Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Fatigue Behavior of Plain Concrete Under Biaxial Compression: Experiments and Theoretical Model

The effects of different lateral confinement stress on the fatigue behavior of and cumulative damage to plain concrete are investigated experimentally. Eighty 100 mm x 100 mm x 100 mm specimens of ordinary strength concrete are tested under constant- or variable-amplitude fatigue loading and lateral confinement pressure in two orthogonal directions. A fatigue equation is developed by modifying the classical Aas-Jakobsen S-N equation for taking into account the effect of the confined stress on fatigue strength of plain concrete. The results of variable-amplitude fatigue tests indicate that the linear damage theory proposed by Palmgren and Miner is unreasonable in the biaxial stress state. A nonlinear cumulative damage model that could model the effects of the magnitude and sequence of variable-amplitude fatigue loading and lateral confinement pressure is proposed on the basis of the evolution laws of the residual strains in the longitudinal direction during fatigue tests. The residual fatigue life predic     

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。     

Comparison of Strain-rate Dependent Stress-Strain Behavior from Ko-consolidated Compression and Extension Tests on Natural Hong Kong Marine Deposits

This article presents results from a series of K_o-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven K_o-consolidated triaxial tests were conducted including four compression tests and three extension tests. After K_o-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

一种结合整型最佳谱间预测与SPIHT的MODIS影像无损压缩算法

针对MODIS(Moderate Resolution Imaging Spectroradiometer)影像数据海量并具有重要研究价值的特点,研究MODIS影像的无损压缩算法。采用最佳线性预测方法,通过波段相关性排序确定波段最优预测顺序,并自适应计算"预测波段"与"当前波段"的二阶最佳预测器系数,减少谱间冗余;以多级树集合分裂树(Set Partitioning In Hierarchical Trees,SPIHT)编码算法降低谱内相关。为确保无损压缩,对线性预测系数进行最佳逼近取整操作,并采用基于提升格式的D5/3整数小波变换。实验结果表明本文提出的算法在压缩比上性能较3DSPIHT等算法突出。     

DCT域遥感影像融合算法

提出一种基于离散余弦变换(Discrete Cosine Transform,DCT)与IHS变换的多光谱与全色遥感影像融合方法及其改进算法。本文方法依据DCT系数的特点在DCT域进行遥感影像融合,适合压缩格式的遥感影像快速融合。目视效果与客观评价表明,相比常用遥感影像融合方法,本文方法能在提高空间分辨率与保持光谱特性之间得到更好的折衷。     

吉林台爆破料应力应变关系的三轴试验研究

通过室内大型三轴实验，研究了吉林台水库爆破料在不同级配下的应力应变关系，得到了在一定击实功下爆破料的最大干密度随细料含量变化的规律，分析了爆破料在不同级配和不同围压下应力与应变的变化规律、轴向应变与体积应变的关系及抗剪强度变化特性．从微观的角度说明了变化规律产生的原因，得出爆破料的抗剪强度随级配的变化而变化的规律．     

基于立体补偿的遥感立体像对压缩方法

提出研究遥感立体像对的压缩问题。主要讨论了左右影像的视差补偿和辐射补偿。针对遥感立体像对视差分布不均以及左右影像存在辐射差的特点,提出了一种基于立体补偿的遥感立体像对压缩算法。该算法以左片为基准图像,采用自适应视差估计计算出右片的视差矢量,结合辐射校正和重叠块视差补偿技术得到平滑的右片的预测图像,以右片减去预测图像得到残差图像,然后采用小波压缩算法对残差图像进行压缩。实验结果表明,该算法能显著提高遥感立体像对的压缩性能。