Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.     

水中矿物油荧光特性实验研究

为了实现现场测量地表水中矿物油含量的全光纤荧光计的研制。采用荧光光谱测量分析方法 ,于 1 999年 1 0月— 2 0 0 0年 5月 ,采集了国内外不同的地区原油和成品油共 2 3种 ,用1 4种不同波长的激发光激励 ,进行荧光光谱特性测量实验研究。同时 ,对不同浓度的矿物油、水混合液也进行了测量实验 ,得出其最低检测浓度为 0 .0 0 5mg/L ;测量了青岛近岸海域表层受油污染海水的含油量为 0 .0 1～ 0 .2 2mg/L ;此外对水中矿物油受激荧光发射原理也作了简述。并对水中矿物油荧光光谱特性、浓度与荧光强度的关系 ,以及为研制现场测量水中矿物油浓度的全光纤荧光计的可能性作出了结论性的意见     

欧北地区深层三维地震采集技术

辽河盆地由于其特殊的地震地质条件,以往采集的深层地震资料信噪比和分辨率都较低,已经严重制约了油田的进一步勘探和开发.为了彻底摆脱地震资料品质对勘探工作的束缚,努力提高资料的信噪比和分辨率,辽河油田首先选择辽河盆地东部凹陷欧利坨子北为突破口,通过采取最佳岩性激发、有效弱信号保护和变观测系统施工等一系列的技术措施,取得了较好的效果.     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!     

弹性波的三维有限元模拟

本文讨论了弹性波瞬态传播问题的三维有限元计算方法及当前存在的实际困难.针对要求计算机内存大和计算时间长的问题,采取了改进措施.由于采用了集中质量矩阵和修正的中心差分时间积分显格式相结合的方法,可以使计算机内存和计算时间大为减少;由于采用结点定位法,最适合用于目前发展的并行计算机系统,可使计算速度大大增快;还采用了有效激发震源法,有效激发区是随时间步进的增加而逐步增大,这不仅能节省计算时间,而且使波场的传播过程一目了然,本文计算了由两种介质组成的三维楔形问题,得到若干典型剖面的瞬时波场图及随时间变化的合成地震图.     

任意载荷激励下直角三角形板单元局部动力效应

本文推导了在任意载荷激励下直角三角形板单元局部动力效应修正公式。采用单边积分法，对单元边上的单位宽度上的内力进行局部动力修正，代替以往的用加密网格提高精度的方法。计算结果表明，局部动力效应影响不可忽略，本文方法可使计算结果更为精确。这对分析大型复杂结构环境载荷激励下的局部动力效应具有参考价值。     

地球自转研究新进展

对８０年代以来关于地极移动、日长变化以及它们的地球物理激发机制的研究进展作了较为全面的评述，其中也包括了我国学者的大量研究工作。从中可以看出，现代天文测技术和多学科交叉的综合研究对天文地球动力学和地球科学进展的深远影响。     

吉林省地质灾害类型及防治对策探讨

本文针对吉林省的地质灾害类型及各类地质灾害的成因，分布及其危害进行了论述。对其防治对策进行了探讨，提出了切合本省实际的五项防治措施。     

Seismic response of a cable‐stayed bridge deck under multi‐component non‐stationary random ground motion

A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd.