东海陆架盆地与松辽盆地的类比分析

松辽盆地在我国的含油气盆地中勘探程度较高，已探明了几十亿吨的地质储量，对控制盆地油气形成的生、储、盖、圈、运、保等条件的研究也比较深入和细致，东海陆架盆地是我国目前勘探程度较低却有很大油气远景的盆地，这两个盆地都是我国东部中新生代大型复合沉积盆地，在地质构造上具有一定的相似性。本文试图通过东海陆架盆地与松辽盆地的对比在研究它们各自特征的基础上，寻找这两个大型沉积盆地的共同点和相似性，以便借鉴松辽盆     

A laboratory experiment to monitor the contact state of a fault by transmission waves

We performed a series of laboratory experiments in which elastic waves were transmitted across a simulated fault. Two types of experiments were carried out: (1) Normal Stress Holding Test (NSHT): normal stress was kept constant for about 3 h without shear stress and transmission waves were observed. (2) Shear Stress Increasing Test (SSIT): shear stress was gradually increased until a stick-slip event occurred. Transmission waves were continuously observed throughout the process of stress accumulation. We focused on the change in transmission waves during the application of shear stress and especially during precursory slips.It was found in NSHT that the amplitude of transmission waves linearly increased with the logarithm of stationary contact time. The increase amounted to a few percent after about 3 h. Creep at asperity contacts is responsible for this phenomenon. From a theoretical consideration, it was concluded that the real contact area increased with the logarithm of stationary contact time.We observed in SSIT a significant increase in wave amplitude with shear stress application. This phenomenon cannot be attributed to the time effect observed in NSHT. Instead, it can be explained by the mechanism of “junction growth” proposed by Tabor. Junction growth yields an increase in real contact area. It is required for junction growth to occur that the material in contact is already plastic under a purely normal loading condition. A computer simulation confirmed that this requirement was satisfied in our experiments. We also found that the rate at which the amplitude increased was slightly reduced prior to a stick-slip event. The onset time of the reduction well coincides with the onset of precursory slip. The cause of the reduction is attributed to the reset of stationary contact time due to displacement. This interpretation is supported by the result of NSHT. Taking the time of stationary contact in SSIT into account, we may expect the change in wave amplitude to be, at most, only a few percent. The observed slight reduction in increasing rate is, in this sense, reasonable. The static stiffness of the fault also decreases with precursory slip. It was also found that low frequency waves are a better indicator of precursory slip than high frequency waves. This might suggest that low frequency waves with longer wavelength are a better indicator of average behavior of faults. The problem, however, merits a further investigation. The shifts in phase were also found to be a good indicator of the change in contact state of the fault. The changes in both amplitude and phase of transmission waves are unifyingly understood through the theory of transmission coefficient presented by Pyrak-Nolte et al. Rough surfaces have a tendency to give larger stick-slips than smooth surfaces. The amount of precursory slip is larger for rough surfaces than for smooth surfaces. Although it was confirmed by a computer simulation that rough surfaces have larger contact diameters than smooth surfaces, the rigorous relationship between the surface roughness (contact diameter) and the amount of precursory slips was not established.     

石太线下行K135滑坡特征与成因分析

滑坡位于石太线下行K135路段右侧偏西，平面上呈近似椭圆形，由原有老滑坡复活而形成。根据滑坡勘察，滑坡所处地貌单元属侵蚀剥蚀低中山区，滑坡区地层组成为第四系松散堆积物下伏晚古生代二叠系石千峰组泥岩、砂岩互层。在分析滑坡几何特征、地质构造特征、水文地质条件及滑坡变形破坏特征的基础上，探讨了滑坡的成因，认为老滑坡的成因以自然形成为主，新滑坡则发育并活动于老滑坡堆积物中，因某部门在老滑坡体前缘修建收费站，进行了大面积不适当的工程开挖，形成临空面，加之降雨的作用降低了土体的粘聚力及抗剪强度，在上覆岩土体的重力作用下形成新滑坡。老滑坡为巨型厚层滑坡，属于自然滑坡，新滑坡为大型中层滑坡，属于工程滑坡。     

Predictive instantaneous optimal control of inelastic structures during earthquakes

A new inelastic structural control algorithm is proposed by incorporating the force analogy method (FAM) with the predictive instantaneous optimal control (PIOC) algorithm. While PIOC is very effective in compensating for the time delay for elastic structures, the FAM is highly efficient in performing the inelastic analysis. Unlike conventional inelastic analysis methods of changing stiffness, the FAM analyzes structures by varying the structural displacement field, and therefore the state transition matrix needs to be computed only once. This greatly simplifies the computation and makes inelastic analysis readily applicable to the PIOC algorithm. The proposed algorithm compensates for the time delay that happens in practical control systems by predicting the inelastic structural response over a period that equals the magnitude of the time delay. A one‐story frame with both strain‐hardening and strain‐softening inelastic characteristics is analyzed using this algorithm. Results show that the proposed control algorithm is feasibile for any inelastic structures. While the control efficiency deteriorates with the increase in magnitude of the time delay, the PIOC maintains acceptable performance within a wide range of time delay magnitudes. Finally, a computer model of a six‐story moment‐resisting steel frame is analyzed to show that PIOC has good control results for real inelastic structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Genetic Analogy Between Sediment—Hosted Gold Deposits and Sediment—Hosted Copper Deposits in Southwest China

The sediment-hosted copper deposits according to the authors‘ study were formed from connate formation water during the post-sedimentary or diagenetic stage while the sediment-hosted disseminated gold deposits are unanimously considered to be of post-sedimentary hydrothermal origin.Therefore,apart from their own individulities.These two types of deposits must share some characters in common.Comparisons are attempted,in this paper,between the sediment-hosted copper deposits in southwest China and the Triassic sediment-hosted disseminated gold deposits in the Yunnan-Guizhou-Guangxi Triangle in terms of geological and geochemical features.     

黄渤海大风的客观相似预报

以MICAPS资料为基础，海平面气压资料为指标，设计了一种通过计算相似系数查找相似形势，制作黄、渤海地区24h大风的客观预报方法，并建立了包括109个大风历史个例资料库。试验结果表明，风速预报的平均误差在20％以下，满足大风预报业务的要求。相似法具有不需依赖国外资料及计算简单迅速的特点，它不仅是现在日常业务的一个补充，更重要的是，它是一种可以在战争等非常情况下使用的预报方法。     

用远场辐射场反演云闪放电参数

用地面电磁场遥感闪电放电参数无论是在实际应用还是理论研究中都具有重要意义。文中基于电流传输线模式 ,提出了一种用单站远场VLF/LF辐射场反演云内放电参数的简便方法。当传输线电流从底部传播到顶部的时间只有几微秒时 ,整个传输线的VLF/LF辐射可以近似成偶极子辐射 ,即远场辐射场与电流的时间变化率和传输线长度的乘积成正比。因此 ,对远场辐射场做时间积分就能获得完整的电流矩波形 (上升沿有所加宽 ) ,而且传输线模式中的重要参数 ,电流从底部传播到顶端经历的时间 ,也可以近似地用辐射场时间积分幅度与辐射场幅度之比来估计。这一方法具有估计云闪双极性大脉冲辐射过程的放电参数的潜力。     

深层水泥土搅拦桩在软土地基处理中的应用

通过对深层水泥土搅拌桩的加固机理及复合地基承载力性状的简要分析,根据国家现行规范,结合具体地基处理工程实例,对深层水泥搅拌桩在软土地区地基加固处理中的方案选择、设计、施工及检测中的常见技术要点作初步探讨。     

Formation and shortening deformation of a back-arc rift basin revealed by deep seismic profiling, central Japan

The northern Fossa Magna (NFM) basin is a Miocene rift system produced in the final stages of the opening of the Sea of Japan. It divides the major structure of Japan into two regions, with north-trending geological structures to the NE of the basin and EW trending structures to the west of the basin. The Itoigawa-Shizuoka Tectonic Line (ISTL) bounds the western part of the northern Fossa Magna and forms an active fault system that displays one of the largest slip rates (4–9 mm/year) in the Japanese islands. Deep seismic reflection and refraction/wide-angle reflection profiling were undertaken in 2002 across the northern part of ISTL in order to delineate structures in the crust, and the deep geometry of the active fault systems. The seismic images are interpreted based on the pattern of reflectors, the surface geology and velocities derived from refraction analysis. The 68-km-long seismic section suggests that the Miocene NFM basin was formed by an east dipping normal fault with a shallow flat segment to 6 km depth and a deeper ramp penetrating to 15 km depth. This low-angle normal fault originated as a comparatively shallow brittle/ductile detachment in a high thermal regime present in the Miocene. The NFM basin was filled by a thick (>6 km) accumulation of sediments. Shortening since the late Neogene is accommodated along NS to NE–SE trending thrust faults that previously accommodated extension and produce fault-related folds on their hanging wall. Based on our balanced geologic cross-section, the total amount of Miocene extension is ca. 42 km and the total amount of late Neogene to Quaternary shortening is ca. 23 km.     

Characteristics and genesis of maghemite in Chinese loess and paleosols: Mechanism for magnetic susceptibility enhancement in paleosols

Morphological characteristics and microstructures of magnetic minerals extracted from Chinese loess and paleosols were investigated using powder X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). Our results indicate that maghemite in loess–paleosol sequences was transformed from magnetite through oxidation of magnetite. Maghemite transformed from eolian magnetite during chemical weathering has low-angle grain boundaries among maghemite nano-crystals. Some nano-crystalline maghemites with nanoporous texture resulted from microbe-induced precipitation of magnetite or transformation of poorly crystalline ferric Fe (oxy)hydroxides in presence of Fe-reducing bacteria. Aggregates of euhedral maghemite nano-crystals were transformed from magnetite magnetosomes. Both microbe-induced nanoporous magnetite and microbe-produced magnetite magnetosomes are directly related to microbial activities and pedogenesis of the paleosols. It is proposed that the formation of nano-crystalline maghemite with superparamagnetic property in paleosol results in the enhancement of magnetic susceptibility, although the total amount (weight percent) of magnetic minerals in both paleosol and loess units is similar. Our results also show that nano-crystalline and nanoporous magnetite grains prefer to transform into maghemite in semi-arid soil environments instead of hematite, although hematite is a thermodynamically stable phase. This result also indicates that a decrease in crystal size will increase stability of maghemite. It is also inferred that surface energy of maghemite is lower than that of hematite.