those of EC 8. Both procedures predicted that the structure would behave elastically during low-level excitation and that the structural performance level at target displacement for a high-level excitation would be between the Immediate Occupancy and Life Safety performance levels.     

基于性能的框架结构抗震设计研究

对国内外基于性能的抗震设计研究成果进行了较系统的综述与分析,研究表明,基于性能的抗震设计能够对结构在未来可能地震作用下的性能进行有效的控制,使破坏和损失限定在可接受的范围内。在此基础上,本文还初步提出了钢筋混凝土框架结构基于延性的抗震设计建议。