A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.     

移动式海上基地(MOB)连接器动力响应试验研究

移动式海上基地(Mobile Offishore Base，MOB)是由若干半潜模块相连而成的超大型浮式结构物。在进行海上作业时，模块间的连接器将会产生巨大的载荷。用缩尺比为1：100的三模块MOB模型在实验室进行了连接器动力响应试验研究。文中对试验的关键问题，如连接器模型的设计、制作、安装、试验工况的确定和测试方法等作了较详细的介绍。     

Performance of hemi-cylindrical and rectangular submerged breakwaters

A parametric experimental study is conducted to compare the reflection and transmission characteristics of submerged hemi-cylindrical and rectangular rigid and water-filled flexible breakwater models. The results show that, for the rigid breakwaters, rectangular models are more effective than hemi-cylindrical ones in terms of reduction of transmitted waves. As for the flexible breakwaters, the hemi-cylindrical models may give better wave reflection than rectangular ones. However, the energy loss induced by the rectangular breakwaters is much larger and more significant to result in an overall better efficiency in terms of reduction in wave transmission. The effects of internal pressure show that the lowest pressurized flexible models considered in this work are the most effective in the reduction of the transmitted wave height. Higher wave reflection, lower wave transmission and higher energy loss are obtained consistently at the lower submergence depth ratio.     

溪洛渡水电站坝址区岩体蠕变特性试验研究

介绍了溪洛渡水电站坝址区岩体柔性板法蠕变试验方法及试验结果,给出了岩体蠕变模型及其参数,为工程设计提供了参考依据。     

塔里木西南早第三纪古地磁和地壳缩短

属于帕米尔弧山前带的乌帕尔剖面和属于南天山山前带的巴对布拉克剖面，现今的纬度差为０．５６°，但是下第三系古地磁测定结果表明其古纬度差很大．乌帕尔剖面齐姆根组上部的古纬度为８°Ｎ，而巴什布拉克剖面巴什布拉克组第５段的古纬度为３６．１°Ｎ。若考虑到当时板块的相对运移速度，估计始新世早期巴什布拉克地区的古纬度大致为３１°Ｎ，与当时乌帕尔所处位置的纬差达２３°。又根据Ｋｌｏｏｔｗｉｊｋ测得的帕米尔西北缘利什坦层的古纬度值，在始新世末期．包括乌帕尔在内的帕米尔前缘与以巴什布拉区为代表的南天山山前带之间还有至少１０°的纬度差。古地磁资料表明，始新世早期，塔里木海宽达２０００ｋｍ，此时印度板块西北端已与欧亚板块局部碰撞，至始新世末，印度板块向北推进２０°，帕米尔弧前缘与南天山山前的距离缩短到约１０００ｋｍ，原塔里木海的两侧上升为山前平原。     

桩长及水泥掺入量对柔性桩承载力等的影响

采用弹性无限半空间体内的Mindlin应力解和分层总和法，计算分析了柔性桩的荷载传递规律，较详细地讨论了桩长、固化剂（水泥）掺入量对柔性桩复合地基承载力、变形的影响。计算值与实测值比较吻合。     

印度-澳大利亚板块应力场数值模拟及其动力学分析

印度-澳大利亚板块的边界类型和性质十分复杂。本文采用伪三维有限元方法,利用WSM2000观测应力场数据的应力取向和应力状态作为主要约束,建立了印度-澳大利亚板块岩石层三维模型,对印度-澳大利亚板块构造应力场进行了数值模拟,进而探讨印度-澳大利亚板块所受边界力对板块内部应力场的影响。结果显示,印度-澳大利亚板块的构造应力场主要受到两个因素的控制:①软流层静压推力;②来自碰撞带的阻力,包括喜马拉雅、巴布亚新几内亚、新西兰和印度-澳大利亚板块与欧亚板块的西北边界。而来自俯冲消减带的拉张作用力对板内应力场的作用相对较小。