An explicit representation of steady state response of a beam on an elastic foundation to moving harmonic line loads

A closed‐form deflection response of a beam rest is presented in this paper using the integral transform method. The theory of linear partial differential equations is used to represent the deflection of beam subjected to a moving harmonic line load in integration form. The solution is finally carried out using the inverse Fourier transform. To evaluate the integration analytically, poles of the integrand are identified with the help of algebraic equation theory. Residue theorem is then utilized to represent the integration as a contour integral in the complex plane. Closed‐form deflections and numerical results are provided for different combinations of load frequency and velocity. Copyright © 2002 John Wiley & Sons, Ltd.     

DCMT光电扫描主测微器的设计与研究

DCMT主测微器不同于其它类型的子午环测微器,它具有自校准测定仪器参数的功能。该测微器采用了活动光栅的方案,其优点是能观测近极星和各类准直像;活动光栅另一个显著优点是不同赤纬星几乎可用相同的观测时间.对“V”形光栅的工作原理和误差进行了详细讨论,并给出了一组严格的公式。其系统误差来源有:光栅形状改正、光栅驱动方向相对于光栅的倾斜、光栅驱动方向相对于赤径方向的倾斜、星径曲率改正。     

Optical spectrum based measurement of flotation slurry contents

Monitoring and control of a flotation circuit is mainly based on the information gained by assaying the process slurry lines. In flotation plants, usually an X-ray fluorescence analyzer is used to obtain the on-line assays. This article introduces the visual and near-infrared reflectance spectroscopic analysis of the process slurries as a supplementary method which complements the on-line assay information available from an X-ray fluorescence analyzer. It is shown that the spectral information can be used to accurately predict the element contents in the slurry in between successive XRF analyses. Since the spectral measurements can be taken with high frequency as opposed to the sparse X-ray fluorescence analysis, a practically continuous on-line estimate of the slurry contents is reached. These estimates can be used in the plant control to improve the overall performance of the circuits and to yield also economical savings. Additionally, the frequent monitoring of the grades can provide means to eliminate rapid disturbances in the circuits, thus improving the stability of the process.     

0421号热带风暴"海马"登陆前后环境场对其移向和强度影响的分析

0421号热带风暴“海马(Haima)”于2004年9月13日12:00在浙江省温州市沿海登陆,登陆后迅速减弱为热带低压,20:00在浙江境内消失.本研究采用物理量诊断分析法,探讨该热带风暴登陆前后涡度场、湿焓场变化对其移向和强度的影响.结果表明,该热带风暴登陆后,涡度(ξ)明显减弱.涡度局地变化(ξ/t)值分布显示,风暴移动方向的后方,涡度减弱的趋势比前方涡度增大的趋势更剧烈;风暴有向其外围(ξ/t)正值中心(即涡度增幅最大)移动的趋势.该热带风暴登陆前、后,湿焓都增大,但登陆后湿焓增大趋势已大大减弱;风暴有向湿焓局地变化(E/t)正值中心移动的趋势,即向能量增强最大的方向移动.     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th     

Dynamic Analysis of A Pontoon-Separated Floating Bridge Subjected to A Moving Load

1 .Introduction Since the most significant feature of a movingloadisits mobility,the interaction betweenthe ve-hicle and bridge is very complicated,which can be classified as a coupled vibration problem.There-fore ,much attention has been paid to the dyna…     

利用GPS水准点精化局部CQG2000

CQG2000模型的精度仍不能满足中、大比例尺的测图需要,如何充分利用现有成果,提高其价值和实用性,是目前需要迫切解决的问题。本文提出了通过加密GPS水准点来提高现有CQG2000精度的方法,并研究了GPS水准点数目和分布对提高结果的影响。     

基于最小二乘配置的三维空间坐标转换

在求解未知转换参数时,鉴于公共点坐标本身的误差,提出利用最小二乘配置法进行空间坐标转换,即将公共点本身坐标作为随机参数,把转换参数作为非随机参数进行处理,最后通过实验对比分析表明,该方法明显优于一般坐标转换方法。     

区域似大地水准面确定的最小二乘支持向量机方法

支持向量机(SVM)是近年来发展起来的机器学习的新方法,它较好地解决小样本、非线性、高维数、局部极小点等实际问题.文中研究支持向量机的拓展算法--最小二乘支持向量机(LSSVM),并将其应用于确定大面积复杂似大地水准面.通过工程实例并与神经网络模型和二次曲面多项式拟合模型相比较,验证确定区域似大地水准面的LSSVM方法的有效性.     

模拟退火算法在控制网平差中的应用

线性最小二乘估计在对非线性函数进行线性近似的过程中会产生模型误差,而一些非线性参数估计方法可能因为函数复杂而难以求导,法方程系数矩阵秩亏或呈病态矩阵时难以求解,非线性迭代解法有时对初始值的选择存在依赖性,不恰当的初始值会导致迭代无法收敛。针对这些问题,引入了模拟退火算法,介绍了该算法的基本原理、计算步骤和收敛性,并以3个控制网平差应用为例,说明该算法具有无需求导求逆,简洁实用,易于编程等优势,并能实现全局优化,获得高精度的平差结果。