现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems

The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability.     

基于性能的地震工程研究的新进展及对结构非线性分析的要求

结合国际地震工程界提出的新一代基于性能的地震工程的框架方法,重点阐述了性能评估中涉及的主要问题。对性能评估使用的静力非线性分析、动力非线性分析方法进行了总结,在此基础上详细阐述了在基于概率的性能评估中有应用前景的增量动力分析方法的概念、相关问题及其应用,并简要介绍了基于增量动力分析思想提出的一些简化方法。最后提出了今后研究的建议,特别是结构非线性分析方面的研究重点。     

基于性能的框架结构抗震设计研究

对国内外基于性能的抗震设计研究成果进行了较系统的综述与分析,研究表明,基于性能的抗震设计能够对结构在未来可能地震作用下的性能进行有效的控制,使破坏和损失限定在可接受的范围内。在此基础上,本文还初步提出了钢筋混凝土框架结构基于延性的抗震设计建议。     

Application of consequence-based design criteria in regions of moderate seismicity

Current design criteria and principles of earthquake engineering design are reviewed, including safety factors, probabilistic approach, and two-level and multi-level functional design ideas. The modern multi-functional idea is discussed in greater details. When designing a structure, its resistance to and the intensity of the earthquake action are considered. The consequence of failure of the structure is considered only through a rough and empirical factor of importance, ranging usually from 1.0 to 1.5. This paper suggests a method of “consequence-based design,” which considers the consequences of malfunctioning instead of simply an importance factor. The main argument for this method is that damage to a structure located in different types of societies may have very different consequences, which are dependant on its value and usefulness to the society and the seismicity in the region.     

Lateral load pattern in pushover analysis

The seismic capacity curves of three types of buildings including frame, frame-shear wall and shear wall obtained by pushover analysis under different lateral load patterns are compared with those from nonlinear time history analysis. Based on the numerical results obtained a two-phase load pattern; an inverted triangle (first mode) load pattern until the base shear force reachesβ times its maximum value, V_max, followed by a (x/H)^α form, hereβ and α being some coefficients depending on the type of the structures considered, is proposed in the paper, which can provide excellent approximation of the seismic capacity curve for low-to-mid-rise shear type buildings. Furthermore, it is shown both the two-phase load pattern proposed and the invariant uniform pattern can be used for low-to-mid-rise shear-bending type and low-rise bending type of buildings. No suitable load patterns have been found for high-rise buildings.     

基于抗震性态的设防标准研究

以基于性态的抗震设计为出发点,并以我国为例,针对目前国内外抗震设防标准的若干问题和不足,提出了基于性态抗震设计的三环节抗震设防方法．将现有的设防内容改为确定结构的抗震设计类别、确定设计烈度或设计地震动参数、确定建筑的重要性等级３个方面,并分别在每一方面进行具体深入的研究,从而形成了一套完整的基于性态的抗震设防标准确定的原则、方法和框架,可以直接用来编制规范供抗震设计使用．      

Correlation study between ground motion intensity measure parameters and deformation demands for bilinear SDOF systems

The correlation between ground motion intensity measures （IM） and single-degree-of-freedom （SDOF） deformation demands is described in this study. Peak ground acceleration （APG）, peak ground velocity （VPG）, peak ground displacement （DPG）, spectral acceleration at the first-mode period of vibration [As（T1）] and ratio of VPG to APG are used as IM parameters, and the correlation is characterized by correlation coefficients p. The numerical results obtained by nonlinear dynamic analyses have shown good correlation between As（T1） or VPG and deformation demands. Furthermore, the effect of As（T1） and VPG as IM on the dispersion of the mean value of deformation demands is also investigated for SDOF systems with three different periods T=0.3 s, 1.0 s, 3.0 s respectively.     

结构分灾抗震设计:概念和应用

详细论述了结构分灾抗震设计的产生背景、设计思想、优化模型和基本原则，指出结构分灾设计是在分析基于投资—效益准则的结构抗震设计模型的基础上，对工程实践中一些成功经验的提炼和概括而形成的设计方法，工程领域中一些现行设计方法和措施就是分灾设计的具体应用。当工程师们待处理的问题必须考虑高度不确定性因素时，将分灾设计作为一种可能选用的设计理念，将有助于工程师们实现设计创新。分灾设计符合基于性能的抗震设计思想，可以方便地实现基于性能的设计。     

钢筋混凝土柱地震损伤模型比较研究

损伤指数是判断结构或构件经受地震作用后是否破坏、评价结构或构件破坏程度的重要指标,是对震后受损结构进行安全评估和修复加固的重要理论依据。基于40组钢筋混凝土柱的试验结果,对国内外7种较具代表性的损伤模型进行了对比分析。研究结果表明:对于同一试件,不同损伤模型计算得到的损伤指标差异较大,损伤曲线发展趋势亦不同;基于能量的损伤模型多表现出前期增长速度快和后期增长速度慢的上凸趋势,而基于变形和能量组合形式的双参数损伤模型多表现出前期增长速度慢和后期增长速度快的上凹趋势;Park-Ang模型及其改进形式能够较好地反映构件层次的损伤发展过程,但未知参数较多,计算过程较复杂,不利于整体结构层次的震害评估;从能量耗散原理角度提出的损伤模型更符合整体结构抗震的本质,未知参数少且计算过程简单,但存在边界条件的界定不明确的缺陷,因此还需要做更深入的研究。