The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

新型组合连梁控制结构体系

分析了连梁在水平力作用下的破坏机制，对连梁结构体系的发展及结构抗震控制进行了评述，在此基础上提出一种新型组合连梁控制结构体系，并对其进行了概念分析，提出了有待研究的若干关键问题。     

Cyclic tests on large‐scale models of existing bridge piers with rectangular hollow cross‐section

Cyclic tests on two large‐scale models of existing bridge piers with rectangular hollow cross‐section were performed in the ELSA laboratory. The prototype structure is an existing reinforced concrete highway bridge constructed in Austria in 1975. The piers presented several seismic deficiencies and consequently they showed poor hysteretic behaviour and limited deformation capacity as well as undesirable failure modes that do not comply with the requirements of modern codes for seismic‐resistant structures. Experimental data are compared to numerical and empirical predictions. Copyright © 2003 John Wiley & Sons, Ltd.     

复合纤维加固钢筋混凝土梁受剪性能试验研究

对14根钢筋混凝土矩形梁进行抗剪加固试验，研究在受剪区粘贴高强复合纤维的加固效果和设计方法。主要分析了纤维粘贴量、包裹方法和剪跨比等因素对钢筋混凝土加固梁受剪性能的影响和作用。对试验梁进行了全过程分析，并基于试验结果，提出了抗剪加固设计中复合纤维设计应变的合理取值和计算公式，阐述了具体加固设计模型和设计方法。     

Modelling the flow of self‐compacting concrete

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.     

Origin of abundant moonmilk deposits in a subsurface granitic environment

Subsurface granitic environments are scarce and poorly investigated. A multi‐disciplinary approach was used to characterize the abundant moonmilk deposits and associated microbial communities coating the granite walls of the 16th Century Paranhos spring water tunnel in Porto city (north‐west Portugal). It is possible that this study is the first record of moonmilk in an urban subsurface granitic environment. The morphology and texture, mineralogical composition, stable isotope composition and microbial diversity of moonmilk deposits have been studied to infer the processes of moonmilk formation. These whitish secondary mineral deposits are composed of very fine needle‐fibre calcite crystals with different morphologies and density. Calcified filaments of fungal hyphae or bacteria were distinguished by field emission scanning electron microscopy. Stable isotope analysis revealed a meteoric origin of the needle‐fibre calcite, with an important contribution of atmospheric CO ₂, soil respiration and from weathering of Ca‐bearing minerals. The DNA ‐based analyses revealed the presence of micro‐organisms related to urban contamination, including Actinobacteria, mainly represented by Pseudonocardia hispaniensis , Thaumarchaeota and Ascomycota, dominated by Cladosporium . This microbial composition is consistent with groundwater pollution and contamination sources of the overlying urban area, including garages, petrol stations and wastewater pipeline leakage, showing that the Paranhos tunnel is greatly perturbed by anthropogenic activities. Whether the identified micro‐organisms are involved in the formation of the needle‐fibre calcite or not is difficult to demonstrate, but this study evidenced both abiotic and biogenic genesis for the calcite moonmilk in this subsurface granitic environment.     

Non-stationary random vibrations of a shear beam under high frequency seismic effects

Band-limited, non-stationary random vibrations of a shear beam are studied in order to investigate high frequency seismic effects on building structures. A solution for the evolutionary spectral density of the shear beam response to a time segment of band-limited white noise is given in a closed form. The root mean square (rms) and peak response of the shear beam are studied for two characteristic frequency bands: the conventional 1–4 Hz and higher frequency 4–16 Hz, characteristic for rockburst ground motion. Applying the criterion of equal excitation intensity with constant rms velocity, both responses are analyzed in detail and compared. The “switching off” fundamental mode for high frequency excitations results in characteristic overshoot of the stationary response level by the non-stationary rms response and an amplification of the response in the upper part of the shear beam.     

Gaussian beams in inhomogeneous media: A review

The paper outlines the most important results of the paraxial complex geometrical optics (CGO) in respect to Gaussian beams diffraction in the smooth inhomogeneous media and discusses interrelations between CGO and other asymptotic methods, which reduce the problem of Gaussian beam diffraction to the solution of ordinary differential equations, namely: (i) Babich’s method, which deals with the abridged parabolic equation and describes diffraction of the Gaussian beams; (ii) complex form of the dynamic ray tracing method, which generalizes paraxial ray approximation on Gaussian beams and (iii) paraxial WKB approximation by Pereverzev, which gives the results, quite close to those of Babich’s method. For Gaussian beams all the methods under consideration lead to the similar ordinary differential equations, which are complex-valued nonlinear Riccati equation and related system of complex-valued linear equations of paraxial ray approximation. It is pointed out that Babich’s method provides diffraction substantiation both for the paraxial CGO and for complex-valued dynamic ray tracing method. It is emphasized also that the latter two methods are conceptually equivalent to each other, operate with the equivalent equations and in fact are twins, though they differ by names. The paper illustrates abilities of the paraxial CGO method by two available analytical solutions: Gaussian beam diffraction in the homogeneous and in the lens-like media, and by the numerical example: Gaussian beam reflection from a plane-layered medium.     

A non‐baseline algorithm for damage locating in flexural structures using dynamic distributed macro‐strain responses

The concept of distributed strain‐sensing techniques has been proposed in our recent research, which was dedicated to utilizing the strain distributions throughout the full or partial areas of structures to detect arbitrary and unforeseen damage. An algorithm not requiring a detailed analytical model is presented for damage locating in flexural structures through the direct use of dynamic responses recorded by distributed long‐gauge strain sensors. The modal macro‐strain vector (MMSV), which has been proven to have a mapping relation with displacement mode shape, can be extracted directly from macro‐strain time‐series data, from which a damage evaluating index can be derived and used as an indicator for locating damage. Numerical examples are simulated to verify the sensitivity and effectiveness of the index in different cases. Furthermore, experimental investigations on a cantilevered beam with various long‐gauge fibre optic sensors placements are carried out to examine the feasibility and applicability of the proposed method. Copyright © 2007 John Wiley & Sons, Ltd.