固定式海洋平台利用TLD的减震研究

本文研究固定式海洋平台利用调谐液体阻尼器（ＴｕｎｅｄＬｉｑｕｉｄＤａｍｐｅｒ，简称ＴＬＤ）减小地震反应的方法。首先探讨了调谐频率比、激磁频率比对减震效果的影响，在此基础上建立了ＴＬＤ——平台系统的力学模型和运动方程，通过数值计算验证了该方法的有效性     

Long-Term Effect of TMD on Vibration Control of An MDOF Offshore Fixed Platform

A three-dimensional fixed offshore platform in deep water modeled by the finite element method is studied in this paper. Analysis of the dynamic response of the MDOF structure is realized taking the non-linearity of the wave drag force and the wave-structure interaction into account. The structural response statistics, which have Gaussian distributions, are used to evaluate the vibration effect of the structure without TMD and with TMD. And an optimal method to design TMD controlling the first mode of the multi-mode structure is proposed. Moreover, the probabilities of occurrence of sea states at the platform site are considered for prediction of the long-term effect of a TMD. Simulation results demonstrate that the long-term effect of a well-designed TMD is good and the practical use is possible due to the good stability of its optimal parameters under different sea states.     

Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.     

桶形基础平台三维有限元稳定性分析

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。     

低围压水平下砂的排水行为(英文)

采用干样沉降法制备样品 ,选用静三轴仪对松砂和密砂样在 10 k Pa至 10 0 k Pa的低围压下的排水行为进行了实验研究 ,并对实验结果作了橡皮膜校正 ,在围压为 10 k Pa的密砂实验中 ,轴向应力的校正值可达到 12 %。实验研究表明低围压下松砂的剪胀性非常明显 ,且存在剪应力极值 ;围压越低 ,松砂和密砂的剪应力极值越小 ,达到最大剪应力所对应的剪应变越小。同时还表明低围压范围内相对密度不同 ,砂的应力应变特性不同 ;此外 ,低围压下砂的内摩擦角高于高围压下的值 ,从而在工程上应重视低围压水平下砂土工程参数的合理选取     

长期非平稳荷载调谐质量减振阻尼器优化设计

研究外荷载为长期非平稳随机过程。考虑长期荷载的特性 ,采用 1个概率谱密度函数来反映长期非平稳随机荷载及其特征 ;概率谱密度函数是基于大量的一般谱密度函数的统计特性获得。以延长结构的抗疲劳使用寿命为目标函数 ,提出了调谐质量减振阻尼器的优化设计方法 ,这在实际工程中有着极为广阔的应用前景。本文旨在从理论上发展长期非平稳随机荷载作用下调谐质量减振阻尼器的优化设计方法 ;文中采用长期波浪实测数据 ,给出了 1个数值算例说明整个设计过程。     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

Study of a semi‐active stiffness damper under various earthquake inputs

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

耗能减震结构的受力分析与层间弹塑性变形简化计算方法

本文研究了安装粘弹性耗能器结构在常遇地震作用下层间最大剪力的分配情况 ,给出了层间最大剪力在结构构件与耗能器之间按刚度分配原则进行假想分配后 ,所得假想层间构件力与层间最大构件力之间的关系 ,以及假想层间附加力与层间最大附加力之间的关系 ,探讨了罕遇地震作用下安装粘弹性耗能器结构与安装软钢耗能器结构的层间弹塑性变形简化计算方法。