The second order characteristic condition for plastic flow

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.     

△T球体异常的三元解释法

在△Ｔ异常解释课题中，一个新的角度参量─—视磁化特征角的拟定，最大限度地简化了球体磁场表达式。从而才有可能通过特殊解法，给出了球体磁场的极值与拐点公式。作者据此建立了四种不受正常场制约、仅需异常的局部持征曲线即可全面解释三度异常的解释方法。屏障分解、叠加判别、三元迭代的设计，为解释三度体叠加异常给出了简单而易行的途径。     

大气垂直折射与时序垂直角值的谱分析

本文介绍了对时序垂直角观测值进行谱分析的方法和所得到的结论。使以往对于大气折射影响及其变化规律的定性认识得以定量化。     

存储式岩心定向取心技术应用研究

采用岩心定向取心技术不仅可以迅速而方便地确定地下矿层和结构面的产状,而且还可以判断矿层的走向,了解地层倾向,预测钻孔弯曲的趋势。介绍了存储式岩心定向取心原理、关键技术问题、器具构成、技术参数以及现场应用情况。     

The optimum control of thruster system for dynamically positioned vessels

An offshore vessel with a dynamic positioning system (DP system) needs fast response to produce thrust to counteract the environmental forces acting on it for the purpose of maintaining its position and heading as close as possible to the working position. Therefore, quick and effective modulation of the thrust is the problem to determine the thrust and the rotation angle of the thruster devices of the ship. This paper presents an effective optimum control for a thruster system, using the sequential quadratic method to achieve economical and effective modulation of the thrust and the direction of the thruster. An optimum control study of a 2280 tons DP coring vessel with five rotary azimuth thruster marine positioning is studied in detail, which can quickly and exactly estimate the thrusts and angles of direction of all the thrusters. The results can provide a valuable thruster system for a dynamically positioned vessel.     

大鹏澳水域秋季浮游植物优势种的演替及其与春季的比较

根据2002年11月在亚大湾大鹏澳进行的连续30d(每日采样一次)观测资料，运用主成分分析和多元回归分析相结合方法，分析大鹏澳非养殖区中各浮游植物优势种之间的关系及影响其生长与演替的主要理化因子．建立秋季浮游植物优势种演替模型，并与春季的大鹏澳现场调查建立的浮游植物优势种演替模型进行比较，分析生境变化(降雨)对浮游植物优势种演替过程的影响。结果表明，春，秋季浮游植物优势种发生不同的演替过程。春季浮游植物对资源的竞争较为激烈，大量降雨引起海水中营养盐浓度升高，促进并维持中肋骨条藻(Skeletonema costatum)高密度生长，待营养盐被大量消耗后，中肋骨条藻数量下降，减轻了对柔弱菱形藻(Nitzschia delicatissima)的生长压力而使其成为优势种；而秋季水温较低，浮游植物细胞数量较春季大为减少，中肋骨条藻和柔弱菱形藻对资源的竞争较为缓和，使外界环境变化成为影响优势种变化的主要原因；降雨期间虽然营养盐增加，但环境变化使浮游植物的生长受到限制，雨后柔弱菱形藻数量不能恢复，水体中高营养盐浓度促使中肋骨条藻出现生长峰值。     

低围压水平下砂的排水行为(英文)

采用干样沉降法制备样品 ,选用静三轴仪对松砂和密砂样在 10 k Pa至 10 0 k Pa的低围压下的排水行为进行了实验研究 ,并对实验结果作了橡皮膜校正 ,在围压为 10 k Pa的密砂实验中 ,轴向应力的校正值可达到 12 %。实验研究表明低围压下松砂的剪胀性非常明显 ,且存在剪应力极值 ;围压越低 ,松砂和密砂的剪应力极值越小 ,达到最大剪应力所对应的剪应变越小。同时还表明低围压范围内相对密度不同 ,砂的应力应变特性不同 ;此外 ,低围压下砂的内摩擦角高于高围压下的值 ,从而在工程上应重视低围压水平下砂土工程参数的合理选取     

Model Test Study of Dynamic Ice Force on Compliant Conical Structures

To study ice-induced vibration of a compliant conical structure,a series of model tests were performed from 2004 to 2005.In the tests,the ice sheet before the compliant conical structure was found to fail in two-time breaking.From 2005 to 2006,this type of ice failure was studied through more groups of tests.The tests show that two-time breaking is the typical failure of ice before steep conical structures,and is controlled by other factors at the same time,such as ice speed and the angle of the cone.     

16米风化砂回填地基的深层振密加固

结合北方某重力式深水 ( -1 6.0 m)码头沉箱后壁 1 4.5 m范围的回填风化砂经深层振密处理这一工程实例 ,介绍了回填砂振密的技术要求、施工工艺和方法及振密效果的检测。同时对施工与检测中的某些技术问题提出了自己的看法。