A GIS-based step-wise procedure for assessing physical exposure in fragmented archipelagos

Wind and waves are major forces affecting the geomorphology and biota in coastal areas. We present a generally applicable method for measuring and calculating fetch length, fetch direction and wave exposure. Fetch length and direction, measured by geographic information system-based methods, are used along with wind direction and wind speed data to estimate wave height and period by applying forecasting curves. The apparent power of waves approaching the shore, used as a proxy for wave exposure, is then calculated by a linear wave model. We demonstrate our method by calculating fetch lengths and wave exposure indices for five areas with varying exposure levels and types of meteorological conditions in the Finnish Archipelago Sea, situated in the northern Baltic Sea. This method is a rapid and accurate means of estimating exposure, and is especially applicable in areas with geomorphologically varying and complicated shorelines. We expect that our method will be useful in several fields, such as basic biogeographical and biodiversity research, as well as coastal land-use planning and management.     

The Taconite Inlet Lakes Project: a systems approach to paleoclimatic reconstruction

A comprehensive study of meteorological, hydrological, limnological and sedimentological conditions in the watersheds of density-stratified (meromictic) lakes around Taconite Inlet, Northern Ellesmere Island, N.W.T., Canada was carried out from 1990–1992. Lakes C1 and C2 contain seawater trapped by isostatic uplift as the former embayments became isolated from the sea. These lakes, and Lake C3, contain varved sediments which provide an annually resolvable paleoclimatic record. By studing the major systems influencing sedimentation in one of these lakes (Lake C2) a better understanding of the climatic controls on varve formation, and hence on the paleoclimatic signal in the varved sediment record, was obtained. The varves of Lake C2 provide a proxy record of summer temperature for the region.This is the first in a series of papers published in this issue on the Taconite Inlet Lakes Project. These papers were collected by Dr R. S. Bradley.     

Crystal-rich mass flow deposits related to the eruption of a sublacustrine silicic cryptodome (Early Permian Collio Basin, Italian Alps)

Sedimentological, granulometric and petrographic data are presented from a detailed study on a crystal-rich mass flow deposit, which is presumably related to the eruption of a sublacustrine cryptodome. The deposit forms a prominent intercalation in the Lower Permian Collio Formation in the Italian Alps north of Brescia. Outcrops of the 10–20-m-thick volcaniclastic deposit (Dasdana I Beds, DB) can be traced over 12 km from east to west. The DB consists of a thick, crystal-rich, sandy–gravelly lower subunit representing a sequence of amalgamated Bouma-a(b) divisions overlain by a thin, well-bedded, sandy–muddy subunit that is rich in outsize porphyritic silicic fragments. Modal and computer-aided image analyses reveal that the crystal-rich lower subunit contains up to 80% of volcanogenic crystals. Some samples contain up to 60% of porphyritic fragments, which have a phenocryst content of about 20%. The wide textural range from cryptocrystalline, poikilomosaic, to rarer medium-grained granophyric groundmass, the irregular to lensoid shapes of the porphyritic fragments, and the presence of basement and sedimentary clasts suggest that the DB originated from a sublacustrine eruption of a partially extrusive cryptodome (ca. 1.6 km³). Two other porphyritic felsic cryptodomes (Dosso dei Lupi, Dosso del Bue), described briefly here, emplaced into the Collio Formation sometime after the DB event, and expose flat bases and tilted sediments at their sides. Textures observed in these domes are comparable to those found in the DB porphyritic fragments.     

The nature of calcareous deposits along pan margins in eastern central Namibia

In a region along the western margin of the Kalahari in eastern Namibia and western Botswana, many pan basins have mainly calcareous deposits along part of their margins. These are typically lined by low vertical scarps. In Namibia, these pans are mainly located in dry river beds. The petrographical study of these deposits demonstrates that they consist of lacustrine sediments that have to a varying extent been affected by early‐diagenetic processes and by the formation of late‐diagenetic features. The original composition of the deposits ranges from highly calcareous sediments, typically with ostracod, diatom and charophyte remains, to entirely non‐calcareous diatomites. The deposits generally show an upward increase in total carbonate content, which is mainly a synsedimentary feature. The early‐diagenetic processes that affected the deposits include the formation of orthic siliceous nodules. At a later stage, secondary calcite enrichment occurred, leaving only the silica‐impregnated sections unaffected. This enrichment partly accounts for the upward increase in total carbonate content in some profiles and often resulted in the development of a highly calcareous surface horizon. Sepiolite and amorphous silica that are part of the groundmass of the deposits may also partly have formed at this stage. Late‐diagenetic features include various forms of secondary calcite and silica. This study of pan basins in eastern central Namibia indicates that a lacustrine rather than purely pedogenic origin should also be considered for calcareous deposits that commonly occur along pan margins in other parts of southern Africa. Copyright © 2002 John Wiley & Sons, Ltd.     

坝上高原安固里淖粒度年纹层与环境变化

在安固里淖湖心区获取一未扰动沉积物样柱，分析发现了由冬季风搬运物与湖心沉积共同形成的粒度年纹层，建立了纹层年表，恢复了安固里淖湖区8507aB.P，以来的环境变化过程。8507-5429aB.P。冬季风活动较弱，后期的所波动；5429-3244aB.P.冬季风活动较强，3244-2494aB.P。冬季风活动减弱；2494-1165aB.P。冬季风活动略有增强；1165aB.P以来，冬季风活动减弱。安固里小淖粒度年纹层反映的冬季风变化情况与我国北方地区同期的环境变化和海平面变化有很好的对应关系。     

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.     

鄱阳湖组(第四系)的修订及特征

根据对鄱阳湖地区 Zk0 1钻孔柱状剖面的研究 ,对鄱阳湖组的定义进行修订、补充 ,认为鄱阳湖组为一套以青灰色淤泥质粘土、黄褐色粘土、粉质粉土为主夹少量粉砂或细砂的湖泊—河口三角洲相沉积。年代地层为第四系全新统 ,底界年龄约 6 2 10± 12 5 a B.P.,开阔湖泊沉积始于 32 4 0± 180 a B.P.,且由北向南时代渐新 ,具有明显的穿时性     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

Geomorphological and sequence stratigraphic variability in wave‐dominated,shoreface‐shelf parasequences

Abstract Physical stratigraphy within shoreface‐shelf parasequences contains a detailed, but virtually unstudied, record of shallow‐marine processes over a range of historical and geological timescales. Using high‐quality outcrop data sets, it is possible to reconstruct ancient shoreface‐shelf morphology from clinoform surfaces, and to track the evolving morphology of the ancient shoreface‐shelf. Our results suggest that shoreface‐shelf morphology varied considerably in response to processes that operate over a range of timescales. (1) Individual clinoform surfaces form as a result of enhanced wave scour and/or sediment starvation, which may be driven by minor fluctuations in relative sea level, sediment supply and/or wave climate over short timescales (10¹?10³ years). These external controls cannot be distinguished in vertical facies successions, but may potentially be differentiated by the resulting clinoform geometries. (2) Clinoform geometry and distribution changes systematically within a single parasequence, reflecting the cycle in sea level and/or sediment supply that produced the parasequence (10²?10⁵ years). These changes record steepening of the shoreface‐shelf profile during early progradation and maintenance of a relatively uniform profile during late progradation. Modern shorefaces are not representative of this stratigraphic variability. (3) Clinoform geometries vary greatly between different parasequences as a result of variations in parasequence stacking pattern and relict shelf morphology during shoreface progradation (10⁵?10⁸ years). These controls determine the external dimensions of the parasequence.     

The lacustrine sedimentary records of coal-burning atmospheric pollution

With the acceleration of industrialization, coal- burning atmospheric pollution is getting more and more serious in many regions in China. However, there are only about ten odd years literature records about pollution in some large and mid-sized cities, where the atmosphere has perhaps been polluted for several decades, and therefore it is difficult to know the process and characteristic of pollution, and diffi-cult to evaluate its damage to environment. Lacustrine sediment, a natural record w…