REE distribution in water-sediment interface system at deep ocean floor

ＲＥＥｄｉｓｔｒｉｂｕｔｉｏｎｉｎｗａｔｅｒ－ｓｅｄｉｍｅｎｔｉｎｔｅｒｆａｃｅｓｙｓｔｅｍａｔｄｅｅｐｏｃｅａｎｆｌｏｏｒ￥ＺｈａｎｇＬｉｊｉｅ；ＬｉｕＪｉｈｕａａｎｄＹａｏＤｅ（ＲｅｃｅｉｖｅｄＦｅｂｒｕａｒｙ１，１９９４；ａｃｃｅｐｔｅｄＭａｙ...     

自行式海底作业车的研究

理论分析和试验研究是本文写作基础，它详细地总结了大洋多金属结核资源开发而研究自行式海底作业车取得中期成果，它对我国大洋采矿和其它海底工程车辆的发展有着重要的文献价值和指导意义。     

兰州—白银多目标地球化学调查野外工作方法浅析

多目标区域地球化学调查从调查区表层、深层采样土壤元素分布特征入手建立土壤元素地球化学分配机制,以景观、地貌及地质特征为基础,选择合理的采样位置,正确的采样方法、采样层位,应用掌上机（Pocket PC）及数字填图系统（Rgmap）采集野外样品,本文以兰州—白银黄土覆盖区景观区为例,对表层、深层采样方法和技术要求进行探讨,对全省开展多目标地球化学调查,特别是野外工作方法提供借鉴。     

高位瓦斯抽放钻孔在降低综采工作面瓦斯浓度中的应用

林南仓属于低瓦斯矿井,但存在高瓦斯区域。煤层和采空区是瓦斯的主要来源,尤以采空涌出量大,给煤矿生产和安全带来了极大隐患。通过在1129综采工作面风道施工高位瓦斯孔,把钻孔打到采空区一侧煤层顶板以上冒落裂隙带内,用钻孔进行瓦斯抽放,使采空内的瓦斯通过裂隙带沿钻孔抽出,有效降低综采工作面瓦斯浓度,保证综采工作面正常回采和安全生产。     

焦煤集团九里山矿14101工作面突水治理浅析

通过对焦煤集团九里山矿14101工作面底板突水经过的研究,认为工作面底板突水的水源是是Lg灰岩水,其直接补给水源为L2灰岩水,间接补给水源为O2灰岩水;导水通道为底板采动裂隙带。采取了在工作面打水闸墙,利用钻孔对采空区灌注骨料,增加水流阻力,切断导水通道,封堵水源,加固隔水层的地面注浆和井下工程相结合的综合治水方案。通过观察,工作面中间巷无水流出,突水前后水位变化明显,在较短时间内获得了堵水成功。取得了显著的经济效益和社会效益,为矿井突水治理积累了经验。     

SVD和DCT提取特征向量的方法在人脸识别中的比较

采用奇异值分解和2D离散余弦变换两种方法得到的特征，分别在嵌入式隐马尔可夫模型的人脸识别中进行比较．得出奇异值分解比2D离散余弦变换在识别率上和时间复杂度上部较差的结果。通过对结果进行分析得出，虽然奇异值分解有很多优良的特性．但是在模式识别中仅使用奇异值分解来提取特征并不是很好的方法。     

单一滑面边坡的非稳定蠕变模型分析

对单一滑面边坡的非稳定蠕变分析是边坡稳定性研究的基础。文中对岩质边坡单一滑面的流变变形机制进行了分析，提出了一种能较好反映这一变形机制的非稳定蠕变模型。特别是描述单一滑面边坡的非稳定蠕变破坏阶段，并对其稳定性进行了讨论。结合一些工程实例进行了对比验证，为滑坡灾害的预测和防治提供依据。     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

桥梁隔震体系振动台试验研究(IV)——隔震桥梁的设计方法探讨

在前文模型试验的基础上 ,本文总结归纳了隔震桥梁的设计方法与设计流程 ,着重论述探讨了隔震桥梁的概念设计与细部构造设计应注意的问题     

Recent developments in seismically isolated buildings in Japan

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.