Variations of the Kuroshio Axis South of Kyushu in Relation to the Large Meander of the Kuroshio

The characteristics of the Kuroshio axis south of Kyushu, which meanders almost sinusoidally, are clarified in relation to the large meander of the Kuroshio by analyzing water temperature data during 1961–95 and sea level during 1984–95. The shape of the Kuroshio axis south of Kyushu is classified into three categories of small, medium, and large amplitude of meander. The small amplitude category occupies more than a half of the large-meander (LM) period, while the medium amplitude category takes up more than a half of the non-large-meander (NLM) period. Therefore, the amplitude and, in turn, the curvature of the Kuroshio axis is smaller on average during the LM period than the NLM period. The mean Kuroshio axis during the LM period is located farther north at every longitude south of Kyushu than during the NLM period, with a slight difference west of the Tokara Islands and a large difference to the east. A northward shift of the Kuroshio axis in particular east of the Tokara Islands induces small amplitude and curvature of the meandering shape during the LM period. During the NLM period, the meandering shape and position south of Kyushu change little with Kuroshio volume transport. In the LM formation stage, the variation of the Kuroshio axis is small west of the Tokara Islands but large to the east due to a small meander of the Kuroshio. In the LM decay stage, the Kuroshio meanders greatly south of Kyushu and is located stably near the coast southeast of Kyushu. This revised version was published online in July 2006 with corrections to the Cover Date.     

四川南充嘉陵江曲流的形成及曲流地质公园建立的意义

嘉陵江曲流地貌景观在世界曲流地貌中具有典型性和代表性。系统的阐述了嘉陵江曲流的演化、形成,并进行了与国际河谷曲流的对比研究,提出建立国家级曲流地质公园的意见和保护建议。     

A model of equilibrium bed topography for meander bends with erodible banks

Channel curvature produces secondary currents and a transverse sloping channel bed, along which the depth increases towards the outer bank. As a result deep pools tend to form adjacent to the outer bank, promoting bank collapse. The interaction of sediment grains with the primary and secondary flow and the transverse sloping bed also causes meanders to move different grain sizes in different proportions and directions, resulting in a consistent sorting pattern. Several models have been developed to describe this process, but they all have the potential to over‐predict pool depth because they cannot account for the influence of erodible banks. In reality, bank collapse might lead to the development of a wider, shallower cross‐section and any resulting flow depth discrepancy can bias associated predictions of flow, sediment transport, and grain‐size sorting. While bed topography, sediment transport and grain sorting in bends will partly be controlled by the sedimentary characteristics of the bank materials, the magnitude of this effect has not previously been explored. This paper reports the development of a model of flow, sediment transport, grain‐size sorting, and bed topography for river bends with erodible banks. The model is tested via intercomparison of predicted and observed bed topography in one low‐energy (5·3 W m^?2 specific stream power) and one high‐energy (43·4 W m^?2) study reach, namely the River South Esk in Scotland and Goodwin Creek in Mississippi, respectively. Model predictions of bed topography are found to be satisfactory, at least close to the apices of bends. Finally, the model is used in sensitivity analyses that provide insight into the influence of bank erodibility on equilibrium meander morphology and associated patterns of grain‐size sorting. The sensitivity of meander response to bank cohesion is found to increase as a function of the available stream power within the two study bends. Copyright © 2002 John Wiley & Sons, Ltd.     

Variability in the vertical hyporheic water exchange affected by hydraulic conductivity and river morphology at a natural confluent meander bend

River confluences and their associated tributaries are key morphodynamic nodes that play important roles in controlling hydraulic geometry and hyporheic water exchange in fluvial networks. However, the existing knowledge regarding hyporheic water exchange associated with river confluence morphology is relatively scarce. On January 14 and 15, 2016, the general hydraulic and morphological characteristics of the confluent meander bend (CMB) between the Juehe River and the Haohe River in the southern region of Xi'an City, Shaanxi Province, China, were investigated. The patterns and magnitudes of vertical hyporheic water exchange (VHWE) were estimated based on a one‐dimensional heat steady‐state model, whereas the sediment vertical hydraulic conductivity (K_v) was calculated via in situ permeameter tests. The results demonstrated that 6 hydrodynamic zones and their extensions were observed at the CMB during the test period. These zones were likely controlled by the obtuse junction angle and low momentum flux ratio, influencing the sediment grain size distribution of the CMB. The VHWE patterns at the test site during the test period mostly showed upwelling flow dominated by regional groundwater discharging into the river. The occurrence of longitudinal downwelling and upwelling patterns along the meander bend at the CMB was likely subjected to the comprehensive influences of the local sinuosity of the meander bend and regional groundwater discharge and finally formed regional and local flow paths. Additionally, in dominated upwelling areas, the change in VHWE magnitudes was nearly consistent with that in K_v values, and higher values of both variables generally occurred in erosional zones near the thalweg paths of the CMB, which were mostly made up of sand and gravel. This was potentially caused by the erosional and depositional processes subjected to confluence morphology. Furthermore, lower K_v values observed in downwelling areas at the CMB were attributed to sediment clogging caused by local downwelling flow. The confluence morphology and sediment K_v are thus likely the driving factors that cause local variations in the VHWE of fluvial systems.     

Influence of Mesoscale Eddies on Variations of the Kuroshio Path South of Japan

The influences of mesoscale eddies on variations of the Kuroshio path south of Japan have been investigated using time series of the Kuroshio axis location and altimeter-derived sea surface height maps for a period of seven years from 1993 to 1999, when the Kuroshio followed its non-large meander path. It was found that both the cyclonic and anticyclonic eddies may interact with the Kuroshio and trigger short-term meanders of the Kuroshio path, although not all eddies that approached or collided with the Kuroshio formed meanders. An anticyclonic eddy that revolves clockwise in a region south of Shikoku and Cape Shionomisaki with a period of about 5–6 months was found to propagate westward along about 30°N and collide with the Kuroshio in the east of Kyushu or south of Shikoku. This collision sometimes triggers meanders which propagate over the whole region south of Japan. The eddy was advected downstream, generating a meander on the downstream side to the east of Cape Shionomisaki. After the eddy passed Cape Shionomisaki, it detached from the Kuroshio and started to move westward again. Sometimes the eddy merges with other anticyclonic eddies traveling from the east. Coalescence of cyclonic eddies, which are also generated in the Kuroshio Extension region and propagate westward in the Kuroshio recirculation region south of Japan, into the Kuroshio in the east of Kyushu, also triggers meanders which mainly propagate only in a region west of Cape Shionomisaki. This revised version was published online in July 2006 with corrections to the Cover Date.     

基于正演模拟的复合曲流带砂体内部构型解剖研究及应用

Q油田是渤海大型河流相沉积的稠油油田,其北区NmⅣ1主力含油砂体为复合曲流带沉积,经过16年的注水开发,油水关系复杂,平面注水受效不均的问题日益严重,如何优化注釆结构来改善开发效果已成为急需解决的问题。优化现有注釆井网的关键是认识复合曲流带砂体内部不同单河道砂体的切叠关系及展布特征,即对目标砂体开展内部不同单河道的构型单元分布特征研究。首先,依据岩电标定的测井曲线特征、局部发育的薄夹层以及曲流河纵向下切模式,对复合砂体内部不同单河道砂进行划分与对比;然后基于单井沉积微相划分结果,开展井间剖面相对比分析,表明复合砂体内部存在5种不同单河道砂体切叠模式;建立5种正演概念模型,利用地震正演模拟合成地震记录,总结了不同单河道砂体间顶面高程差异、点坝边界、废弃河道等曲流河砂体构型边界的波形特征;利用地震属性提取及多种地质构型方法,综合分析,最终实现了海上大井距条件下复合曲流带砂体内部不同单一曲流河砂体构型边界的精细识别;最后由注采动态资料的响应关系评估不同的切叠模式对注水效果的侧向遮挡程度,并以此为依据,优化现有的注釆井网并取得了非常好的生产效果。     

南海冬、夏季环流的三维数值模拟

本文利用一个斜压三维陆架海模式——HAMSOM模式对12月份和8月份的南海环流进行数值模拟,结果为:对上层流场,在12月份,在西沙群岛－中沙群岛海区间呈现一个气旋式环流,在越南中部东岸存在一支南向西边界流,在金兰湾的远海为一局地反气旋涡,在南海南部,主要表现为万安滩的气旋式大弯曲(气旋涡)及在北康暗沙北侧的反气旋涡;在8月份,在东沙群岛－中沙群岛－吕宋岛西侧海域间存在一大尺度的气旋涡,在南海西部主要表现为以西沙群岛南部的气旋涡与金兰湾－礼乐滩间的反气旋式大环流相对峙的局面,同时在万安滩东侧有－气旋涡.由于斜压效应、底形效应的作用,使冬、夏季的南海南部中层流场几乎与上层流场相反.     

Morphodynamics of a bedrock‐alluvial meander bend that incises as it migrates outward: approximate solution of permanent form

In meandering rivers cut into bedrock, erosion across a channel cross‐section can be strongly asymmetric. At a meander apex, deep undercutting of the outer bank can result in the formation of a hanging cliff (which may drive hillslope failure), whereas the inner bank adjoins a slip‐off slope that connects to the hillslope itself. Here we propose a physically‐based model for predicting channel planform migration and incision, point bar and slip‐off slope formation, bedrock abrasion, the spatial distribution of alluvial cover, and adaptation of channel width in a mixed bedrock‐alluvial channel. We simplify the analysis by considering a numerical model of steady, uniform bend flow satisfying cyclic boundary conditions. Thus in our analysis, ‘sediment supply’, i.e. the total volume of alluvium in the system, is conserved. In our numerical simulations, the migration rate of the outer bank is a specified parameter. Our simulations demonstrate the existence of an approximate state of dynamic equilibrium corresponding to a near‐solution of permanent form in which a bend of constant curvature, width, cross‐sectional shape and alluvial cover distribution migrates diagonally downward at constant speed, leaving a bedrock equivalent of a point bar on the inside of the bend. Channel width is set internally by the processes of migration and incision. We find that equilibrium width increases with increasing sediment supply, but is insensitive to outer bank migration rate. The slope of the bedrock point bar varies inversely with both outer bank migration rate and sediment supply. Although the migration rate of the outer bank is externally imposed here, we discuss a model modification that would allow lateral side‐wall abrasion to be treated in a manner similar to the process of bedrock incision. Copyright © 2016 John Wiley & Sons, Ltd.     

Modeling planform evolution of a mud‐dominated meandering river: Quinn River,Nevada, USA

A depth‐averaged linearized meander evolution model was calibrated and tested using the field data collected at the Quinn River in the Black Rock Desert, Nevada. Two approaches used to test the model were: (1) simulating meander evolution and comparing the results with the observed 38 year migration pattern; and (2) fitting the model parameters to present bank asymmetry (the ratio of the maximum bank gradients on opposite sides of the channel). The data required as input were collected in the field during a high flow in May 2011 and from aerial photographs and LiDAR data. Both approaches yielded similar results for the best fit parameter values. The bank asymmetry analysis showed that the bank asymmetry and the velocity perturbation have high correlation at close to zero spatial lag while the maximum correlation between the bank asymmetry and maximum bend curvature is offset by about 25 m. The model sufficiently replicated 38 years of channel migration, with a few locations significantly under‐ or over‐predicted. Inadequacies of the flow model and/or variation in bank properties unaccounted for are most likely the causes for these discrepancies. Flow through the Quinn River was also simulated by a more general 3D model. The downstream pattern of near‐bank shear stresses simulated by the 3D model is nearly identical to those resulting from the linearized flow model. Topographic profiles across interior bends are essentially invariant over a wide range of migration rates, suggesting that the traditional formulation that cut bank erosion processes govern migration rates is appropriate for the Quinn River. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimal precursor of the transition from Kuroshio large meander to straight path

We used the conditional nonlinear optimal perturbation(CNOP) method to explore the optimal precursor of the transition from Kuroshio large meander(LM) to straight path within a barotropic inflowoutflow model,and found that large amplitudes of the optimal precursor are mainly located in the east of Kyushu,which implies that perturbations in the region are important for the transition from LM to straight path.Furthermore,we investigated the transition processes caused by the optimal precursor,and found that these processes could be divided into three stages.In the first stage,a cyclonic eddy is advected to the formation region of the Kuroshio large meander,which enhances the LM path and causes a cyclonic eddy to shed from the Kuroshio mainstream.This process causes the LM path to change into a small meander path.Subsequently,the small meander is maintained for a period because the vorticity advection is balanced by the beta effect in the second stage.In the third stage,the small meander weakens and the straight path ultimately forms.The positive vorticity advecting downstream is responsible for this process.The exploration of the optimal precursor will conduce to improve the prediction of the transition processes from LM path to straight path,and its spatial structure can be used to guide Kuroshio targeted observation studies.