Smeared crack approach: back to the original track

This paper briefly reviews the formulations used over the last 40 years for the solution of problems involving tensile cracking, with both the discrete and the smeared crack approaches. The paper focuses on the smeared approach, identifying as its main drawbacks the observed mesh‐size and mesh‐bias spurious dependence when the method is applied ‘straightly’. A simple isotropic local damage constitutive model is considered, and the (exponential) softening modulus is regularized according to the material fracture energy and the element size. The continuum and discrete mechanical problems corresponding to both the weak discontinuity (smeared cracks) and the strong discontinuity (discrete cracks) approaches are analysed and the question of propagation of the strain localization band (crack) is identified as the main difficulty to be overcome in the numerical procedure. A tracking technique is used to ensure stability of the solution, attaining the necessary convergence properties of the corresponding discrete finite element formulation. Numerical examples show that the formulation derived is stable and remarkably robust. As a consequence, the results obtained do not suffer from spurious mesh‐size or mesh‐bias dependence, comparing very favourably with those obtained with other fracture and continuum mechanics approaches. Copyright © 2006 John Wiley & Sons, Ltd.     

Evaluation of three waterborne polymers as stabilizers for sandy soil

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.     

压裂井经济分析的优化方法

水力压裂是油气井增产的一项重要技术措施。压裂效果的经济评价，实际上是一个压裂设计的优化过程。研究经济问题即为研究压裂优化问题。提出了压裂井的施工费用计算方法和贴现率、净收入、净现值的计算公式，并对压裂井进行了经济分析，给出了压裂设计优化的步骤。建立了八屋—后五家户气田压裂经济评价模型，并应用到实际施工现场。使油气单井产量比过去增加2～3倍。     

液压传感间接测量水位计的研制及其应用

压力式水位计在水文自动测报系统中很难推广的主要原因是泥沙对传感器的影响,泥沙不但会使传感器测量精度达不到测验要求,而且由于泥沙淤积还会给水位计的日常维护带来很大不便。目前进口传感器测量精度高、稳定性能好,但仍避免不了泥沙的影响。针对这一问题,提出了一种新型压力式水位计———液压传感间接测量水位计,该水位计解决了泥沙对压力式水位计的影响,是一种具有很大发展前景的水位测量仪器。     

Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.     

火山岩坡残积土地区暴雨滑坡泥石流的形成机理

暴雨条件诱发的浅层坡残积土质斜坡破坏的机理受控于土体在低有效围压条件下的应力应变特性。1993年11月4～5日,香港大屿山地区特大局部性暴雨导致在120km2范围内产生自然滑坡泥石流800余处,且绝大多数发生于火山岩风化坡残积土地区。本文对火山岩风化坡残积土开展了室内偏压固结不排水剪和偏压固结常剪应力排水剪试验,揭示了该类土的应力应变特性;在此基础上,分析了暴雨滑坡泥石流的形成机理和过程。     

Water Self-Softening Processes at Waterfall Sites

Many rivers in tropical and subtropical karst regions are supersaturated with respect to CaCO3 and have high water hardness. After flowing through waterfall sites, river water is usually softened, accompanied by tufa formation, which is simply described as a result of water turbulence in fast-flowing water. In this paper, a series of laboratory experiments are designed to simulate the hydrological conditions at waterfall sites. The influences of air-water interface, water flow velocity, aeration and solid-water interface on water softening are compared and evaluated on a quantitative basis. The results show that the enhanced inorganic CO2 outgassing due to sudden hydrological changes occurring at waterfall sites is the principal cause of water softening at waterfall sites. Both air-water interface area and water flow velocity increase as a result of the "aeration effect", "low pressure effect" and "jet-flow effect" at waterfall sites, which greatly accelerates CO2 outgassing and therefore makes natural w     

WRF中土壤图及参数表的更新对华北夏季预报的影响研究

土壤质地及其物理性质的参数化对陆面过程模拟具有明显的影响。研究了土壤质地和土壤水文参数表的更新对WRF（Weather Research and Forecasting）模拟性能的影响。使用北京师范大学土壤属性数据集和修正后的土壤水文参数表替换WRF默认数据,对2017年6—8月华北地区开展数值模拟试验和评估验证。结果表明,模拟结果对土壤类型数据集和水文参数表的更新较为敏感,对地面要素预报有正效果。WRF默认土壤数据集中,中国东部以粘壤土为主,而在北京师范大学土壤数据集里则以壤土为主;修正后的土壤水文参数在Noah陆面过程中增强了裸土潜热蒸发能力。数值模拟试验表明,土壤输入数据和土壤水文参数的更新能够增强陆面向大气的潜热同时减弱感热输送,致使大气底层温度降低而湿度增大。利用华北区域748个地面气象观测站的2 m温度和2 m湿度对2017年夏季的模拟结果进行验证,结果显示更新试验对地面要素的预报偏差有较好的修正作用,能够将2 m温、湿度的预报技巧分别提高3.4%和2.9%。      

降雨条件下考虑饱和渗透系数变异性的边坡可靠度分析

土体饱和渗透系数表现为天然的变异性,为此基于Green-Ampt模型建立了考虑饱和渗透系数变异性的降雨入渗物理模型,并藉此模型确定了坡体湿润锋深度和含水率分布。然后结合无限长非饱和土边坡稳定模型得到解析形式的反映边坡稳定性的极限状态函数。采用Monte Carlo法对饱和渗透系数进行随机抽样并最终建立降雨条件下考虑饱和渗透系数变异性的边坡概率分析框架。针对一假想边坡,探讨了饱和渗透系数的变异系数、降雨持时和降雨强度对边坡破坏概率以及破坏发生时间概率分布的影响,结果表明：在降雨初期,边坡的破坏概率随饱和渗透系数变异性的增强而逐渐增加,但随着降雨的持续,破坏概率开始随变异性的增强而显著降低;滑坡最可能发生时间的大小并不受饱和渗透系数变异性的影响,而是直接取决于降雨强度;滑坡最可能发生时间所对应的概率却随变异性的增强而逐渐减小。