Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.     

Estimation of snow water equivalent using microwave radiometry over Arctic first‐year sea ice

The magnitude and spatial distribution of snow on sea ice are both integral components of the ocean–sea‐ice–atmosphere system. Although there exists a number of algorithms to estimate the snow water equivalent (SWE) on terrestrial surfaces, to date there is no precise method to estimate SWE on sea ice. Physical snow properties and in situ microwave radiometry at 19, 37 and 85 GHz, V and H polarization were collected for a 10‐day period over 20 first‐year sea ice sites. We present and compare the in situ physical, electrical and microwave emission properties of snow over smooth Arctic first‐year sea ice for 19 of the 20 sites sampled. Physical processes creating the observed vertical patterns in the physical and electrical properties are discussed. An algorithm is then developed from the relationship between the SWE and the brightness temperature measured at 37 GHz (55°) H polarization and the air temperature. The multiple regression between these variables is able to account for over 90% of the variability in the measured SWE. This algorithm is validated with a small in situ data set collected during the 1999 field experiment. We then compare our data against the NASA snow thickness algorithm, designed as part of the NASA Earth Enterprise Program. The results indicated a lack of agreement between the NASA algorithm and the algorithm developed here. This lack of agreement is attributed to differences in scale between the Special Sensor Microwave/Imager and surface radiometers and to differences in the Antarctic versus Arctic snow physical and electrical properties. Copyright © 2003 John Wiley & Sons, Ltd.     

基于Poulos弹性理论的被动桩改进算法

传统的Poulos弹性理论仅适合于均质土中土体侧向位移时桩的性状分析,无法考虑土的层状特性。通过引入层状地基中作用一水平集中力的广义Mindlin解和地面作用有竖向荷载时的应力和位移通解,对Poulos方法进行了改进,使之扩展到多层土中,还用于研究堆载条件下的被动桩变形和受力响应。算例分析表明,改进弹性理论要比Poulos方法更为严密、合理,提高了计算精度,应用范围也更广。     

GPS卫星反射信号增强技术研究

本文根据GPS卫星反射信号在海洋参数测量、无源雷达目标探测以及大地测绘中的应用,从天线接收、信号处理运算和多路径信号抵消角度,详细地研究了GPS卫星反射信号增强技术,给出了相应天线和电路结构及信号处理方法,并进行了计算机仿真,结果表明所提出的技术能增强GPS卫星反射信号。     

非均匀月壤介质的被动微波辐射传输模拟

基于非均匀月壤物理模型和辐射传输方程,模拟月壤介质中的微波辐射传输特性,探讨频率、月壤厚度等与月表亮温的关系。结果表明:在低频段,月壤微波辐射亮温的动态变化范围较大,可探测的月壤厚度大,3 GHz时的最大可探测月壤厚度达12.4 m;在高频段对应的可探测月壤厚度较小,特别是从50GHz往后的频率段内,最大可探测月壤厚度均小于2 m。不同频率的亮温-厚度变化曲线没有交叉点,且频率越高,所能探测的月壤厚度越小。根据模拟结果,建立了月壤厚度与亮温的查找表。基于查找表,利用单个波段的亮温数据即可得到月壤厚度信息。     

幔源CO_2释出机理、脱气模式及成藏机制研究进展

针对幔源CO2如何从地幔岩浆中脱出并进入沉积地层中形成CO2气藏聚集这一关键问题,总结了国内外研究进展和前缘方向。研究表明,地幔深部的碱性玄武岩浆和碱性岩浆才是深部流体和CO2等挥发份大量赋存、渗滤和释出的场所。浅成侵入岩、次火山岩和火山通道等是CO2释放和聚集的有利位置,岩浆期后和岩浆衰弱期的热液活动阶段是CO2大量释放和聚集的有利时期。幔源CO2进入沉积盆地中具有3种脱气模式,即沿岩石圈断裂直接脱气模式、热流底辟体脱气模式和壳内岩浆房-基底断裂组合脱气模式。CO2的固有物化性质决定其运移相态多样,具有运移和聚集过程同步的特征。只有在满足大量的化学消耗及地层水或原油的溶解和耗散之后才能形成CO2有效聚集。幔源CO2成藏和分布主要受岩浆气源体和气源断裂体系的控制。今后,在超临界CO2及其对油气运移聚集的作用、CO2与深大断裂及火山岩的关系、CO2脱气运移机制、CO与常规烃类油气的耦合差异成藏机制等方面仍需要进一步的研究和探索。     

三种被动式积沙仪积沙效率的野外实验研究

积沙仪积沙效率的高低直接影响近地表输沙率的测定，从而影响着风沙地貌的研究和风沙工程设计，对目前三种常用积沙仪在相同条件下（同一下垫面、相同风速）的积沙进行了野外观测。结果表明：（1）相同条件下，楔形积沙仪积沙量远远大于其它两种；（2）近地面积沙量随高度分布上，楔形积沙仪能更好地反映风沙流结构；（3）与其它两种积沙仪相比，楔形积沙仪所采集沙子中的小粒径颗粒含量明显多于其它两种积沙仪结果，而较大粒径颗粒的含量呈相反趋势，造成这些差异的原因在于楔形积沙仪采用的流线型构造和网状结构，从而对风沙流的阻挡程度较小，今后应推广楔形积沙仪的使用。     

Monitoring volcanic hazard using eddy covariance at Solfatara volcano, Naples, Italy

An eddy covariance (EC) station was deployed at Solfatara crater, Italy, June 8–25, 2001 to assess if EC could reliably monitor CO₂ fluxes continuously at this site. Deployment at six different locations within the crater allowed areas of focused gas venting to be variably included in the measured flux. Turbulent (EC) fluxes calculated in 30-min averages varied between 950 and 4460 g CO₂ m⁻² d⁻¹; the highest measurements were made downwind of degassing pools. Comparing turbulent fluxes with chamber measurements of surface fluxes using footprint models in diffuse degassing regions yielded an average difference of 0% (±4%), indicating that EC measurements are representative of surface fluxes at this volcanic site. Similar comparisons made downwind of degassing pools yielded emission rates from 12 to 27 t CO₂ d⁻¹ for these features. Reliable EC measurements (i.e. measurements with sufficient and stationary turbulence) were obtained primarily during daytime hours (08:00 and 20:00 local time) when the wind speed exceeded 2 m s⁻¹. Daily average EC fluxes varied by ±50% and variations were likely correlated to changes in atmospheric pressure. Variations in CO₂ emissions due to volcanic processes at depth would have to be on the same order of magnitude as the measured diurnal variability in order to be useful in predicting volcanic hazard. First-order models of magma emplacement suggest that emissions could exceed this rate for reasonable assumptions of magma movement. EC therefore provides a useful method of monitoring volcanic hazard at Solfatara. Further, EC can monitor significantly larger areas than can be monitored by previous methods.     

Steel frames with bracing mechanism and hysteretic dampers

A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd.     

非活动大陆边缘的天然气水合物及其成藏过程述评

非活动陆缘是板块活动相对较弱的地区，也是水合物发育的有利地区。通过对世界各地非活动陆缘地区水合物富集情况的系统分析，发现断褶组合构造、底辟构造以及“麻坑”地貌（Pockmark)与水合物的关系密切。尽管模拟海底反射层（Bottom Simulating Reflector,简称BSR，下同）是最重要的水合物识别标志，但水合物与BSR之间并不存在严格的一一对应关系。非活动陆缘具有丰富的烃类物质来源和适宜的温压条件，而断裂－褶皱组合构造、垒堑式构造和底辟构造等则为烃类气体的运移、富集和成藏提供了有利的构造环境，便于最终形成水合物。非活动陆缘的深水区往往发育有多期叠合盆地，因其物源、温压、构造和沉积条件的内在关联性，常常形成深部石油、中部天然气、浅部水合物的“三位一体”烃类能源结构模式。