港口靠船桩工作性状计算的双参数法

港口靠船桩是承受重复性荷载或多循环荷载的一种横向承载桩。双参数法能较好地描述靠船桩 (单桩、群桩 )的桩土工作性状。用双参数法进行计算时 ,所给的地面条件必须由重复荷载或多循环荷载作用下实测出来。根据现场试桩资料 ,标定桩土参数 ,即k =mx1/n的指数l/n、桩土相对柔度系数α、桩土综合刚度EI等值 ,可以用来设计试桩附近局部地区同类条件下的其它长桩。对于没有进行试桩的某些工程 ,可以联合运用双参数法和p -y曲线法进行桩的分析     

An Experimental Study of Several Special Issues Regarding the Ice Force on Conical Structures

The effect of the cone spacing of a conieal structure on the ice force is studied by model experiments. The ice force reduction coefficient presented in this paper expresses the relationship between the ice force and the arrangement of cones. The experiments prove that the mode of the ice failure before the boundary of upward-downward bending cone (UDBC) is crushing. A conclusion can also be drawn from the experiments that the ice force on the boundary of UDBC is by far less than that on a vertical pile with the same diameter. Moreover, the ice force frequencies on upright and inve-rted cones are obtained under the field condition of the platform JZ20-2, respectively. The results show that the alterna-tion of the ice force on UDBC can hardly induce resonance of platform JZ20-2.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

Strength Analysis of Turret Mooring Productive/Storage Tanker

The longitudinal strength of turret mooring productive/storage tanker is studied.A numeri-cal example has been implemented according to the method presented in this paper to give practical il-lustration.From the results of the numerical example,it is concluded that the turret hole located near theforward of the amidships has small effect on the longitudinal strength of the ship hull.As for design ex-treme value of wave bending moment of storage tanker,statistic method is a more reasonablemethodology,especially with the consideration of the servere environmental conditions.The primary esti-mation of design section modulus of turret storage tanker can be determined by this design bending mo-ment.     

Proportioning earthquake‐resistant RC frames in central/eastern U.S.

A maximum allowable period criterion is used to determine reasonable stiffness requirements for reinforced concrete frames with the seismicity associated with central and eastern U.S. A general relationship is developed to describe the displacement demand expected for central and eastern U.S. based on a survey of available ground motions, opinions of seismologists, and code‐based provisions. A series of hypothetical reinforced concrete frames is proportioned using a maximum allowable period criterion and evaluated for expected maximum displacement response using non‐linear dynamic analyses and a suite of ground motions. Results indicate that for the reinforced concrete structural systems considered in the study, proportioning for gravity loads will provide sufficient stiffness in central and eastern U.S. Copyright © 2002 John Wiley & Sons, Ltd.     

A non-linear stress-stiffness model for geomaterials at small to intermediate strains

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.     

Eocene paleomagnetism of the Caucasus (southwest Georgia): oroclinal bending in the Arabian syntaxis

The Caucasus is very important for our understanding of tectonic evolution of the Alpine belt, but only a few reliable paleomagnetic results were reported from this region so far. We studied a collection of more than 300 samples of middle Eocene volcanics and volcano-sedimentary rocks from 10 localities in the Adjaro–Trialet tectonic zone (ATZ) in the western part of the Caucasus. Stepwise thermal demagnetization isolates a characteristic remanent magnetization (ChRM) in 19 sites out of 31 studied. ChRM reversed directions prevail, and a few vectors of normal polarity are antipodal to the reversed ones after tilt correction. The fold test is positive too, and we consider the ChRM primary. Analysis of Tertiary declinations and strikes of Alpine folds in the Adjaro–Trialet zone and the Pontides in Northern Turkey shows a large data scatter; Late Cretaceous data from the same region, however, reveal good correlation between paleomagnetic and structural data. Combining Late Cretaceous and Tertiary data indicates oroclinal bending of the Alpine structures which are locally complicated with different deformation. The overall mean Tertiary inclination is slightly shallower than the reference Eurasian inclination recalculated from one apparent polar wander path (APWP), but agrees with other. This finding is in accord with geological evidence on moderate post-Eocene shortening across the Caucasus. We did not find any indication of long-lived paleomagnetic anomalies, such as to Cenozoic anomalously shallow inclinations further to the east in Central Asia.     

考虑轴向变形、双轴弯曲耦合效应的钢筋混凝土柱的弹塑性分析

在实际地震作用下，高层，特别是高宽比较大的高层结构中，由于倾覆力矩的作用、柱子、特别是外边柱所受轴力的变化将不可忽略。轴向变形与双轴弯曲的耦合作用，将是柱子塑性变形的显著特征。基于材料本构关系的“纤维模型”，能较精确地反映轴向变形，双轴弯曲三者之间的耦合作用。一组钢筋混凝土柱子双轴压弯的计算结果与试验结果的比较，证明了“纤维模型”的有效性和精确性。