基于PSR-WSVM模型的边坡位移预测

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。     

黄土高原古植被与再造山川秀美

要想恢复秀美的山川,主要在于恢复被人类严重破坏的原始植被.黄土高原的原始植被到底是什么样子,学者们说法不一.孢粉分析是最重要的方法.目前,研究结果已揭示出黄土高原古植被在第四纪以来显示着时间上、空间上的变化.古土壤代表间冰期夏季风盛行的湿热气候,植被比较繁盛;黄土代表冰期冬季风盛行的干冷气候,植被凋凌.全新世中期5000～6000年前,现代间冰期气候最佳时期,半坡人生存之时,森林茂密并有亚热带植物入侵,但兰州一带1万年来一直保持着荒漠草原的面貌.因此,黄土高原植被的恢复应参照各地的原始植被并考虑现代气候条件,因地制宜地实施.在东南部可以恢复森林,中西部可以恢复森林草原,西北部只能种草恢复草原.     

图象的模型及其统计特性

本文对图象的统计特性及其适用模型作了分析。讨论了以前常用的平稳图象模型的缺陷,对实际图象的统计特性作了分析,认为它是非平稳的,不满足各态历经性,同时在空间上是高度相关的;讨论了相应的随机参数统计模型和描述性统计模型。指出作用于整幅图象的“全局”图象复原算法比每次只独立计算单个象元的“点”图象复原算法更为优越。     

Thaw modification of frost-fissure wedges,Richards Island,Pleistocene Mackenzie Delta,Western Arctic Canada

Thaw modification is the general process whereby frost-fissure wedges are modified during thaw, and by which frost-fissure pseudomorphs may develop. Specific processes of thaw modification are inferred from ice-wedge pseudomorphs, composite-wedge pseudomorphs and deformed sand wedges in the Pleistocene Mackenzie Delta: i.e. thermal erosion, collapse, subsidence, refreezing, loading, buoyancy, spreading, folding and shearing. Thaw modification is believed to result in selective preservation of pseudomorphs and wedges. Sand wedges are more likely to be preserved than are ice-wedge pseudomorphs or compositewedge pseudomorphs, because only those sand wedges that penetrate massive ice or icy sediments are prone to thaw modification. Furthermore, whereas ice wedges preferentially develop in ice-rich, fine-grained sediments (thaw-sensitive), their pseudomorphs appear to be selectively preserved in ice-poor, coarse-grained sediments (thaw-stable).     

伪随机码调制的CW半导体激光雷达试制报告

本文报告一种用半导体激光器作光源,用子脉冲宽度100ns,长度为511的周期伪随机码对半导体激光器的输出作幅度调制;APD作光电检测器,高速数字信号处理器TMS320C25作信号处理的激光雷达组成方案和试作样机的实验结果。     

用PCI中断实现射电望远镜跟踪的方法

讨论运用PCI 9054(美国PLX公司生产的接口芯片)作为接口芯片的PCI(Peripheral Component Interconnect)板卡的软硬件设计,以实现天线跟踪的两个时间同步中断。利用标准秒信号中断作为系统时钟同步信号,并同步产生时间间隔为20ms(或40、50ms,可选)的中断信号,来处理天线跟踪指令输出。中断信号通过PCI中断口INTA#接入计算机,在驱动中识别不同的中断信号,并在应用程序响应中断处理后,命令ACU(Antenna Control Unit)机,实现射电天文望远镜的同步跟踪。其控制过程分3部分阐述:硬件设计、驱动程序设计、安装及应用;着重讨论了前两者的设计方法及思路。     

Sedimentary evolution of a Late Pleistocene temperate red algal reef (Coralligène) on Rhodes,Greece: correlation with global sea‐level fluctuations

Autochthonous red algal structures known as coralligène de plateau occur in the modern warm‐temperate Mediterranean Sea at water depths from 20 to 120 m, but fossil counterparts are not so well‐known. This study describes, from an uplifted coastal section at Plimiri on the island of Rhodes, a 450 m long by 10 m thick Late Pleistocene red algal reef (Coralligène Facies), interpreted as being a coralligène de plateau, and its associated deposits. The Coralligène Facies, constructed mainly by Lithophyllum and Titanoderma, sits unconformably upon the Plio‐Pleistocene Rhodes Formation and is overlain by a Maerl Facies (2 m), a Mixed Siliciclastic‐Carbonate Facies (0·2 m) and an Aeolian Sand Facies (2·5 m). The three calcareous facies, of Heterozoan character, are correlated with established members in the Lindos Acropolis Formation in the north of the island, while the aeolian facies is assigned to the new Plimiri Aeolianite Formation. The palaeoenvironmental and genetic‐stratigraphic interpretations of these mixed siliciclastic‐carbonate temperate water deposits involved consideration of certain characteristics associated with siliciclastic shelf and tropical carbonate shelf models, such as vertical grain‐size trends and the stratigraphic position of zooxanthellate coral growths. Integration of these results with electron spin resonance dates of bivalve shells indicates that the Coralligène Facies was deposited during Marine Isotope Stage 6 to 5e transgressive event (ca 135 to 120 ka), in water depths of 20 to 50 m, and the overlying Maerl Facies was deposited during regression from Marine Isotope Stage 5e to 5d (ca 120 to 110 ka), at water depths of 25 to 40 m. The capping Aeolian Sand Facies, involving dual terrestrial subunits, is interpreted as having formed during each of the glacial intervals Marine Isotope Stages 4 (71 to 59 ka) and 2 (24 to 12 ka), with soil formation during the subsequent interglacial periods of Marine Isotope Stages 3 and 1, respectively. Accumulation rates of about 0·7 mm year^?1 are estimated for the Coralligène Facies and minimum accumulation rates of 0·2 mm year^?1 are estimated for the Maerl Facies. The existence of older red algal reefs in the Plimiri region during at least Marine Isotope Stages 7 (245 to 186 ka) and 9 (339 to 303 ka) is inferred from the occurrence of reworked coralligène‐type lithoclasts in the basal part of the section and from the electron spin resonance ages of transported bivalve shells.     

Giant submarine landslide grooves in the Neoproterozoic/Lower Cambrian Phe Formation, northwest Himalaya: Mechanisms of formation and palaeogeographic implications

Giant groove casts have been found in the upper Proterozoic to Lower Cambrian Phe Formation (Haimanta Group), a siliciclastic sandstone/shale succession in the Tethyan Zone of the Higher Himalaya tectonic unit. The grooves are among the largest linear erosion structures related to submarine mass-movements observed in the geologic record. They are up to 4 m wide, about 0.2 m deep and can be traced for more than 35 m without changing their character. The grooves are straight, subparallel to cross-cutting striations with shallow semi-circular cross-sections and well-defined superimposed minor ridges and grooves. Groove casts exist on the soles of several sandstone beds within a 73 m thick logged section, commonly associated with flute casts. Their characteristics were compared with several other types of ancient and modern submarine linear erosion structures. A sand-rich, non-channelized basin floor depositional environment is inferred from the lithofacies, the combination of sedimentary structures, the lack of coarse-grained pebbly facies, the lateral continuity of beds, and the lack of channel structures. The grooves probably formed by laminar debris flows/concentrated density flows dragging blocks of already lithified sediment across the basin floor. When the bedding is structurally rotated back to horizontal, the groove casts show consistent North–South oriented palaeocurrent trends, with South-directed palaeocurrent directions indicated by flute casts. These palaeocurrent orientations contrast with previous palaeogeographic reconstructions of this area, which propose sediment delivery from the South. We therefore suggest a new “double provenance” model for the spatial relationship of late Proterozoic to Early Cambrian strata of the Himalaya, in which Lesser and Tethyan Himalayan age-equivalent sediment was deposited in a connected basin, where the former received detritus from the South, and the latter from a hitherto unknown source in the North. One possible candidate for this northern source is the South China Block and an associated Neoproterozoic volcanic arc.     

Electromagnetic signals associated with stick–slip of quartz-free rocks

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.     

Modeling households’ decisions on reconstruction of houses damaged by earthquakes––Japanese case study

In this study, households’ decisions on reconstruction of damaged houses were modeled, using questionnaire data in Japan. Characteristics of households’ decisions were investigated using parameter estimation results. The effects of subsidizing policy were evaluated as follows. First, subsidy for rebuilding may be effective for the households whose houses were heavily damaged. Second, there is a possibility that subsidy accelerated rebuilding of houses by the households having children. Third, subsidy for rebuilding may not be effective for elderly people’s households and households in depopulated areas.