The Bear Brook Watershed in Maine: Multi-decadal whole-watershed experimental acidification

The Bear Brook Watershed in Maine (BBWM) is a long-term research site established to study the response of forest ecosystem function to environmental disturbances of chronic acidic deposition and ecosystem nitrogen enrichment. Starting in 1989, the West Bear (treated) watershed received bimonthly applications of ammonium sulfate [(NH₄)₂SO₄] fertilizer from above the canopy, whereas East Bear (reference) received ambient deposition. The treatments were stopped in 2016, marking the beginning of the recovery phase. Research at the site has focused on soils, streams, and vegetation. Here, we describe data collected over three decades at the BBWM—input and stream output nutrient fluxes, quantitative soil pits and soil chemistry, and soil temperature and moisture.     

High-frequency monitoring of hydrological and biogeochemical fluxes in forested catchments of southern Chile

The variability of rainfall-dependent streamflow at catchment scale modulates many ecosystem processes in wet temperate forests. Runoff in small mountain catchments is characterized by a quick response to rainfall pulses which affects biogeochemical fluxes to all downstream systems. In wet-temperate climates, water erosion is the most important natural factor driving downstream soil and nutrient losses from upland ecosystems. Most hydrochemical studies have focused on water flux measurements at hourly scales, along with weekly or monthly samples for water chemistry. Here, we assessed how water and element flows from broad-leaved, evergreen forested catchments in southwestern South America, are influenced by different successional stages, quantifying runoff, sediment transport and nutrient fluxes during hourly rainfall events of different intensities. Hydrograph comparisons among different successional stages indicated that forested catchments differed in their responses to high intensity rainfall, with greater runoff in areas covered by secondary forests (SF), compared to old-growth forest cover (OG) and dense scrub vegetation (CH). Further, throughfall water was greatly nutrient enriched for all forest types. Suspended sediment loads varied between successional stages. SF catchments exported 455 kg of sediments per ha, followed by OG with 91 kg/ha and CH with 14 kg/ha, corresponding to 11 rainfall events measured from December 2013 to April 2014. Total nitrogen (TN) and phosphorus (TP) concentrations in stream water also varied with rainfall intensity. In seven rainfall events sampled during the study period, CH catchments exported less nutrients (46 kg/ha TN and 7 kg/ha TP) than SF catchments (718 kg/ha TN and 107 kg/ha TP), while OG catchments exported intermediate sediment loads (201 kg/ha TN and 23 kg/ha TP). Further, we found significant effects of successional stage attributes (vegetation structure and soil physical properties) and catchment morphometry on runoff and sediment concentrations, and greater nutrients retention in OG and CH catchments. We conclude that in these southern hemisphere, broad-leaved evergreen temperate forests, hydrological processes are driven by multiple interacting phenomena, including climate, vegetation, soils, topography, and disturbance history.     

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.     

Detrital zircon provenance of Neoproterozoic to Cenozoic deposits in Iran: Implications for chronostratigraphy and collisional tectonics

Ion-microprobe U–Pb analyses of 589 detrital zircon grains from 14 sandstones of the Alborz mountains, Zagros mountains, and central Iranian plateau provide an initial framework for understanding the Neoproterozoic to Cenozoic provenance history of Iran. The results place improved chronological constraints on the age of earliest sediment accumulation during Neoproterozoic–Cambrian time, the timing of the Mesozoic Iran–Eurasia collision and Cenozoic Arabia–Eurasia collision, and the contribution of various sediment sources of Gondwanan and Eurasian affinity during opening and closure of the Paleotethys and Neotethys oceans. The zircon age populations suggest that deposition of the extensive ~ 1 km-thick clastic sequence at the base of the cover succession commenced in latest Neoproterozoic and terminated by Middle Cambrian time. Comparison of the geochronological data with detrital zircon ages for northern Gondwana reveals that sediment principally derived from the East African orogen covered a vast region encompassing northern Africa and the Middle East. Although most previous studies propose a simple passive-margin setting for Paleozoic Iran, detrital zircon age spectra indicate Late Devonian–Early Permian and Cambrian–Ordovician magmatism. These data suggest that Iran was affiliated with Eurasian magmatic arcs or that rift-related magmatic activity during opening of Paleotethys and Neotethys was more pronounced than thought along the northern Gondwanan passive-margin. For a Triassic–Jurassic clastic overlap assemblage (Shemshak Formation) in the Alborz mountains, U–Pb zircon ages provide chronostratigraphic age control requiring collision of Iran with Eurasia by late Carnian–early Norian time (220–210 Ma). Finally, Cenozoic strata yield abundant zircons of Eocene age, consistent with derivation from arc magmatic rocks related to late-stage subduction and/or breakoff of the Neotethys slab. Together with the timing of foreland basin sedimentation in the Zagros, these detrital zircon ages help bracket the onset of the Arabia–Eurasia collision in Iran between middle Eocene and late Oligocene time.     

Tectono-sedimentary framework of the Gachsaran Formation in the Zagros foreland basin

Continental collision between Iranian and Arabian plates resulted in the formation of the Zagros fold–thrust belt and its associated foreland basin. During convergence, pre-existing faults in the basement were reactivated and the sedimentary cover was shortened above two different types of basal decollement (viscous/frictional). This led to heterogeneous deformation which segmented not only the Zagros fold–thrust belt but also its foreland basin into different compartments resulting in variation in facies, thickness and age of the sediment infill.Based on this concept, a new tectono-sedimentary model is proposed for one of the most important syn-tectonic sedimentary unit, the Gachsaran salt in the Zagros foreland basin. In this proposed model, it is argued that differential propagation of the deformation front above decollements with different mechanical properties (viscous versus frictional) results in along-strike irregularity of the Zagros deformation front whereas movement along pre-existing basement faults leads to development of barriers across the Zagros basin. The irregularity of the deformation front and the cross-basin barriers divided the Zagros foreland basin into six almost alternating sub-basins where Gachsaran salt and its non-salt equivalents are deposited. In the salt sub-basins, two different processes were responsible for the deposition of Gachsaran salt: (1) evaporation, and (2) dissolution of extruding Hormuz salt and its re-precipitation as Gachsaran salt. Re-precipitation was probably the most significant process responsible for the huge deposit of Gachsaran salt in the extreme south-east part of the Zagros foreland basin.     

The impact of cover rock rheology on the style of folding in the Zagros fold-thrust belt

The present day morphology of the Zagros fold-thrust belt is dominated by magnificent exposures of NW–SE trending folds. These folds differ in their size and geometry and these differences are related mainly to the rheological profile of the cover rock. The cover rock succession of the Zagros consists of a sequence of competent and incompetent units which vary both along and across the belt. Field based study combined with the use of satellite images reveals that the thickness and facies distribution of the cover rock succession has a significant impact on the style of deformation. During the shortening linked to the current convergence of the Arabian and Iranian plates, the incompetent units act as detachment horizons which localise thrusting and which act as décollement above which detachment folds form. In addition, where these incompetent units are thick (e.g.> 1 km), they allow the deformation above and below them to become completely decoupled enabling disharmonic folding to occur. As a result the folds above and below the incompetent units in the central part of the Zagros Folded Belt, have significantly different geometries and wavelengths. As the Zagros folds host the majority of the hydrocarbon reserves in Iran and Iraq, an understanding of the processes that influence their geometry and spatial organization at different levels in the cover rock is crucial for the future exploration in the region.     

A new tectonic scenario for the Sanandaj–Sirjan Zone (Iran)

Recent geochemical studies of volcanic rocks forming part of the ophiolites within the Zagros and Naien-Baft orogen indicate that most of them were developed as supra-subduction ophiolites in intra-oceanic island arc environments. Intra-oceanic island arcs and ophiolites now forming the Naien-Baft zone were emplaced southwestward onto the northeastern margin of the South Sanandaj–Sirjan Zone, while those now in the High Zagros were emplaced southwestward onto the northern margin of Arabia. Thereafter, subduction continued on opposite sides of the remnant oceans. The floor of Neo-Tethys Ocean was subducted at a low angle beneath the entire Sanandaj–Sirjan Zone, and the floor of the Naien-Baft Ocean was subducted beneath the Central Iranian Micro-continent. The Naien-Baft Ocean extended into North-West Iran only temporarily. This failed ocean arm (between the Urumieh-Dokhtar Magmatic Assemblage and the main Zagros Thrust) was filled by thick Upper Triassic–Upper Jurassic sediments. The Naien-Baft Ocean finally closed in the Paleocene and Neo-Tethys closed in the Early to Middle Eocene. After Arabia was sutured to Iran, the Urumieh-Dokhtar Magmatic Assemblage recorded slab break-off in the Middle Eocene.     

Determination of Roughness Lengths for Heat and Momentum Over Boreal Forests

The roughness length for momentum (z_0m), zero-plane displacementheight (d), and roughness length for heat (z_0h) are importantparameters used to estimate land-atmosphere energy exchange. Although many different approaches have been developed to parameterizemomentum and heat transfer, existing parameterizations generally utilizehighly simplified representations of vegetation structure. Further, a mismatch exists between the treatments used for momentum and heat exchange and those used for radiative energy exchanges. In this paper, parameterizations are developed to estimate z_0m, d, and z_0h for forested regimes using information related to tree crown density and structure. The parameterizations provide realistic representationfor the vertical distribution of foliage within canopies, and include explicit treatment for the effects of the canopy roughness sublayer and leaf drag on momentum exchange. The proposed parameterizationsare able to realistically account for site-to-site differences in roughness lengths that arise from canopy structural properties.Comparisons between model predictions and field measurements show good agreement, suggesting that the proposed parameterizations capture the most important factors influencing turbulent exchange of momentumand heat over forests.     

Mountain Protection Forests against Natural Hazards and Risks: New French Developments by Integrating Forests in Risk Zoning

Forests can play a very significant role in protection against natural hazards and risks in mountain lands, especially against erosion and rockfalls. This paper first assesses knowledge concerning the capacity of forests to control natural hazards, with emphasis placed on forest location in catchments or slopes. Zoning aspects are then presented; based on the use of GIS, they allow determining priorities for forestry operations (cuts and biological engineering), in view to setting up an 'optimal management' of mountain forest ecosystems. Finally, an explanation is given of how the results of research are used for the management and planning of mountain ecosystems, illustrated by an example of researcher-practitioner transfer in France. Zoning, prevention, display and regular aspects are developed. On the basis of the experience and knowledge presented here, recommendations are proposed to better take into account the role of mountain forests in the control of natural hazards and risks. It is necessary to have an adapted legislative and economic framework, define priority forest intervention zones and determine an adapted sylviculture.     

Doing groups: Situating knowledge and creating stories

This paper presents group research as a potentially powerful research tool for cultural geographers interested in the ways knowledge is produced at the interpersonal level. I argue that groups can create unique research spaces that incorporate 'sociality', the everyday social norms, logics and languages that guide ordinary conversations, into the research agenda. By concentrating on these discursive norms, insights can be obtained into the ways that knowledge is negotiated, produced and constrained in different places. To demonstrate the value of group research, a case study involving Australian environmentalists is analysed, to show how forests are constructed, contested and naturalised within this particular subculture. The article concludes by emphasising the importance of group research to critical geographers interested in social empowerment and change.