Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

岩体三维节点偶对分析及其应用

本文讨论了节点偶对分析的三维扩展。节点偶对分析是针对摩擦滑动节理单元的约束边界进行的序列矢量判定。在三维节理单元的分析中,几何约束和相应的力学判据极为复杂,采用节点偶对等效结合力方法才能迎刃而解。文中对三维转向节理模型的分析得到合理的结果,它表明本文所提出的方法可成功地应用于节理岩体的有限元分析。     

Design and Strength Analysis of A Spherical Connector for Lifting Subsystem in Deep Sea Mining System

1 .IntroductionThe lifting systemis composed of pipes andtheir connectors .It is not onlythe lifting channel formanganese nodule betweenthe miningship andintermediate bin,but alsothe supporting massfor deepsea miningequipment and cables .Sothe reliability…     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

盐碱水NaCl浓度和碱度对银鲫(Carassius auratus gibelio)幼鱼毒性的初步研究

通过对银鲫(Carassiusauratusgibelio)幼鱼(L=3.56±0.28cm)的NaCl浓度(pH=8.80±0.10)及碱度(pH=8.84±0.26)的急性毒性试验，用概率单位法求得其24，48，96h的半致死浓度(LC50值)NaCl浓度分别为11.53、10.77、8.58g/L；碱度分别为98.74、79.49、64.19mmol/L。在此基础上采用水生毒理联合效应相加指数法进行了氯化钠与碳酸氢钠浓度的联合毒性实验(浓度=11)，结果在96h内二者的关系全部为协同作用,且其协同性逐渐减弱并趋向于相加作用。     

非常规管节点疲劳寿命分析与计算

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。     

耿贝尔逻辑模型在极值风速和有效波高联合概率分布中的应用

首先介绍了耿贝尔逻辑模型，采用该模型对南海海域的涠州岛海洋站的风速和有效波高实测数据进行了分析，结果表明耿贝尔逻辑模型较好地描述了年极值风速和有效波高两随机变量的联合分布；采用得到的极值风浪联合概率分布推算了不同重现期的极值风速和波高，表明考虑风速和波高相关性对设计荷载的确定有显著影响。由于耿贝尔逻辑模型具有函数结构简单，参数估计方便，因此有望成为极值风速和波高联合分布的较理想概率模型。     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

胶南晚中生代大珠花岗岩岩体的脆性变形机制

在长期变化的构造应力作用下,胶南大珠山花岗岩岩体自早白垩世冷凝冷却以来发生强烈的脆性破裂变形,形成了多样的破裂类型如岩脉、节理和断层。在该岩体冷凝冷却早期侵入的细晶花岗岩脉和稍后形成的N-S向节理组反映出与同期区域构造应力场协调的N-S向挤压作用,而后伴随着揭顶剥蚀,出现了交替变化的构造应力场形成了岩体内主导的NW-NNW向和NE向节理组。整体上,恢复出的岩体内构造应力场发生顺时针方向旋转,最大水平挤压由早期的N-S向偏转为晚期的近E-W向。构造应力场的长期变化、平行节理作用和节理断层化作用造成了研究区复杂的破裂型式和破裂序列。