A numerical investigation of the destruction of peroxy radical by Cu ion catalysed reactions on atmospheric particles

To determine if Cu mediated reactions on atmospheric particles are important to HO₂ chemistry in the ambient atmosphere, Cu molalities were calculated from measured Cu aerosol particle concentrations, mass and number size distribution data from a site in central Sweden. A comparison of characteristic times indicates that at low relative humidities the reaction is limited by the mass transport of gas phase HO₂ to the particle surface and not by the chemical kinetics of the aqueous reaction. Comparison of half-lives for particle reactions and the gas phase destruction of HO₂ to form H₂O₂ indicate that heterogeneous reactions on aerosol particles may have important consequences on the chemistry of HO₂ and H₂O₂ in the troposphere.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Inhomogeneous substrate analysis using EM300 backscatter imagery

Backscatter reflectivity from multibeam echo-sounders provides a powerful tool to efficiently characterize seafloor substrates. A comprehensive EM300 bathymetric and backscatter survey has been completed of Cook Strait, in central New Zealand. This paper presents a detailed analysis of the realtime corrections applied to the raw EM300 multibeam data and additional corrections required to compute angular variations of the backscatter strength. The corrections, including the local absorption coefficient, the influence of seafloor topography and sound refraction in the water column, are determined for different Cook Strait seafloor substrates. Modifying MB-System software code, we extracted the backscatter signal parameters in order to quantify the raw backscatter strength and apply additional processing. Profiles of backscatter strength versus incidence angle were computed for a variety of sites characterized by flat seafloor and homogeneous substrates, and for which ground-truth data were available. For each homogeneous site, different but characteristic backscatter profiles are observed that can be interpreted in terms of sediment facies. To analyze heterogeneous substrates, we present a statistical technique, based on a 3-dimensional distribution of (incidence angle, backscatter strength) couples that preserves geological information of the substrate components. This analysis, using backscatter data acquired on a submarine volcano, north of New Zealand, clearly differentiates soft sediments and lava flows within a heterogeneous substrate.     

气溶胶的光学厚度与反射率比的处理方法

气溶胶光学厚度与气溶胶反射率比都是大气校正所需的重要大气参数，同时也是海洋水色卫星主要的数据产品，它们的测量精度将直接到卫星数据产品正演的精度和卫星数据产品的应用。文章在简述气溶胶光学厚度与气溶胶反射率比的基本测量原理和处理方法的基础上，结合多次试验数据结果进行简要的评价。     

Atmospheric input of trace elements to the western Pacific Ocean and the Kuroshio ocean area

ＡｔｍｏｓｐｈｅｒｉｃｉｎｐｕｔｏｆｔｒａｃｅｅｌｅｍｅｎｔｓｔｏｔｈｅｗｅｓｔｅｒｎＰａｃｉｆｉｃＯｃｅａｎａｎｄｔｈｅＫｕｒｏｓｈｉｏｏｃｅａｎａｒｅａ￥ＱｉａｎＦｅｎｌａｎ；ＹｕＨｏｎｇｊｉａｎ；ＬａｎＹｏｕｃｈａｎｇ；ＣｈｅｎＺｈｉ；Ｚｈｏｕ...     

斑鳢(Channa maculata)微囊藻毒素去毒相关基因sGST的克隆与序列分析

采用RT-PCR技术和RACE技术成功克隆淡水鱼类斑鳢sGST基因cDNA全序列,推测得到氨基酸序列,初步分析其结构功能域及系统进化关系。结果表明,斑鳢sGST基因cDNA序列全长为898bp,编码225个氨基酸。斑鳢sGST与真鲷、金头鲷、鲽、黑头鲦、川鲽、大口黑鲈等最新定名为ρ型的sGST氨基酸同源性较高,ρ型sGST为水生生物所特有并共同占据进化树上独立的分枝;与大鼠、小鼠、人等哺乳动物sGST现有所有类型同源性均很低,并且在进化树上距离也较远,表明本研究成功克隆的sGST基因应属于ρ型,可能在鱼类等水生生物对水栖环境的适应上有重要作用。     

离子色谱分析在黄土和粉尘研究中的应用

黄土中存在着大量的碱金属及碱土金属，以往的测试方法多为原子吸收和ICP—MS，离子色谱法在测试黄土样品的碱金属和碱土金属元素含量中应用不多。将黄土地质标准样品进行消解后用离子色谱进行测试，测试效果良好，重复测试的相对标准偏差小于5％，与推荐值的相对误差小于5％，准确度和精密度符舍相关的质量控制要求。本实验方法测试的离子含量都在仪器响应呈线性的最佳测试范围之内，标准曲线经回归后相关系数均达到0．9999。黄土样品的分析结果与粉尘气溶胶样品的离子分析结果对比表明，此方法对于探讨粉尘起源以及沙尘暴天气的研究具有重要意义。     

南极中山站大气气溶胶的化学组成及其来源的判别

从1998年3月7日至1999年11月23日历时21个月，在南极中山站连续采集89个海洋气溶胶样品，本文提供全部样品的13种化学元素Cu、Pb、Zn、Cd、Fe、Al、Mn、Cr、V、K、Na、Ca、Mg含量的实测值．研究表明中山站气溶胶化学成份的含量具有季节性变化的特征．通过相关分析、因子分析、富集因子等方法判别不同时间段中山站气溶胶化学成份的来源。     

南极长城站地区现代环境地球化学特征

本文通过环境背景值、风化壳地球化学、对流层(大气气溶胶)地球化学和人为地球化学异常,初步探讨了南极长城站地区的现代环境地球化学特征。分析表明:环境要素固有的地球化学性质、区域环境条件和自然环境演变之间具有深刻的内在联系。     

Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.