九龙江流域水葫芦打捞去除水体营养盐模型研究

水葫芦被收获时,水体中的营养盐也将包含在植物组织中而被去除.本研究首先通过野外实验和参考国内外有关文献,建立了九龙江流域水葫芦生长数学模型和持续生产模型,确定了模型的各有关参数:水葫芦生长容量K值为25.6 kg/m2、最大生长速率rmax为0.12d-1;水体中氮和磷的半饱和系数hN和hP值分别为0.2和0.03;水葫芦最低生长温度(mθin)为7℃,最适水温(oθpt)为30℃,最高生长温度(θmax)为40℃.随后采用所建立的模型计算了研究区水葫芦打捞的营养盐去除效果,研究区面积6 000m2的水体实施水葫芦打捞策略后,1a所能收获的水葫芦最大产量为9.18×105kg,去除的TP为214.4kg,TN为966.6kg.     

一种新的海洋风场反演中风向模糊排除方法研究

本文给出了一种从ＳＡＳＳ测量的后向散射强度手数据中反演出大尺度海洋风场的新方法。计算结果与Ｐｅｔｅｈｅｒｙｃｈ等利用ＳＡＳＳ表面风分析的结果比较在风向上是吻合的，在风速上本文所得结果更宇海面赵实风速。上述结果说明本文所采用的多解排除对两波束散射计探测海面风场的反演是成功的。     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.     

XANES analysis of the mechanisms of arsenic removal in biological iron and manganese treatment unit

Biological iron and manganese removal utilizing indigenous iron and manganese oxidizing bacteria （IRB hereafter） in groundwater can also be applied to arsenic removal according to our pilot-scale test. The arsenic removal probably occurred through sorption and complexation of arsenic to iron and manganese oxides formed by enzymic action of IRB. We investigated the chemical properties of iron and manganese oxides in IRB floc and the valence state of arsenic sorbed to the floc to clarify the mechanisms of the arsenic [especially As （Ⅲ）] removal. The floc samples were collected from two drinking water plants using IRB （Jyoyo and Yamatokoriyama, Japan）, and our pilot - scale test site where arsenic and iron removal using IRB is under way （Mukoh, Japan）. The Jyoyo and Yamatokoriyama IRB floc samples were subjected to As （Ⅲ） and As（Ⅴ） sorption experiments. The elemental composition of the floc samples was measured. XANES spectra were collected on As, Fe and Mn K-edges at synchrotron radiation facility Spring 8 （Hyogo, Japan）. FT-IR and the X-ray diffraction spectra of the samples were also obtained. The IRB floc contained ca. 35 % Fe, 0.3%-3.5% Mn and 2%-6% P. The samples were highly amorphous and contained ferrihidrites and hydrated iron phosphate. According to XANES analyses of IRB, As associated with IRB was in ＋5 valence state when As （Ⅲ） （or As （Ⅴ）） was added in laboratory sorption test, Fe in ＋3 valence state, and Mn a mixture of＋3 and ＋4 valence states. Small shift was observed in the XANES spectra of IRB on As K-edge as the equilibration time of the sorption experiment was increased. Gradual oxidation of a small amount of As （Ⅲ） associated with IRB or change in arsenic binding with sorption site were the probable mechanism.     

Treatment of high fluoride concentration wastewater by layered double hydroxides： Mechanism studies

An appropriate concentration of fluoride in drinking water is required to prevent dental cavities, but long-term ingestion of water that contains more than a suitable level of fluoride can cause bone disease and mottling of the teeth. Fluoride ions can be found in wastewater from the fluoride chemical industry, as well as the semiconductor, metal processing, fertilizer, and glass-manufacturing industries. The discharge standard for fluoride in industrial wastewater in China is 10 mg/L. Efficient treatment of fluoride-containing wastewater is therefore of major concern in China, following the rapid development of the fluoride chemical industry. Several methods have been used to remove fluoride from water, such as adsorption, chemical precipitation, electrodialysis, ion exchange and electrochemical processes. Layered double hydroxides （LDHs） are anionic clays with high anion exchange capacities which are effective adsorbents for removal of a variety of anionic pollutants. LDHs have been studied as potential adsorbents for removing toxic anionic species such as CrO4^2-, TcO4^-, SeO3^2-, pesticides, and anionic surfactants from aqueous systems. One of the main attractions of using LDHs for fluoride removal, is that unlike other chemical treatment methods, no chemical sludge should be produced. In the present study, an attempt was made to investigate the mechanism of fluoride removal by LDHs under different conditions using batch methods. In addition, the release of fluoride adsorbed on LDHs by treatment with an aqueous solution of Na2CO3 was studied. The residual fluoride was found to be 10 mg/L in a solution with an initial concentration of 1000 mg/L, which meets the discharge standard for fluoride in industrial wastewater in China.     

Flotation and depression control of arsenopyrite through pH and pulp redox potential using xanthate as the collector

The role of pH and pulp redox potential (E_H) to control the flotation and depression of arsenopyrite has been investigated through studies on microflotation of arsenopyrite crystals and batch flotation of an arsenopyritic ore using isopropyl xanthate as collector. The transition between flotation and depression of arsenopyrite is established by the reversible potential of the xanthate/dixanthogen couple. Adsorption of arsenate ions on ferric hydroxide has been studied through electrokinetics to delineate mechanisms involved in the depression of arsenopyrite using oxidants. Chemical binding between arsenate species and ferric hydroxide sites on arsenopyrite is suggested as the mechanism responsible for depression of arsenopyrite. E_H conditions are given for the flotation and depression of arsenopyite at various pH values for the arsenopyritic ore.     

环境矿物材料治理镉（Cd^2＋）污染研究进展

近年来,环境矿物材料以其经济、有效、无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多优势,可替代传统的镉污染处理方法。本文综述了国内外环境矿物材料在处理镉污染方面的研究进展,并对今后应用环境矿物材料治理镉污染提出了一些建议。     

剥蚀及地幔作用下青藏高原隆升过程的数值模拟

修改了England和Mckenzie的黏性薄层流变模型中控制大陆形变的连续性方程,将剥蚀作用对高原隆升演化的影响直接引入该方程,并考虑下伏地幔小尺度对流对增厚岩石层的搬离作用对高原隆升演化后期的影响,用有限差分法直接模拟青藏高原隆升过程. 数值模拟结果所显示的高原隆升演化过程与实际观测资料吻合较好,揭示了高原隆升演化过程的非平稳和多阶段的特性;同时还表明上地幔小尺度对流对岩石层底部的搬离作用可能是最近8Ma以来高原快速隆升的主导机制.     

SMBR中污染物处理效率随污泥浓度变化的数学模型

以一体式膜生物反应器(SMBR)对生活污水进行处理,研究不同水力停留时间(HRT)条件下污泥浓度对有机物去除率的影响,并对所得试验数据进行曲线拟合,建立有机物去除率与污泥浓度的数学模型。试验结果表明:在溶解氧(DO)浓度为2.0～3.0mg/L的条件下,HRT为3h、2h和1h时,有机物去除率(η)随着污泥浓度的增大而增大,但当污泥浓度增大到6000mg/L时,η增大趋势逐渐减小,并趋于稳定。有机物去除率与污泥浓度的数学模型表明:有机物去除率(η)与水力停留时间(τ)、进水COD浓度(S_o)和污泥负荷率(N_s)等主要运行参数有关,并可以通过调节运行参数τ、S_o和N_s来达到所需要的COD去除率。