Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Age estimates of coastal terraces in the Andaman and Nicobar Islands and their tectonic implications

The great Indian Ocean earthquake of December 26, 2004 caused significant vertical changes in its rupture zone. About 800 km of the rupture is along the Andaman and Nicobar Islands, which forms the outer arc ridge of the subduction zone. Coseismic deformation along the exposed land could be observed as uplift/subsidence. Here we analyze the morphological features along the coast of the Andaman and Nicobar Islands, in an effort to reconstruct the past tectonics, taking cues from the coseismic effects. We obtained radiocarbon dates from coastal terraces of the island belt and used them to compute uplift rates, which vary from 1.33 mm yr^− 1 in the Little Andaman to 2.80 mm yr^− 1 in South Andaman and 2.45 mm yr^− 1 in the North Andaman. Our radiocarbon dates converge on  600 yr and  1000 yr old coastal uplifts, which we attribute to the level changes due to two major previous subduction earthquakes in the region.     

山溪性可冲性强潮河口曹娥江高水位初步研究

应用多年的实测资料 ,分析了曹娥江河口高水位成因 ,结果表明 ,曹娥江河口洪水位具有山溪性和可冲性的特点 ,人类活动对高水位有较大影响。应用统计分析法和成因分析法推求 1 %设计高水位 ,讨论了成因分析法中上、下边界条件的选取 ,其选取原则对其他潮汐河口确定设计高水位具有借鉴意义     

Nonlinear dynamic analysis of deep water risers

The paper presents a theoretical and numerical approach to the dynamical behaviour of risers in deep water which takes into account two types of nonlinearity; that due to viscous drag forces and that due to the large displacements of the riser when submitted to strong axial loads. As the second nonlinearity may have a significant influence upon the behaviour of risers in deep water, a method for automatically updating the structural geometry during the dynamic analysis is given. A computer programme has been written for this purpose.     

断阶型潜山带地质模型的建立及储层预测--以CG20潜山为例

以 CG2 0潜山为例 ,从建立地质模型入手 ,包括地层模型、构造模型、储集模型、储盖组合模型、速度模型等 ,认识到各套地层分布和储层物性的差异均与地震响应密切相关 ,因此可以利用地震波的信息 ,预测潜山储层的发育及分布情况。在对 CG2 0潜山进行精细全三维构造解释的基础上 ,探讨性地应用了测井约束反演、吸收系数、相干分析及三维模式识别等技术 ,对潜山储层进行了预测 ,从而提高了潜山勘探的效益 ,并为类似断阶型潜山带的勘探提供了成功的经验 ,具有一定的指导意义。     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.     

海洋环境荷载下输液立管的静、动力特性研究

考虑管内流动流体和管外海洋环境荷载共同作用 ,建立海洋立管侧向运动微分方程。用Hermite插值函数离散 ,在微机上编写海洋立管静、动力分析程序 ,通过计算分析研究管内流体对立管侧向变形和应力的作用 ;另外 ,探讨管内流体的流动速度和立管顶端的预张力对立管动力特性的影响。结果表明 ,立管变形和应力均随管内流体流动速度增加而增大 ,同时内流速度的增大会降低立管的固有频率 ,但适当增大立管顶端预张力会抵消内流流速增加引起的固有频率下降。     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

镇泾地区延长组河流相砂体分布与圈闭形成的关系研究

鄂尔多斯盆地镇泾地区侏罗系地层以三角洲-湖泊沉积体系为主,研究区范围内主要发育主河道和部分分流河道砂体。研究区构造平缓,主要为单斜地层、在东南部存在大型鼻状构造。通过对主要储层段(长6、8油层组)砂体分布及与构造之间关系进行研究,分析砂体走向与构造线方向的关系认为在构造单斜地区,当两者相交时(交角β≠0)是形成圈闭的关键因素之一,在大型鼻状构造地区因构造线的弯曲与河道砂体组合可以形成圈闭。根据研究区砂体分布和构造线组合出4种地层-岩性及岩性圈闭。利用构造图与砂体分布图对主要储层段存在的圈闭确定出长6、8油层组10个层圈闭。     

相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.