A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Revisiting the existence of an effective stress for wet granular soils with micromechanics

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.     

A continuum‐discrete hydromechanical analysis of granular deposit liquefaction

A coupled continuum‐discrete hydromechanical model was employed to analyse the liquefaction of a saturated loose deposit of cohesionless particles when subjected to a dynamic base excitation. The pore fluid flow was idealized using averaged Navier–Stokes equations and the discrete element method was employed to model the solid phase particles. A well established semi‐empirical relationship was utilized to quantify the fluid–particle interactions. The conducted simulations revealed a number of salient micro‐mechanical mechanisms and response patterns associated with the deposit liquefaction. Space and time variation of porosity was a major factor which affected the coupled response of the solid and fluid phases. Pore fluid flow was within Darcy's regime. The predicted response exhibited macroscopic patterns consistent with experimental results and case histories of the liquefaction of granular soil deposits. Copyright © 2004 John Wiley & Sons, Ltd.     

平凉隐伏岩溶水环境同位素研究

地下水资源可持续利用的一个急待解决的重要问题,是对地下水补给和更新能力的评价.利用环境同位素技术研究地下水的补给和可更新性是当前较为新颖的方法之一.在西北干旱、半干旱的隐伏岩溶地区,地下水埋藏条件复杂,常规的地质勘探方法所能提供的水文地质信息有限,环境同位素方法在研究地下水的补给及可更新能力方面发挥了优势,可对传统方法进行补充和验证.其结果表明,研究区隐伏岩溶水形成较早,且有大量现代水的混入,平均混入量为54%.说明区内隐伏岩溶水的补给和更新能力较好.环境同位素分析结果还显示,大岔河隐伏岩溶水为一相对独立、半开放的水文地质单元,其补给来源部分为流域内大气降水、地表水的补给,部分为东南部三道沟岩溶地下水的补给;根据环境同位素EPM模型计算,地下水的滞留时间为36 a.地下水储存量为1.314×108 m3; 储水系数为7.29×10-3.这一结果与传统勘探方法的计算结果基本吻合,说明环境同位素方法的实用性.     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

地下水资源开采潜力评价的综合因素浅析

浙江省现有地下水开采潜力的分析与评价方法存在着不足,本文结合乐清市地下水资源开发利用规划实例,浅析浙江省地下水资源开采潜力分析与评价的综合影响因素.     

复杂模型重力位场快速正反演方法及应用

提要 本文详细讨论了一种三维重力位场快速正反演方法。作者在前人工作的基础上,对算法作了行之有效的改进,通过对反演中的不稳定因素进行各种理论模型试算,得出保证迭代反演稳定收敛的准则,编制出可在微型机IBM—PC上运行的人机对话式自动正反演程序。本文还对各种不均质模型进行了模似计算并将该方法应用于某含油气沉积盆地的双层界面构造研究,揭示出了储油有利地段。     

APPLICATION OF GEOGRAPHICAL PARAMETER DATABASE TO ESTABLISHMENT OF UNIT POPULATION DATABASE

Now GIS is turning into a good tool in handling geographical, economical, and population data, so we can obtain more and more information from these data. On the other hand, in some cases, for a calamity, such as hurricane, earthquake, flood, drought etc., or a decision-making, such as setting up a broadcasting transmitter, building a chemical plant etc., we have to evaluate the total population in the region influenced by a calamity or a project. In this paper, a method is put forward to evaluate the population in such special region. Through exploring the correlation of geographical parameters and the distribution of people in the same region by means of quantitative analysis and qualitative analysis, unit population database (1km× 1km) is established. In this way, estimating the number of people in a special region is capable by adding up the population in every grid involved in this region boundary. The geographical parameters are obtained from topographic database and DEM database on the scale of     

An approach to quantitative analysis of regional economic links

Aimed at promoting regional coalitions and expanding the approach to economic links, this paper puts forward some new concepts such as link intensity and receiving coefficient, expounds the indexes of quantitative analysis of economic links and establishes the quantitative-analysis model of economic links. With help of the model, this paper calculates the values of the link intensities between Su-Xi-Chang (Suzhou-Wuxi-Changzhou) region and Shanghai, and analyzes the regional difference of the economic links.     

星际A型CH_3CH－H_2含超精细能级的碰撞跃迁速率系数的理论计算

本文作者利用ＩＯＳ近似模型，计算了星际分子云条件下Ａ型ＣＨ３ＣＮ－Ｈ２含超精细能级的碰撞跃迁速率系数。温度范围是２０Ｋ－１４０Ｋ。为研究分子云与恒星形成区的物理、化学性质提供了有用的基础分子数据。